Kabbone/nixos-config
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Compare commits

base: Kabbone:main
Branches Tags
Kabbone:main
Kabbone:dev
Kabbone:refactor
..
compare: Kabbone:refactor
Branches Tags
Kabbone:main
Kabbone:dev
Kabbone:refactor

No commits in common. "main" and "refactor" have entirely different histories.
main ... refactor

133 changed files with 1265 additions and 5652 deletions
Show Stats Expand all files Collapse all files

4
disko/btrfs.nix
View File

@ -13,7 +13,7 @@
content = {
type = "filesystem";
format = "vfat";
extraArgs = [ "-n" "NIXBOOT" ];
extraArgs = [ "-n NIXBOOT" ];
mountpoint = "/boot";
mountOptions = [
"defaults"
@ -24,7 +24,7 @@
size = "100%";
content = {
type = "btrfs";
extraArgs = [ "-f" "-L" "NIXROOT" ];
extraArgs = [ "-f -L NIXROOT" ];
subvolumes = {
"@" = {
mountpoint = "/";

4
disko/btrfs_luks.nix
View File

@ -47,10 +47,6 @@
mountpoint = "/nix";
mountOptions = [ "compress=zstd" "noatime" "ssd" "discard=async" ];
};
"@opt" = {
mountpoint = "/opt";
mountOptions = [ "compress=zstd" "noatime" "ssd" "discard=async" ];
};
"@snapshots" = {
mountpoint = "/mnt";
mountOptions = [ "compress=zstd" "noatime" "ssd" "discard=async" ];

11
disko/mount.sh
View File

@ -1,11 +0,0 @@
#!/usr/bin/env bash
disk="/dev/vda"
mountpoint="/mnt"
mount $disk $mountpoint -o compress=zstd,noatime,ssd,space_cache=v2,subvol=@
mount $disk $mountpoint/home -o compress=zstd,noatime,ssd,space_cache=v2,subvol=@home
mount $disk $mountpoint/var -o compress=zstd,noatime,ssd,space_cache=v2,subvol=@var
mount $disk $mountpoint/srv -o compress=zstd,noatime,ssd,space_cache=v2,subvol=@srv
mount $disk $mountpoint/nix -o compress=zstd,noatime,ssd,space_cache=v2,subvol=@nix
mount $disk $mountpoint/swap -o compress=zstd,noatime,ssd,space_cache=v2,subvol=@swap

459
flake.lock generated
View File

@ -10,11 +10,11 @@
"systems": "systems"
},
"locked": {
"lastModified": 1754433428,
"narHash": "sha256-NA/FT2hVhKDftbHSwVnoRTFhes62+7dxZbxj5Gxvghs=",
"lastModified": 1715290355,
"narHash": "sha256-2T7CHTqBXJJ3ZC6R/4TXTcKoXWHcvubKNj9SfomURnw=",
"owner": "ryantm",
"repo": "agenix",
"rev": "9edb1787864c4f59ae5074ad498b6272b3ec308d",
"rev": "8d37c5bdeade12b6479c85acd133063ab53187a0",
"type": "github"
},
"original": {
@ -24,12 +24,18 @@
}
},
"crane": {
"inputs": {
"nixpkgs": [
"lanzaboote",
"nixpkgs"
]
},
"locked": {
"lastModified": 1754269165,
"narHash": "sha256-0tcS8FHd4QjbCVoxN9jI+PjHgA4vc/IjkUSp+N3zy0U=",
"lastModified": 1711299236,
"narHash": "sha256-6/JsyozOMKN8LUGqWMopKTSiK8N79T8Q+hcxu2KkTXg=",
"owner": "ipetkov",
"repo": "crane",
"rev": "444e81206df3f7d92780680e45858e31d2f07a08",
"rev": "880573f80d09e18a11713f402b9e6172a085449f",
"type": "github"
},
"original": {
@ -46,11 +52,11 @@
]
},
"locked": {
"lastModified": 1744478979,
"narHash": "sha256-dyN+teG9G82G+m+PX/aSAagkC+vUv0SgUw3XkPhQodQ=",
"lastModified": 1700795494,
"narHash": "sha256-gzGLZSiOhf155FW7262kdHo2YDeugp3VuIFb4/GGng0=",
"owner": "lnl7",
"repo": "nix-darwin",
"rev": "43975d782b418ebf4969e9ccba82466728c2851b",
"rev": "4b9b83d5a92e8c1fbfd8eb27eda375908c11ec4d",
"type": "github"
},
"original": {
@ -60,14 +66,66 @@
"type": "github"
}
},
"devshell": {
"inputs": {
"flake-utils": "flake-utils_3",
"nixpkgs": [
"nixvim",
"nixpkgs"
]
},
"locked": {
"lastModified": 1713532798,
"narHash": "sha256-wtBhsdMJA3Wa32Wtm1eeo84GejtI43pMrFrmwLXrsEc=",
"owner": "numtide",
"repo": "devshell",
"rev": "12e914740a25ea1891ec619bb53cf5e6ca922e40",
"type": "github"
},
"original": {
"owner": "numtide",
"repo": "devshell",
"type": "github"
}
},
"flake-compat": {
"flake": false,
"locked": {
"lastModified": 1747046372,
"narHash": "sha256-CIVLLkVgvHYbgI2UpXvIIBJ12HWgX+fjA8Xf8PUmqCY=",
"lastModified": 1696426674,
"narHash": "sha256-kvjfFW7WAETZlt09AgDn1MrtKzP7t90Vf7vypd3OL1U=",
"owner": "edolstra",
"repo": "flake-compat",
"rev": "9100a0f413b0c601e0533d1d94ffd501ce2e7885",
"rev": "0f9255e01c2351cc7d116c072cb317785dd33b33",
"type": "github"
},
"original": {
"owner": "edolstra",
"repo": "flake-compat",
"type": "github"
}
},
"flake-compat_2": {
"locked": {
"lastModified": 1696426674,
"narHash": "sha256-kvjfFW7WAETZlt09AgDn1MrtKzP7t90Vf7vypd3OL1U=",
"rev": "0f9255e01c2351cc7d116c072cb317785dd33b33",
"revCount": 57,
"type": "tarball",
"url": "https://api.flakehub.com/f/pinned/edolstra/flake-compat/1.0.1/018afb31-abd1-7bff-a5e4-cff7e18efb7a/source.tar.gz"
},
"original": {
"type": "tarball",
"url": "https://flakehub.com/f/edolstra/flake-compat/1.tar.gz"
}
},
"flake-compat_3": {
"flake": false,
"locked": {
"lastModified": 1696426674,
"narHash": "sha256-kvjfFW7WAETZlt09AgDn1MrtKzP7t90Vf7vypd3OL1U=",
"owner": "edolstra",
"repo": "flake-compat",
"rev": "0f9255e01c2351cc7d116c072cb317785dd33b33",
"type": "github"
},
"original": {
@ -84,11 +142,11 @@
]
},
"locked": {
"lastModified": 1754091436,
"narHash": "sha256-XKqDMN1/Qj1DKivQvscI4vmHfDfvYR2pfuFOJiCeewM=",
"lastModified": 1709336216,
"narHash": "sha256-Dt/wOWeW6Sqm11Yh+2+t0dfEWxoMxGBvv3JpIocFl9E=",
"owner": "hercules-ci",
"repo": "flake-parts",
"rev": "67df8c627c2c39c41dbec76a1f201929929ab0bd",
"rev": "f7b3c975cf067e56e7cda6cb098ebe3fb4d74ca2",
"type": "github"
},
"original": {
@ -97,16 +155,88 @@
"type": "github"
}
},
"flake-parts_2": {
"inputs": {
"nixpkgs-lib": [
"nixvim",
"nixpkgs"
]
},
"locked": {
"lastModified": 1715865404,
"narHash": "sha256-/GJvTdTpuDjNn84j82cU6bXztE0MSkdnTWClUCRub78=",
"owner": "hercules-ci",
"repo": "flake-parts",
"rev": "8dc45382d5206bd292f9c2768b8058a8fd8311d9",
"type": "github"
},
"original": {
"owner": "hercules-ci",
"repo": "flake-parts",
"type": "github"
}
},
"flake-root": {
"locked": {
"lastModified": 1713493429,
"narHash": "sha256-ztz8JQkI08tjKnsTpfLqzWoKFQF4JGu2LRz8bkdnYUk=",
"owner": "srid",
"repo": "flake-root",
"rev": "bc748b93b86ee76e2032eecda33440ceb2532fcd",
"type": "github"
},
"original": {
"owner": "srid",
"repo": "flake-root",
"type": "github"
}
},
"flake-utils": {
"inputs": {
"systems": "systems_2"
},
"locked": {
"lastModified": 1731533236,
"narHash": "sha256-l0KFg5HjrsfsO/JpG+r7fRrqm12kzFHyUHqHCVpMMbI=",
"lastModified": 1710146030,
"narHash": "sha256-SZ5L6eA7HJ/nmkzGG7/ISclqe6oZdOZTNoesiInkXPQ=",
"owner": "numtide",
"repo": "flake-utils",
"rev": "11707dc2f618dd54ca8739b309ec4fc024de578b",
"rev": "b1d9ab70662946ef0850d488da1c9019f3a9752a",
"type": "github"
},
"original": {
"owner": "numtide",
"repo": "flake-utils",
"type": "github"
}
},
"flake-utils_2": {
"inputs": {
"systems": "systems_3"
},
"locked": {
"lastModified": 1705309234,
"narHash": "sha256-uNRRNRKmJyCRC/8y1RqBkqWBLM034y4qN7EprSdmgyA=",
"owner": "numtide",
"repo": "flake-utils",
"rev": "1ef2e671c3b0c19053962c07dbda38332dcebf26",
"type": "github"
},
"original": {
"owner": "numtide",
"repo": "flake-utils",
"type": "github"
}
},
"flake-utils_3": {
"inputs": {
"systems": "systems_4"
},
"locked": {
"lastModified": 1701680307,
"narHash": "sha256-kAuep2h5ajznlPMD9rnQyffWG8EM/C73lejGofXvdM8=",
"owner": "numtide",
"repo": "flake-utils",
"rev": "4022d587cbbfd70fe950c1e2083a02621806a725",
"type": "github"
},
"original": {
@ -137,6 +267,28 @@
"type": "github"
}
},
"gitignore_2": {
"inputs": {
"nixpkgs": [
"nixvim",
"pre-commit-hooks",
"nixpkgs"
]
},
"locked": {
"lastModified": 1709087332,
"narHash": "sha256-HG2cCnktfHsKV0s4XW83gU3F57gaTljL9KNSuG6bnQs=",
"owner": "hercules-ci",
"repo": "gitignore.nix",
"rev": "637db329424fd7e46cf4185293b9cc8c88c95394",
"type": "github"
},
"original": {
"owner": "hercules-ci",
"repo": "gitignore.nix",
"type": "github"
}
},
"home-manager": {
"inputs": {
"nixpkgs": [
@ -145,11 +297,11 @@
]
},
"locked": {
"lastModified": 1745494811,
"narHash": "sha256-YZCh2o9Ua1n9uCvrvi5pRxtuVNml8X2a03qIFfRKpFs=",
"lastModified": 1703113217,
"narHash": "sha256-7ulcXOk63TIT2lVDSExj7XzFx09LpdSAPtvgtM7yQPE=",
"owner": "nix-community",
"repo": "home-manager",
"rev": "abfad3d2958c9e6300a883bd443512c55dfeb1be",
"rev": "3bfaacf46133c037bb356193bd2f1765d9dc82c1",
"type": "github"
},
"original": {
@ -165,11 +317,11 @@
]
},
"locked": {
"lastModified": 1754756528,
"narHash": "sha256-W1jYKMetZSOHP5m2Z5Wokdj/ct17swPHs+MiY2WT1HQ=",
"lastModified": 1715930644,
"narHash": "sha256-W9pyM3/vePxrffHtzlJI6lDS3seANQ+Nqp+i58O46LI=",
"owner": "nix-community",
"repo": "home-manager",
"rev": "3ec1cd9a0703fbd55d865b7fd2b07d08374f0355",
"rev": "e3ad5108f54177e6520535768ddbf1e6af54b59d",
"type": "github"
},
"original": {
@ -185,27 +337,48 @@
]
},
"locked": {
"lastModified": 1753592768,
"narHash": "sha256-oV695RvbAE4+R9pcsT9shmp6zE/+IZe6evHWX63f2Qg=",
"lastModified": 1715381426,
"narHash": "sha256-wPuqrAQGdv3ISs74nJfGb+Yprm23U/rFpcHFFNWgM94=",
"owner": "nix-community",
"repo": "home-manager",
"rev": "fc3add429f21450359369af74c2375cb34a2d204",
"rev": "ab5542e9dbd13d0100f8baae2bc2d68af901f4b4",
"type": "github"
},
"original": {
"owner": "nix-community",
"ref": "release-23.11",
"repo": "home-manager",
"type": "github"
}
},
"home-manager_3": {
"inputs": {
"nixpkgs": [
"nixvim",
"nixpkgs"
]
},
"locked": {
"lastModified": 1715930644,
"narHash": "sha256-W9pyM3/vePxrffHtzlJI6lDS3seANQ+Nqp+i58O46LI=",
"owner": "nix-community",
"repo": "home-manager",
"rev": "e3ad5108f54177e6520535768ddbf1e6af54b59d",
"type": "github"
},
"original": {
"owner": "nix-community",
"ref": "release-25.05",
"repo": "home-manager",
"type": "github"
}
},
"impermanence": {
"locked": {
"lastModified": 1737831083,
"narHash": "sha256-LJggUHbpyeDvNagTUrdhe/pRVp4pnS6wVKALS782gRI=",
"lastModified": 1708968331,
"narHash": "sha256-VUXLaPusCBvwM3zhGbRIJVeYluh2uWuqtj4WirQ1L9Y=",
"owner": "nix-community",
"repo": "impermanence",
"rev": "4b3e914cdf97a5b536a889e939fb2fd2b043a170",
"rev": "a33ef102a02ce77d3e39c25197664b7a636f9c30",
"type": "github"
},
"original": {
@ -222,11 +395,11 @@
]
},
"locked": {
"lastModified": 1754639028,
"narHash": "sha256-w1+XzPBAZPbeGLMAgAlOjIquswo6Q42PMep9KSrRzOA=",
"lastModified": 1716107076,
"narHash": "sha256-aB15oIMUv6N/UFsLHzgcGRUvU4YfOjE3gEirIP/k82s=",
"owner": "Jovian-Experiments",
"repo": "Jovian-NixOS",
"rev": "d49809278138d17be77ab0ef5506b26dc477fa62",
"rev": "e8de93b7b4c384650977a20c1f192e23c6e7a12f",
"type": "github"
},
"original": {
@ -240,6 +413,7 @@
"crane": "crane",
"flake-compat": "flake-compat",
"flake-parts": "flake-parts",
"flake-utils": "flake-utils",
"nixpkgs": [
"nixpkgs"
],
@ -247,11 +421,11 @@
"rust-overlay": "rust-overlay"
},
"locked": {
"lastModified": 1754297745,
"narHash": "sha256-aD6/scLN3L4ZszmNbhhd3JQ9Pzv1ScYFphz14wHinfs=",
"lastModified": 1713369831,
"narHash": "sha256-G4OGxvlIIjphpkxcRAkf1QInYsAeqbfNh6Yl1JLy2uM=",
"owner": "nix-community",
"repo": "lanzaboote",
"rev": "892cbdca865d6b42f9c0d222fe309f7720259855",
"rev": "850f27322239f8cfa56b122cc9a278ab99a49015",
"type": "github"
},
"original": {
@ -263,18 +437,18 @@
},
"microvm": {
"inputs": {
"flake-utils": "flake-utils",
"flake-utils": "flake-utils_2",
"nixpkgs": [
"nixpkgs"
],
"spectrum": "spectrum"
},
"locked": {
"lastModified": 1753388547,
"narHash": "sha256-zbjlS9sa2BbtE80YA9C9DMXwCADba3NjUROw/7Rpt7Y=",
"lastModified": 1715787097,
"narHash": "sha256-TPp2j0ttvBvkk4oXidvo8Y071zEab0BtcNsC3ZEkluI=",
"owner": "astro",
"repo": "microvm.nix",
"rev": "9694139d7c761e857ac9d025f9110a92cd8f7686",
"rev": "fa673bf8656fe6f28253b83971a36999bc9995d2",
"type": "github"
},
"original": {
@ -283,6 +457,27 @@
"type": "github"
}
},
"nix-darwin": {
"inputs": {
"nixpkgs": [
"nixvim",
"nixpkgs"
]
},
"locked": {
"lastModified": 1715901937,
"narHash": "sha256-eMyvWP56ZOdraC2IOvZo0/RTDcrrsqJ0oJWDC76JTak=",
"owner": "lnl7",
"repo": "nix-darwin",
"rev": "ffc01182f90118119930bdfc528c1ee9a39ecef8",
"type": "github"
},
"original": {
"owner": "lnl7",
"repo": "nix-darwin",
"type": "github"
}
},
"nix-github-actions": {
"inputs": {
"nixpkgs": [
@ -291,11 +486,11 @@
]
},
"locked": {
"lastModified": 1729697500,
"narHash": "sha256-VFTWrbzDlZyFHHb1AlKRiD/qqCJIripXKiCSFS8fAOY=",
"lastModified": 1690328911,
"narHash": "sha256-fxtExYk+aGf2YbjeWQ8JY9/n9dwuEt+ma1eUFzF8Jeo=",
"owner": "zhaofengli",
"repo": "nix-github-actions",
"rev": "e418aeb728b6aa5ca8c5c71974e7159c2df1d8cf",
"rev": "96df4a39c52f53cb7098b923224d8ce941b64747",
"type": "github"
},
"original": {
@ -307,11 +502,11 @@
},
"nixos-hardware": {
"locked": {
"lastModified": 1754564048,
"narHash": "sha256-dz303vGuzWjzOPOaYkS9xSW+B93PSAJxvBd6CambXVA=",
"lastModified": 1716034089,
"narHash": "sha256-QBfab6V4TeQ6Y4NiXVrEATdQuhCNFNaXt/L1K/Zw+zc=",
"owner": "NixOS",
"repo": "nixos-hardware",
"rev": "26ed7a0d4b8741fe1ef1ee6fa64453ca056ce113",
"rev": "b55712de78725c8fcde422ee0a0fe682046e73c3",
"type": "github"
},
"original": {
@ -323,27 +518,43 @@
},
"nixpkgs": {
"locked": {
"lastModified": 1754689972,
"narHash": "sha256-eogqv6FqZXHgqrbZzHnq43GalnRbLTkbBbFtEfm1RSc=",
"lastModified": 1716061101,
"narHash": "sha256-H0eCta7ahEgloGIwE/ihkyGstOGu+kQwAiHvwVoXaA0=",
"owner": "NixOS",
"repo": "nixpkgs",
"rev": "fc756aa6f5d3e2e5666efcf865d190701fef150a",
"rev": "e7cc61784ddf51c81487637b3031a6dd2d6673a2",
"type": "github"
},
"original": {
"owner": "NixOS",
"ref": "nixos-25.05",
"ref": "nixos-23.11",
"repo": "nixpkgs",
"type": "github"
}
},
"nixpkgs-stable": {
"locked": {
"lastModified": 1710695816,
"narHash": "sha256-3Eh7fhEID17pv9ZxrPwCLfqXnYP006RKzSs0JptsN84=",
"owner": "NixOS",
"repo": "nixpkgs",
"rev": "614b4613980a522ba49f0d194531beddbb7220d3",
"type": "github"
},
"original": {
"owner": "NixOS",
"ref": "nixos-23.11",
"repo": "nixpkgs",
"type": "github"
}
},
"nixpkgs-unstable": {
"locked": {
"lastModified": 1754725699,
"narHash": "sha256-iAcj9T/Y+3DBy2J0N+yF9XQQQ8IEb5swLFzs23CdP88=",
"lastModified": 1715961556,
"narHash": "sha256-+NpbZRCRisUHKQJZF3CT+xn14ZZQO+KjxIIanH3Pvn4=",
"owner": "nixos",
"repo": "nixpkgs",
"rev": "85dbfc7aaf52ecb755f87e577ddbe6dbbdbc1054",
"rev": "4a6b83b05df1a8bd7d99095ec4b4d271f2956b64",
"type": "github"
},
"original": {
@ -353,24 +564,84 @@
"type": "github"
}
},
"nixvim": {
"inputs": {
"devshell": "devshell",
"flake-compat": "flake-compat_2",
"flake-parts": "flake-parts_2",
"flake-root": "flake-root",
"home-manager": "home-manager_3",
"nix-darwin": "nix-darwin",
"nixpkgs": [
"nixpkgs-unstable"
],
"pre-commit-hooks": "pre-commit-hooks",
"treefmt-nix": "treefmt-nix"
},
"locked": {
"lastModified": 1716125991,
"narHash": "sha256-PmB9vmp383foiVi64RawbnkC+6SiYiWUjdzw2xgl3eM=",
"owner": "nix-community",
"repo": "nixvim",
"rev": "88ade1dfaa017499326103a078c66dd5d4d0606e",
"type": "github"
},
"original": {
"owner": "nix-community",
"repo": "nixvim",
"type": "github"
}
},
"pre-commit-hooks": {
"inputs": {
"flake-compat": "flake-compat_3",
"gitignore": "gitignore_2",
"nixpkgs": [
"nixvim",
"nixpkgs"
],
"nixpkgs-stable": [
"nixvim",
"nixpkgs"
]
},
"locked": {
"lastModified": 1715870890,
"narHash": "sha256-nacSOeXtUEM77Gn0G4bTdEOeFIrkCBXiyyFZtdGwuH0=",
"owner": "cachix",
"repo": "pre-commit-hooks.nix",
"rev": "fa606cccd7b0ccebe2880051208e4a0f61bfc8c1",
"type": "github"
},
"original": {
"owner": "cachix",
"repo": "pre-commit-hooks.nix",
"type": "github"
}
},
"pre-commit-hooks-nix": {
"inputs": {
"flake-compat": [
"lanzaboote",
"flake-compat"
],
"flake-utils": [
"lanzaboote",
"flake-utils"
],
"gitignore": "gitignore",
"nixpkgs": [
"lanzaboote",
"nixpkgs"
]
],
"nixpkgs-stable": "nixpkgs-stable"
},
"locked": {
"lastModified": 1750779888,
"narHash": "sha256-wibppH3g/E2lxU43ZQHC5yA/7kIKLGxVEnsnVK1BtRg=",
"lastModified": 1710923068,
"narHash": "sha256-6hOpUiuxuwpXXc/xfJsBUJeqqgGI+JMJuLo45aG3cKc=",
"owner": "cachix",
"repo": "pre-commit-hooks.nix",
"rev": "16ec914f6fb6f599ce988427d9d94efddf25fe6d",
"rev": "e611897ddfdde3ed3eaac4758635d7177ff78673",
"type": "github"
},
"original": {
@ -390,22 +661,27 @@
"microvm": "microvm",
"nixos-hardware": "nixos-hardware",
"nixpkgs": "nixpkgs",
"nixpkgs-unstable": "nixpkgs-unstable"
"nixpkgs-unstable": "nixpkgs-unstable",
"nixvim": "nixvim"
}
},
"rust-overlay": {
"inputs": {
"flake-utils": [
"lanzaboote",
"flake-utils"
],
"nixpkgs": [
"lanzaboote",
"nixpkgs"
]
},
"locked": {
"lastModified": 1754189623,
"narHash": "sha256-fstu5eb30UYwsxow0aQqkzxNxGn80UZjyehQVNVHuBk=",
"lastModified": 1711246447,
"narHash": "sha256-g9TOluObcOEKewFo2fR4cn51Y/jSKhRRo4QZckHLop0=",
"owner": "oxalica",
"repo": "rust-overlay",
"rev": "c582ff7f0d8a7ea689ae836dfb1773f1814f472a",
"rev": "dcc802a6ec4e9cc6a1c8c393327f0c42666f22e4",
"type": "github"
},
"original": {
@ -417,11 +693,11 @@
"spectrum": {
"flake": false,
"locked": {
"lastModified": 1751265943,
"narHash": "sha256-XoHSo6GEElzRUOYAEg/jlh5c8TDsyDESFIux3nU/NMc=",
"lastModified": 1708358594,
"narHash": "sha256-e71YOotu2FYA67HoC/voJDTFsiPpZNRwmiQb4f94OxQ=",
"ref": "refs/heads/main",
"rev": "37c8663fab86fdb202fece339ef7ac7177ffc201",
"revCount": 904,
"rev": "6d0e73864d28794cdbd26ab7b37259ab0e1e044c",
"revCount": 614,
"type": "git",
"url": "https://spectrum-os.org/git/spectrum"
},
@ -459,6 +735,57 @@
"repo": "default",
"type": "github"
}
},
"systems_3": {
"locked": {
"lastModified": 1681028828,
"narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
"owner": "nix-systems",
"repo": "default",
"rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
"type": "github"
},
"original": {
"owner": "nix-systems",
"repo": "default",
"type": "github"
}
},
"systems_4": {
"locked": {
"lastModified": 1681028828,
"narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
"owner": "nix-systems",
"repo": "default",
"rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
"type": "github"
},
"original": {
"owner": "nix-systems",
"repo": "default",
"type": "github"
}
},
"treefmt-nix": {
"inputs": {
"nixpkgs": [
"nixvim",
"nixpkgs"
]
},
"locked": {
"lastModified": 1715940852,
"narHash": "sha256-wJqHMg/K6X3JGAE9YLM0LsuKrKb4XiBeVaoeMNlReZg=",
"owner": "numtide",
"repo": "treefmt-nix",
"rev": "2fba33a182602b9d49f0b2440513e5ee091d838b",
"type": "github"
},
"original": {
"owner": "numtide",
"repo": "treefmt-nix",
"type": "github"
}
}
},
"root": "root",

54
flake.nix
View File

@ -12,7 +12,7 @@
inputs = # All flake references used to build my NixOS setup. These are dependencies.
{
nixpkgs-unstable.url = "github:nixos/nixpkgs/nixos-unstable"; # Nix Packages
nixpkgs.url = "github:NixOS/nixpkgs/nixos-25.05";
nixpkgs.url = "github:NixOS/nixpkgs/nixos-23.11";
nixos-hardware.url = "github:NixOS/nixos-hardware/master";
microvm = {
@ -23,7 +23,7 @@
impermanence.url = "github:nix-community/impermanence";
home-manager = { # User Package Management
url = "github:nix-community/home-manager/release-25.05";
url = "github:nix-community/home-manager/release-23.11";
inputs.nixpkgs.follows = "nixpkgs";
};
@ -38,37 +38,37 @@
};
jovian-nixos = {
url = "github:Jovian-Experiments/Jovian-NixOS";
inputs.nixpkgs.follows = "nixpkgs-unstable";
url = "github:Jovian-Experiments/Jovian-NixOS";
inputs.nixpkgs.follows = "nixpkgs-unstable";
};
lanzaboote = {
url = "github:nix-community/lanzaboote/master";
inputs.nixpkgs.follows = "nixpkgs";
};
url = "github:nix-community/lanzaboote/master";
inputs.nixpkgs.follows = "nixpkgs";
};
nixvim = {
url = "github:nix-community/nixvim";
inputs.nixpkgs.follows = "nixpkgs-unstable";
};
};
outputs = inputs @ { self, nixpkgs, nixpkgs-unstable, nixos-hardware, home-manager, home-manager-unstable, agenix, jovian-nixos, microvm, impermanence, lanzaboote, ... }: # Function that tells my flake which to use and what do what to do with the dependencies.
rec {
nixosConfigurations = ( # NixOS configurations
import ./hosts { # Imports ./hosts/default.nix
inherit (nixpkgs) lib;
inherit inputs nixpkgs nixpkgs-unstable nixos-hardware home-manager home-manager-unstable agenix jovian-nixos microvm impermanence lanzaboote; # Also inherit home-manager so it does not need to be defined here.
nix.allowedUsers = [ "@wheel" ];
security.sudo.execWheelOnly = true;
}
);
hydraJobs = {
"steamdeck" = nixosConfigurations.steamdeck.config.system.build.toplevel;
"hades" = nixosConfigurations.hades.config.system.build.toplevel;
"nasbak" = nixosConfigurations.nasbak.config.system.build.toplevel;
"jupiter" = nixosConfigurations.jupiter.config.system.build.toplevel;
"lifebook" = nixosConfigurations.lifebook.config.system.build.toplevel;
"kabtop" = nixosConfigurations.kabtop.config.system.build.toplevel;
"dmz" = nixosConfigurations.dmz.config.system.build.toplevel;
};
outputs = inputs @ { self, nixpkgs, nixpkgs-unstable, nixos-hardware, home-manager, home-manager-unstable, agenix, jovian-nixos, microvm, impermanence, lanzaboote, nixvim, ... }: # Function that tells my flake which to use and what do what to do with the dependencies.
let # Variables that can be used in the config files
user = "kabbone";
userdmz = "diablo";
userserver = "mephisto";
location = "$HOME/.setup";
in # Use above variables in ...
{
nixosConfigurations = ( # NixOS configurations
import ./hosts { # Imports ./hosts/default.nix
inherit (nixpkgs) lib;
inherit inputs nixpkgs nixpkgs-unstable nixos-hardware home-manager home-manager-unstable user userdmz userserver location agenix jovian-nixos microvm impermanence lanzaboote nixvim; # Also inherit home-manager so it does not need to be defined here.
nix.allowedUsers = [ "@wheel" ];
security.sudo.execWheelOnly = true;
}
);
};
}

67
hosts/configuration_desktop.nix
View File

@ -10,7 +10,7 @@
# └─ default.nix
#
{ config, lib, pkgs, pkgs-stable, inputs, user, location, agenix, ... }:
{ config, lib, pkgs, inputs, user, location, agenix, ... }:
{
imports = # Import window or display manager.
@ -58,12 +58,12 @@
# };
};
#sound = { # ALSA sound enable
## #enable = true;
# mediaKeys = { # Keyboard Media Keys (for minimal desktop) enable = true;
# enable = true;
# };
#};
sound = { # ALSA sound enable
#enable = true;
mediaKeys = { # Keyboard Media Keys (for minimal desktop) enable = true;
enable = true;
};
};
fonts.packages = with pkgs; [ # Fonts
carlito # NixOS
@ -74,6 +74,11 @@
corefonts # MS
intel-one-mono
cascadia-code
(nerdfonts.override { # Nerdfont Icons override
fonts = [
"FiraCode"
];
})
];
environment = {
@ -83,14 +88,13 @@
VISUAL = "nvim";
BROWSER = "firefox";
};
systemPackages = (with pkgs; [ # Default packages install system-wide
systemPackages = with pkgs; [ # Default packages install system-wide
vim
git
killall
pciutils
usbutils
wget
file
powertop
cpufrequtils
lm_sensors
@ -104,24 +108,15 @@
age-plugin-yubikey
pwgen
cryptsetup
python311Packages.powerline
powerline
powerline-fonts
powerline-symbols
tree
direnv
linuxPackages_latest.cpupower
linuxPackages_latest.turbostat
btop
sbctl
ausweisapp
e2fsprogs
])
++
(with pkgs-stable; [
orca-slicer
]);
];
};
services = {
@ -136,18 +131,28 @@
};
openssh = { # SSH: secure shell (remote connection to shell of server)
enable = true; # local: $ ssh <user>@<ip>
settings = {
PasswordAuthentication = false;
PermitRootLogin = "no";
};
# public:
# - port forward 22 TCP to server
# - in case you want to use the domain name insted of the ip:
# - for me, via cloudflare, create an A record with name "ssh" to the correct ip without proxy
# - connect via ssh <user>@<ip or ssh.domain>
# generating a key:
# - $ ssh-keygen | ssh-copy-id <ip/domain> | ssh-add
# - if ssh-add does not work: $ eval `ssh-agent -s`
# allowSFTP = true; # SFTP: secure file transfer protocol (send file to server)
# connect: $ sftp <user>@<ip/domain>
# commands:
# - lpwd & pwd = print (local) parent working directory
# - put/get <filename> = send or receive file
# extraConfig = ''
# HostKeyAlgorithms +ssh-rsa
# ''; # Temporary extra config so ssh will work in guacamole
settings.PasswordAuthentication = false;
};
pcscd.enable = true;
yubikey-agent.enable = true;
udev.packages = [ pkgs.yubikey-personalization pkgs.nitrokey-udev-rules ];
flatpak.enable = true; # download flatpak file from website - sudo flatpak install <path> - reboot if not showing up
#flatpak.enable = true; # download flatpak file from website - sudo flatpak install <path> - reboot if not showing up
# sudo flatpak uninstall --delete-data <app-id> (> flatpak list --app) - flatpak uninstall --unused
# List:
# com.obsproject.Studio
@ -157,16 +162,6 @@
fwupd.enable = true;
};
programs = { # No xbacklight, this is the alterantive
zsh.enable = true;
dconf.enable = true;
ssh = {
startAgent = true;
agentTimeout = "1h";
};
};
#xdg.portal = { # Required for flatpak
# enable = true;
# extraPortals = [ pkgs.xdg-desktop-portal-gtk ];
@ -190,7 +185,7 @@
system = { # NixOS settings
autoUpgrade = { # Allow auto update
enable = false;
enable = true;
flake = "git+https://git.kabtop.de/Kabbone/nixos-config";
randomizedDelaySec = "5m";
allowReboot = true;

32
hosts/configuration_server.nix
View File

@ -13,6 +13,8 @@
{ config, lib, pkgs, inputs, user, location, agenix, ... }:
{
imports = # Import window or display manager.
[
#../modules/editors/nvim # ! Comment this out on first install !
@ -47,22 +49,24 @@
keyMap = "us"; # or us/azerty/etc
};
security = {
rtkit.enable = true;
pki.certificateFiles = [
security.rtkit.enable = true;
security.pki.certificateFiles = [
./rootCA.pem
];
};
];
fonts.packages = with pkgs; [ # Fonts
carlito # NixOS
vegur # NixOS
source-code-pro
cascadia-code
font-awesome # Icons
hack-font
corefonts # MS
intel-one-mono
cascadia-code
(nerdfonts.override { # Nerdfont Icons override
fonts = [
"FiraCode"
];
})
];
environment = {
@ -70,7 +74,6 @@
TERMINAL = "alacritty";
EDITOR = "nvim";
VISUAL = "nvim";
BROWSER = "firefox";
};
systemPackages = with pkgs; [ # Default packages install system-wide
vim
@ -87,15 +90,13 @@
agenix.packages.x86_64-linux.default
ffmpeg
smartmontools
cryptsetup
python311Packages.powerline
powerline
powerline-fonts
powerline-symbols
tree
direnv
linuxPackages_latest.cpupower
btop
htop
direnv
];
};
@ -114,10 +115,6 @@
# sudo flatpak uninstall --delete-data <app-id> (> flatpak list --app) - flatpak uninstall --unused
};
programs = {
zsh.enable = true;
};
nix = { # Nix Package Manager settings
settings ={
auto-optimise-store = true; # Optimise syslinks
@ -135,9 +132,6 @@
'';
};
nixpkgs.config.allowUnfree = true; # Allow proprietary software.
nixpkgs.config.permittedInsecurePackages = [
"olm-3.2.16"
];
system = { # NixOS settings
autoUpgrade = { # Allow auto update

120
hosts/default.nix
View File

@ -11,14 +11,9 @@
# └─ ./home.nix
#
{ lib, inputs, nixpkgs, nixpkgs-unstable, nixos-hardware, home-manager, home-manager-unstable, agenix, jovian-nixos, microvm, impermanence, lanzaboote, ... }:
{ lib, inputs, nixpkgs, nixpkgs-unstable, nixos-hardware, home-manager, home-manager-unstable, user, userdmz, userserver, location, agenix, jovian-nixos, microvm, impermanence, lanzaboote, nixvim, ... }:
let
user = "kabbone";
userdmz = "diablo";
userserver = "mephisto";
location = "$HOME/.setup";
system = "x86_64-linux"; # System architecture
pkgs = import nixpkgs {
@ -26,31 +21,21 @@ let
config.allowUnfree = true; # Allow proprietary software
};
pkgs-unstable = import nixpkgs-unstable {
inherit system;
config.allowUnfree = true; # Allow proprietary software
};
pkgs-stable = import nixpkgs {
inherit system;
config.allowUnfree = true; # Allow proprietary software
};
lib = nixpkgs.lib;
users.defaultShell = "pkgs.zsh";
in
{
hades = lib.nixosSystem { # Desktop profile
desktop = lib.nixosSystem { # Desktop profile
inherit system;
specialArgs = { inherit inputs pkgs-stable user location nixos-hardware agenix microvm nixpkgs lanzaboote; };
specialArgs = { inherit inputs user location nixos-hardware agenix microvm nixpkgs lanzaboote nixvim; };
modules = [
agenix.nixosModules.default
microvm.nixosModules.host
lanzaboote.nixosModules.lanzaboote
#nixvim.nixosModules.nixvim
./desktop
./configuration_desktop.nix
../modules/hardware/hydraCache.nix
../modules/hardware/remoteBuilder.nix
nixos-hardware.nixosModules.common-cpu-amd
nixos-hardware.nixosModules.common-gpu-amd
@ -68,16 +53,16 @@ in
];
};
lifebook = lib.nixosSystem { # Laptop profile
laptop = lib.nixosSystem { # Laptop profile
inherit system;
specialArgs = { inherit inputs pkgs-stable user location nixos-hardware agenix lanzaboote; };
specialArgs = { inherit inputs user location nixos-hardware agenix; };
modules = [
agenix.nixosModules.default
lanzaboote.nixosModules.lanzaboote
./lifebook
./laptop
./configuration_desktop.nix
../modules/hardware/hydraCache.nix
../modules/hardware/remoteClient.nix
nixos-hardware.nixosModules.common-cpu-intel
nixos-hardware.nixosModules.common-gpu-intel
nixos-hardware.nixosModules.common-pc-ssd
home-manager.nixosModules.home-manager {
@ -85,29 +70,7 @@ in
home-manager.useUserPackages = true;
home-manager.extraSpecialArgs = { inherit user; };
home-manager.users.${user} = {
imports = [(import ./home.nix)] ++ [(import ./lifebook/home.nix)];
};
}
];
};
nbf5 = lib.nixosSystem { # Laptop profile
inherit system;
specialArgs = { inherit inputs pkgs-stable user location nixos-hardware agenix; };
modules = [
agenix.nixosModules.default
./nbf5
./configuration_server.nix
../modules/hardware/hydraCache.nix
nixos-hardware.nixosModules.common-cpu-intel
nixos-hardware.nixosModules.common-pc-ssd
home-manager.nixosModules.home-manager {
home-manager.useGlobalPkgs = true;
home-manager.useUserPackages = true;
home-manager.extraSpecialArgs = { inherit user; };
home-manager.users.${user} = {
imports = [(import ./home_server.nix)] ++ [(import ./nbf5/home.nix)];
imports = [(import ./home.nix)] ++ [(import ./laptop/home.nix)];
};
}
];
@ -115,14 +78,17 @@ in
steamdeck = nixpkgs-unstable.lib.nixosSystem { # steamdeck profile
inherit system;
specialArgs = { inherit inputs pkgs-stable user location nixos-hardware agenix jovian-nixos lanzaboote; };
specialArgs = { inherit inputs user location nixos-hardware agenix jovian-nixos lanzaboote; };
modules = [
agenix.nixosModules.default
jovian-nixos.nixosModules.default
lanzaboote.nixosModules.lanzaboote
./steamdeck
./configuration_desktop.nix
../modules/hardware/hydraCache.nix
../modules/hardware/remoteClient.nix
nixos-hardware.nixosModules.common-cpu-amd
nixos-hardware.nixosModules.common-gpu-amd
nixos-hardware.nixosModules.common-pc-ssd
home-manager-unstable.nixosModules.home-manager {
home-manager.useGlobalPkgs = true;
@ -143,7 +109,6 @@ in
microvm.nixosModules.host
./server
./configuration_server.nix
../modules/hardware/hydraCache.nix
nixos-hardware.nixosModules.common-cpu-amd
nixos-hardware.nixosModules.common-pc-ssd
@ -166,7 +131,6 @@ in
microvm.nixosModules.host
./kabtop
./configuration_server.nix
../modules/hardware/hydraCache.nix
nixos-hardware.nixosModules.common-cpu-amd
nixos-hardware.nixosModules.common-pc-ssd
@ -187,8 +151,8 @@ in
modules = [
agenix.nixosModules.default
./nasbackup
./configuration_server.nix
../modules/hardware/hydraCache.nix
./configuration_desktop.nix
../modules/hardware/remoteClient.nix
nixos-hardware.nixosModules.common-cpu-intel
nixos-hardware.nixosModules.common-pc-ssd
@ -209,8 +173,8 @@ in
modules = [
agenix.nixosModules.default
./jupiter
./configuration_server.nix
../modules/hardware/hydraCache.nix
./configuration_desktop.nix
../modules/hardware/remoteClient.nix
nixos-hardware.nixosModules.common-cpu-intel
nixos-hardware.nixosModules.common-pc-ssd
@ -225,51 +189,6 @@ in
];
};
kabtopci = lib.nixosSystem { # Desktop profile
inherit system;
specialArgs = { inherit inputs user location nixos-hardware agenix nixpkgs impermanence; };
modules = [
agenix.nixosModules.default
microvm.nixosModules.host
./kabtopci
./configuration_server.nix
../modules/hardware/hydraCache.nix
nixos-hardware.nixosModules.common-pc-ssd
home-manager.nixosModules.home-manager {
home-manager.useGlobalPkgs = true;
home-manager.useUserPackages = true;
home-manager.extraSpecialArgs = { inherit user; };
home-manager.users.${user} = {
imports = [(import ./home_server.nix)] ++ [(import ./kabtopci/home.nix)];
};
}
];
};
kubemaster-1 = lib.nixosSystem { # Desktop profile
inherit system;
specialArgs = { inherit inputs user location nixos-hardware agenix nixpkgs impermanence; };
modules = [
agenix.nixosModules.default
microvm.nixosModules.host
./kubemaster-1
./configuration_server.nix
../modules/hardware/hydraCache.nix
nixos-hardware.nixosModules.common-cpu-intel
nixos-hardware.nixosModules.common-pc-ssd
home-manager.nixosModules.home-manager {
home-manager.useGlobalPkgs = true;
home-manager.useUserPackages = true;
home-manager.extraSpecialArgs = { inherit user; };
home-manager.users.${user} = {
imports = [(import ./home_server.nix)] ++ [(import ./kubemaster-1/home.nix)];
};
}
];
};
dmz = lib.nixosSystem { # Desktop profile
inherit system;
specialArgs = { inherit inputs user location nixos-hardware agenix nixpkgs impermanence; };
@ -278,7 +197,6 @@ in
microvm.nixosModules.host
./dmz
./configuration_server.nix
../modules/hardware/hydraCache.nix
nixos-hardware.nixosModules.common-pc-ssd
home-manager.nixosModules.home-manager {

46
hosts/desktop/default.nix
View File

@ -17,7 +17,7 @@
# └─ default.nix
#
{ config, nixpkgs, pkgs, user, lib, ... }:
{ config, nixpkgs, pkgs, user, lib, nixvim, ... }:
{
imports = # For now, if applying to other system, swap files
@ -53,24 +53,41 @@
# nitrokey.enable = true;
# };
environment = {
systemPackages = with pkgs; [
linux-firmware
];
# environment = {
# systemPackages = with pkgs; [
## simple-scan
## intel-media-driver
## alacritty
# ];
# };
programs = { # No xbacklight, this is the alterantive
zsh.enable = true;
dconf.enable = true;
ssh.startAgent = false;
gnupg.agent = {
enable = true;
enableSSHSupport = true;
pinentryFlavor = "curses";
};
};
services = {
#auto-cpufreq.enable = true;
blueman.enable = true;
avahi = { # Needed to find wireless printer
printing = { # Printing and drivers for TS5300
enable = true;
nssmdns4 = true;
publish = { # Needed for detecting the scanner
enable = true;
addresses = true;
userServices = true;
};
drivers = [ pkgs.gutenprint ];
};
#avahi = { # Needed to find wireless printer
# enable = true;
# nssmdns = true;
# publish = { # Needed for detecting the scanner
# enable = true;
# addresses = true;
# userServices = true;
# };
#};
hardware.openrgb = {
enable = true;
motherboard = "amd";
@ -78,4 +95,9 @@
};
#temporary bluetooth fix
# systemd.tmpfiles.rules = [
# "d /var/lib/bluetooth 700 root root - -"
# ];
# systemd.targets."bluetooth".after = ["systemd-tmpfiles-setup.service"];
}

72
hosts/desktop/hardware-configuration.nix
View File

@ -19,7 +19,7 @@
boot.initrd.availableKernelModules = [ "xhci_pci" "ahci" "nvme" "usb_storage" "usbhid" "sd_mod" ];
boot.initrd.kernelModules = [ "vfio_pci" "vfio" "vfio_iommu_type1" ];
boot.kernelModules = [ "kvm-amd" "nct6775" ];
boot.kernelModules = [ "kvm-amd" ];
boot.extraModulePackages = [ ];
boot.tmp.useTmpfs = false;
boot.tmp.cleanOnBoot = true;
@ -34,7 +34,6 @@
};
services.btrbk = {
extraPackages = [ pkgs.lz4 pkgs.mbuffer ];
instances = {
hf = {
onCalendar = "hourly";
@ -57,40 +56,6 @@
};
};
};
bak = {
onCalendar = "daily";
settings = {
stream_buffer = "256m";
stream_compress = "lz4";
incremental = "yes";
snapshot_create = "no";
snapshot_dir = "@snapshots";
timestamp_format = "long";
snapshot_preserve_min = "all";
target_preserve_min = "no";
target_preserve = "2m 4w 3d";
ssh_identity = "/etc/btrbk/ssh/id_ed25519_btrbk_nas";
ssh_user = "btrbk";
volume = {
"/mnt/snapshots/root" = {
subvolume = {
"@home" = {};
};
target = "ssh://jupiter.home.opel-online.de:2220/mnt/snapshots/Mars/@snapshots/@hades";
};
};
};
};
};
};
systemd.timers = {
btrbk-bak = {
after = [ "network-online.target" ];
requires = [ "network-online.target" ];
};
};
@ -154,29 +119,24 @@
useDHCP = false; # Deprecated
hostName = "hades";
networkmanager = {
enable = true;
};
firewall = {
enable = true;
allowedUDPPorts = [ 24727 ];
allowedTCPPorts = [ 24727 ];
enable = false;
};
};
# systemd.network = {
# enable = true;
# networks = {
# "10-lan" = {
# matchConfig.Name = "eno1";
# ntp = [ "192.168.2.1" ];
# domains = [ "home.opel-online.de" ];
# networkConfig = {
# DHCP = "yes";
# IPv6AcceptRA = true;
# };
# };
# };
# };
systemd.network = {
enable = true;
networks = {
"10-lan" = {
matchConfig.Name = "enp34s0";
ntp = [ "192.168.2.1" ];
domains = [ "home.opel-online.de" ];
networkConfig = {
DHCP = "yes";
IPv6AcceptRA = true;
};
};
};
};
hardware.cpu.amd.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
#powerManagement.powertop.enable = true;

7
hosts/desktop/home.nix
View File

@ -31,11 +31,12 @@
streamlink
streamlink-twitch-gui-bin
element-desktop
#nheko
nheko
pulsemixer
#yubioath-flutter
nitrokey-app
kicad
yuzu-mainline
# Display
#light # xorg.xbacklight not supported. Other option is just use xrandr.
@ -46,6 +47,10 @@
];
};
programs = {
alacritty.settings.font.size = 11;
};
services = { # Applets
blueman-applet.enable = true; # Bluetooth
network-manager-applet.enable = true; # Network

5
hosts/dmz/default.nix
View File

@ -24,7 +24,8 @@
[(import ./hardware-configuration.nix)] ++ # Current system hardware config @ /etc/nixos/hardware-configuration.nix
[(import ../../modules/wm/virtualisation/docker.nix)] ++ # Docker
[(import ../../modules/wm/virtualisation/kvm-intel.nix)] ++ # Docker
(import ../../modules/services/dmz); # Server Services
(import ../../modules/services/dmz) ++ # Server Services
(import ../../modules/hardware); # Hardware devices
boot = { # Boot options
kernelPackages = pkgs.linuxPackages_latest;
@ -47,7 +48,7 @@
qemuGuest.enable = true;
avahi = { # Needed to find wireless printer
enable = true;
nssmdns4 = true;
nssmdns = true;
publish = { # Needed for detecting the scanner
enable = true;
addresses = true;

9
hosts/dmz/hardware-configuration.nix
View File

@ -81,16 +81,13 @@
enable = true;
networks = {
"10-lan" = {
matchConfig.Name = "ens18";
matchConfig.Name = "enp6s18";
ntp = [ "192.168.101.1" ];
#domains = [ "home.opel-online.de" ];
domains = [ "home.opel-online.de" ];
networkConfig = {
DHCP = "yes";
IPv6AcceptRA = true;
};
dns = [
"192.168.101.1"
];
};
};
};
@ -100,7 +97,7 @@
firewall = {
enable = true;
allowedUDPPorts = [ ];
allowedTCPPorts = [ 80 443 ];
allowedTCPPorts = [ ];
};
};

78
hosts/fuji/default.nix
View File

@ -1,78 +0,0 @@
#
# Specific system configuration settings for desktop
#
# flake.nix
# ├─ ./hosts
# │ └─ ./laptop
# │ ├─ default.nix *
# │ └─ hardware-configuration.nix
# └─ ./modules
# ├─ ./desktop
# │ └─ ./hyprland
# │ └─ hyprland.nix
# ├─ ./modules
# │ └─ ./programs
# │ └─ waybar.nix
# └─ ./hardware
# └─ default.nix
#
{ config, nixpkgs, pkgs, user, lib, ... }:
{
imports = # For now, if applying to other system, swap files
[(import ./hardware-configuration.nix)] ++ # Current system hardware config @ /etc/nixos/hardware-configuration.nix
[(import ../../modules/wm/sway/default.nix)] ++ # Window Manager
(import ../../modules/wm/virtualisation) ++ # libvirt + Docker
[(import ../../modules/wm/virtualisation/kvm-amd.nix)] ++ # kvm module options
(import ../../modules/hardware); # Hardware devices
boot = { # Boot options
kernelPackages = pkgs.linuxPackages_latest;
loader = { # EFI Boot
systemd-boot.enable = lib.mkForce false;
efi = {
canTouchEfiVariables = true;
efiSysMountPoint = "/boot";
};
timeout = 1; # Grub auto select time
};
lanzaboote = {
enable = true;
pkiBundle = "/etc/secureboot";
};
};
# hardware.sane = { # Used for scanning with Xsane
# enable = false;
# extraBackends = [ pkgs.sane-airscan ];
# };
# hardware = {
# nitrokey.enable = true;
# };
# environment = {
# systemPackages = with pkgs; [
## simple-scan
## intel-media-driver
## alacritty
# ];
# };
services = {
#auto-cpufreq.enable = true;
blueman.enable = true;
avahi = { # Needed to find wireless printer
enable = true;
nssmdns4 = true;
publish = { # Needed for detecting the scanner
enable = true;
addresses = true;
userServices = true;
};
};
};
}

138
hosts/fuji/hardware-configuration.nix
View File

@ -1,138 +0,0 @@
#
# Hardware settings for Teclast F5 10" Laptop
# NixOS @ sda2
#
# flake.nix
# └─ ./hosts
# └─ ./laptop
# └─ hardware-configuration.nix *
#
# Do not modify this file! It was generated by ‘nixos-generate-config’
# and may be overwritten by future invocations. Please make changes
# to /etc/nixos/configuration.nix instead.
{ config, lib, pkgs, modulesPath, ... }:
{
imports =
[ (modulesPath + "/installer/scan/not-detected.nix")] ++
[( import ../../modules/hardware/backup.nix )];
boot.initrd.availableKernelModules = [ "xhci_pci" "ahci" "nvme" "usb_storage" "usbhid" "sd_mod" ];
boot.initrd.kernelModules = [ "vfio_pci" "vfio" "vfio_iommu_type1" ];
boot.kernelModules = [ "kvm-intel" ];
boot.extraModulePackages = [ ];
boot.tmp.useTmpfs = false;
boot.tmp.cleanOnBoot = true;
zramSwap.enable = true;
services.btrfs.autoScrub = {
enable = true;
interval = "monthly";
fileSystems = [
"/"
];
};
services.btrbk = {
instances = {
hf = {
onCalendar = "hourly";
settings = {
incremental = "yes";
snapshot_create = "ondemand";
snapshot_dir = "@snapshots";
timestamp_format = "long";
snapshot_preserve = "2m 2w 5d 5h";
snapshot_preserve_min = "latest";
volume = {
"/mnt/snapshots/root" = {
snapshot_create = "always";
subvolume = {
"@home" = {};
};
};
};
};
};
};
};
fileSystems."/" =
{ device = "/dev/disk/by-id/nvme-ADATA_SX8200PNP_2J3320119186-part2";
fsType = "btrfs";
options = [ "compress=zstd,space_cache=v2,ssd,noatime,subvol=@,discard=async" ];
};
fileSystems."/home" =
{ device = "/dev/disk/by-id/nvme-ADATA_SX8200PNP_2J3320119186-part2";
fsType = "btrfs";
options = [ "compress=zstd,space_cache=v2,ssd,noatime,subvol=@home,discard=async" ];
};
fileSystems."/srv" =
{ device = "/dev/disk/by-id/nvme-ADATA_SX8200PNP_2J3320119186-part2";
fsType = "btrfs";
options = [ "compress=zstd,space_cache=v2,ssd,noatime,subvol=@srv,discard=async" ];
};
fileSystems."/nix" =
{ device = "/dev/disk/by-id/nvme-ADATA_SX8200PNP_2J3320119186-part2";
fsType = "btrfs";
options = [ "compress=zstd,space_cache=v2,ssd,noatime,subvol=@nix,discard=async" ];
};
fileSystems."/swap" =
{ device = "/dev/disk/by-id/nvme-ADATA_SX8200PNP_2J3320119186-part2";
fsType = "btrfs";
options = [ "compress=zstd,space_cache=v2,ssd,noatime,subvol=@swap,discard=async" ];
};
fileSystems."/mnt/snapshots/root" =
{ device = "/dev/disk/by-id/nvme-ADATA_SX8200PNP_2J3320119186-part2";
fsType = "btrfs";
options = [ "compress=zstd,space_cache=v2,ssd,noatime,subvolid=5,discard=async" ];
};
fileSystems."/boot" =
{ device = "/dev/disk/by-id/nvme-ADATA_SX8200PNP_2J3320119186-part1";
fsType = "vfat";
};
swapDevices = [ { device = "/swap/swapfile"; } ];
networking = {
useDHCP = false; # Deprecated
hostName = "fuji";
networkmanager = {
enable = false;
};
firewall = {
enable = true;
#allowedUDPPorts = [ 24727 ];
#allowedTCPPorts = [ 24727 ];
};
};
systemd.network = {
enable = true;
networks = {
"10-lan" = {
matchConfig.Name = "eno1";
ntp = [ "192.168.2.1" ];
networkConfig = {
DHCP = "yes";
IPv6AcceptRA = true;
};
};
};
};
hardware.cpu.intel.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
#powerManagement.powertop.enable = true;
powerManagement = {
scsiLinkPolicy = "med_power_with_dipm";
};
}

45
hosts/fuji/home.nix
View File

@ -1,45 +0,0 @@
#
# Home-manager configuration for laptop
#
# flake.nix
# ├─ ./hosts
# │ └─ ./laptop
# │ └─ home.nix *
# └─ ./modules
# └─ ./desktop
# └─ ./hyprland
# └─ hyprland.nix
#
{ pkgs, ... }:
{
imports =
[
#../../modules/wm/hyprland/home.nix # Window Manager
#../../modules/wm/kde/home.nix # Window Manager
../../modules/home.nix # Window Manager
];
home = { # Specific packages for laptop
packages = with pkgs; [
# Applications
#firefox
chromium
thunderbird
streamlink
streamlink-twitch-gui-bin
element-desktop
#nheko
pulsemixer
];
};
services = { # Applets
#blueman-applet.enable = true; # Bluetooth
network-manager-applet.enable = true; # Network
};
xsession.preferStatusNotifierItems = true;
}

35
hosts/home.nix
View File

@ -15,10 +15,10 @@
# └─ default.nix
#
{ config, lib, pkgs, user, pkgs-stable, ... }:
{ config, lib, pkgs, user, ... }:
{
imports =
imports = # Home Manager Modules
(import ../modules/editors) ++
(import ../modules/programs) ++
(import ../modules/programs/configs) ++
@ -52,6 +52,7 @@
# VideAudio
mpv # Media Player
youtube-dl
# Apps
galculator
@ -63,21 +64,20 @@
mtpfs
vimiv-qt
freecad
discord
# Fileanagement
kdePackages.ark
#okular # PDF viewer
#gnome.file-roller # Archive Manager
ark
pcmanfm # File Manager
rsync # Syncer $ rsync -r dir1/ dir2/
unzip # Zip files
unrar # Rar files
papirus-icon-theme
arc-theme
# General configuration
# Genel configuration
keepassxc
libreoffice
gimp
# Flatpak
prusa-slicer
@ -90,30 +90,25 @@
#ms-python.python
ms-vscode.cpptools
dracula-theme.theme-dracula
catppuccin.catppuccin-vsc
catppuccin.catppuccin-vsc-icons
];
})
sdkmanager
android-tools
];
file.".config/wall".source = ../modules/themes/wall.jpg;
file.".config/lockwall".source = ../modules/themes/lockwall.jpg;
# pointerCursor = { # This will set cursor systemwide so applications can not choose their own
# name = "Dracula-cursors";
# package = pkgs.dracula-theme;
# size = 16;
# gtk.enable = true;
# };
pointerCursor = { # This will set cursor systemwide so applications can not choose their own
name = "Dracula-cursors";
package = pkgs.dracula-theme;
size = 16;
gtk.enable = true;
};
stateVersion = "23.05";
};
programs = {
home-manager.enable = true;
alacritty = {
settings.font.size = 11;
};
};

4
hosts/jupiter/default.nix
View File

@ -53,7 +53,7 @@
gnupg.agent = {
enable = false;
enableSSHSupport = true;
pinentryPackage = pkgs.pinentry-curses;
pinentryFlavor = "curses";
};
};
@ -61,7 +61,7 @@
qemuGuest.enable = true;
avahi = { # Needed to find wireless printer
enable = true;
nssmdns4 = true;
nssmdns = true;
publish = { # Needed for detecting the scanner
enable = true;
addresses = true;

44
hosts/jupiter/hardware-configuration.nix
View File

@ -50,7 +50,6 @@
};
services.btrbk = {
extraPackages = [ pkgs.lz4 pkgs.mbuffer ];
instances = {
hf = {
onCalendar = "hourly";
@ -189,24 +188,35 @@
swapDevices = [ { device = "/swap/swapfile"; } ];
systemd.network = {
enable = true;
networks = {
"10-lan" = {
matchConfig.Name = "ens18";
ntp = [ "192.168.2.1" ];
#domains = [ "home.opel-online.de" ];
networkConfig = {
DHCP = "yes";
IPv6AcceptRA = true;
};
};
};
};
networking = {
hostName = "jupiter";
domain = "home.opel-online.de";
useDHCP = false; # For versatility sake, manually edit IP on nm-applet.
networkmanager = {
enable = false;
};
timeServers = [
"192.168.2.1"
];
interfaces = {
enp6s18 = {
useDHCP = true; # For versatility sake, manually edit IP on nm-applet.
# ipv4.addresses = [ {
# address = "45.142.114.153";
# prefixLength = 24;
# } ];
# ipv6.addresses = [ {
# address = "2a00:ccc1:101:19D::2";
# prefixLength = 64;
# } ];
# };
};
};
# defaultGateway = "45.142.114.1";
defaultGateway6 = {
address = "fe80::1";
interface = "enp6s18";
};
# nameservers = [ "9.9.9.9" "2620:fe::fe" ];
#firewall = {
# enable = false;
# #allowedUDPPorts = [ 53 67 ];
@ -218,7 +228,7 @@
powerManagement = {
cpuFreqGovernor = lib.mkDefault "powersave";
powertop.enable = true;
#scsiLinkPolicy = "med_power_with_dipm";
scsiLinkPolicy = "med_power_with_dipm";
powerUpCommands = ''
${pkgs.hdparm}/sbin/hdparm -S 150 /dev/disk/by-uuid/57e6446d-faca-4b67-9063-e8d9afb80088
'';

23
hosts/kabtop/default.nix
View File

@ -24,7 +24,8 @@
[(import ./hardware-configuration.nix)] ++ # Current system hardware config @ /etc/nixos/hardware-configuration.nix
[(import ../../modules/wm/virtualisation/docker.nix)] ++ # Docker
[(import ../../modules/wm/virtualisation/kvm-amd.nix)] ++ # kvm module options
(import ../../modules/services/server); # Server Services
(import ../../modules/services/server) ++ # Server Services
(import ../../modules/hardware); # Hardware devices
boot = { # Boot options
kernelPackages = pkgs.linuxPackages_latest;
@ -61,22 +62,22 @@
gnupg.agent = {
enable = true;
enableSSHSupport = true;
pinentryPackage = pkgs.pinentry-curses;
pinentryFlavor = "curses";
};
};
services = {
#auto-cpufreq.enable = true;
qemuGuest.enable = true;
#avahi = { # Needed to find wireless printer
# enable = true;
# nssmdns = true;
# publish = { # Needed for detecting the scanner
# enable = true;
# addresses = true;
# userServices = true;
# };
#};
avahi = { # Needed to find wireless printer
enable = true;
nssmdns = true;
publish = { # Needed for detecting the scanner
enable = true;
addresses = true;
userServices = true;
};
};
fail2ban = {
enable = true;
maxretry = 5;

45
hosts/kabtop/hardware-configuration.nix
View File

@ -52,7 +52,6 @@
subvolume = {
"@" = {};
"@home" = {};
"@var" = {};
};
};
};
@ -114,36 +113,32 @@
networkmanager = {
enable = false;
};
interfaces = {
ens18 = {
useDHCP = false; # For versatility sake, manually edit IP on nm-applet.
ipv4.addresses = [ {
address = "37.44.215.182";
prefixLength = 24;
} ];
ipv6.addresses = [ {
address = "2a13:7e80:0:ef::2";
prefixLength = 64;
} ];
};
};
defaultGateway = "37.44.215.1";
defaultGateway6 = {
address = "fe80::1";
interface = "ens18";
};
nameservers = [ "9.9.9.9" "2620:fe::fe" ];
firewall = {
enable = true;
allowedUDPPorts = [ ];
allowedTCPPorts = [ 80 443 ];
};
};
systemd.network = {
enable = true;
networks = {
"10-lan" = {
matchConfig.Name = "ens18";
address = [
"37.44.215.182/24"
"2a13:7e80:0:ef::2/64"
];
routes = [
{ Gateway = "37.44.215.1"; }
{ Gateway = "fe80::1"; }
];
dns = [
"9.9.9.9"
"2620:fe::fe"
];
};
};
};
hardware.cpu.amd.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
}

45
hosts/kabtopci/default.nix
View File

@ -1,45 +0,0 @@
#
# Specific system configuration settings for desktop
#
# flake.nix
# ├─ ./hosts
# │ └─ ./laptop
# │ ├─ default.nix *
# │ └─ hardware-configuration.nix
# └─ ./modules
# ├─ ./desktop
# │ └─ ./hyprland
# │ └─ hyprland.nix
# ├─ ./modules
# │ └─ ./programs
# │ └─ waybar.nix
# └─ ./hardware
# └─ default.nix
#
{ config, pkgs, user, agenix, impermanence, ... }:
{
imports = # For now, if applying to other system, swap files
[(import ./hardware-configuration.nix)] ++ # Current system hardware config @ /etc/nixos/hardware-configuration.nix
[(import ../../modules/wm/virtualisation/docker.nix)] ++ # Docker
[(import ../../modules/wm/virtualisation/kvm-amd.nix)] ++ # Docker
(import ../../modules/services/kabtopci); # Server Services
boot = { # Boot options
kernelPackages = pkgs.linuxPackages_latest;
loader = { # EFI Boot
grub = {
enable = true;
device = "/dev/vda";
};
timeout = 1; # Grub auto select time
};
};
programs = { # No xbacklight, this is the alterantive
zsh.enable = true;
};
}

108
hosts/kabtopci/hardware-configuration.nix
View File

@ -1,108 +0,0 @@
#
# Hardware settings for Teclast F5 10" Laptop
# NixOS @ sda2
#
# flake.nix
# └─ ./hosts
# └─ ./laptop
# └─ hardware-configuration.nix *
#
# Do not modify this file! It was generated by ‘nixos-generate-config’
# and may be overwritten by future invocations. Please make changes
# to /etc/nixos/configuration.nix instead.
{ config, lib, pkgs, modulesPath, ... }:
{
imports =
[ (modulesPath + "/installer/scan/not-detected.nix")];
boot.initrd.availableKernelModules = [ "ata_piix" "virtio_pci" "virtio_scsi" "xhci_pci" "sr_mod" "virtio_blk" ];
boot.initrd.kernelModules = [ "vfio_pci" "vfio" "vfio_iommu_type1" ];
boot.kernelModules = [ ];
boot.extraModulePackages = [ ];
boot.tmp.useTmpfs = false;
boot.tmp.cleanOnBoot = true;
zramSwap.enable = true;
services.btrfs.autoScrub = {
enable = true;
interval = "monthly";
fileSystems = [
"/"
];
};
fileSystems."/" =
{ device = "/dev/disk/by-label/NIXROOT";
fsType = "btrfs";
options = [ "compress=zstd,space_cache=v2,ssd,noatime,subvol=@,discard=async" ];
};
fileSystems."/home" =
{ device = "/dev/disk/by-label/NIXROOT";
fsType = "btrfs";
options = [ "compress=zstd,space_cache=v2,ssd,noatime,subvol=@home,discard=async" ];
};
fileSystems."/srv" =
{ device = "/dev/disk/by-label/NIXROOT";
fsType = "btrfs";
options = [ "compress=zstd,space_cache=v2,ssd,noatime,subvol=@srv,discard=async" ];
};
fileSystems."/var" =
{ device = "/dev/disk/by-label/NIXROOT";
fsType = "btrfs";
options = [ "space_cache=v2,ssd,noatime,subvol=@var,discard=async" ];
};
fileSystems."/nix" =
{ device = "/dev/disk/by-label/NIXROOT";
fsType = "btrfs";
options = [ "compress=zstd:9,space_cache=v2,ssd,noatime,subvol=@nix,discard=async" ];
};
fileSystems."/swap" =
{ device = "/dev/disk/by-label/NIXROOT";
fsType = "btrfs";
options = [ "compress=zstd,space_cache=v2,ssd,noatime,subvol=@swap,discard=async" ];
};
swapDevices = [ ];
networking = {
useDHCP = false; # Deprecated
hostName = "kabtopci";
domain = "ci.kabtop.de";
networkmanager = {
enable = false;
};
interfaces = {
ens3 = {
useDHCP = false; # For versatility sake, manually edit IP on nm-applet.
ipv4.addresses = [ {
address = "195.90.221.87";
prefixLength = 22;
} ];
ipv6.addresses = [ {
address = "2a00:6800:3:d5b::2";
prefixLength = 64;
} ];
};
};
defaultGateway = "195.90.220.1";
defaultGateway6 = {
address = "2a00:6800:3::1";
interface = "ens3";
};
nameservers = [ "9.9.9.9" "2620:fe::fe" ];
firewall = {
enable = true;
allowedUDPPorts = [ ];
allowedTCPPorts = [ 80 443 ];
};
};
hardware.cpu.amd.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
}

39
hosts/kabtopci/home.nix
View File

@ -1,39 +0,0 @@
#
# Home-manager configuration for laptop
#
# flake.nix
# ├─ ./hosts
# │ └─ ./laptop
# │ └─ home.nix *
# └─ ./modules
# └─ ./desktop
# └─ ./hyprland
# └─ hyprland.nix
#
{ pkgs, ... }:
{
imports =
[
../../modules/home.nix # Window Manager
];
home = { # Specific packages for laptop
packages = with pkgs; [
# Applications
# Display
#light # xorg.xbacklight not supported. Other option is just use xrandr.
# Power Management
#auto-cpufreq # Power management
#tlp # Power management
];
};
programs = {
alacritty.settings.font.size = 11;
};
}

58
hosts/kubemaster-1/default.nix
View File

@ -1,58 +0,0 @@
#
# Specific system configuration settings for desktop
#
# flake.nix
# ├─ ./hosts
# │ └─ ./laptop
# │ ├─ default.nix *
# │ └─ hardware-configuration.nix
# └─ ./modules
# ├─ ./desktop
# │ └─ ./hyprland
# │ └─ hyprland.nix
# ├─ ./modules
# │ └─ ./programs
# │ └─ waybar.nix
# └─ ./hardware
# └─ default.nix
#
{ config, pkgs, user, agenix, impermanence, ... }:
{
imports = # For now, if applying to other system, swap files
[(import ./hardware-configuration.nix)] ++ # Current system hardware config @ /etc/nixos/hardware-configuration.nix
[(import ../../modules/wm/virtualisation/docker.nix)] ++ # Docker
[(import ../../modules/wm/virtualisation/kvm-intel.nix)] ++ # Docker
(import ../../modules/services/kubemaster); # Server Services
boot = { # Boot options
kernelPackages = pkgs.linuxPackages_latest;
loader = { # EFI Boot
systemd-boot.enable = true;
efi = {
canTouchEfiVariables = true;
efiSysMountPoint = "/boot";
};
timeout = 1; # Grub auto select time
};
};
programs = { # No xbacklight, this is the alterantive
zsh.enable = true;
};
services = {
avahi = { # Needed to find wireless printer
enable = true;
nssmdns4 = true;
publish = { # Needed for detecting the scanner
enable = true;
addresses = true;
userServices = true;
};
};
};
}

117
hosts/kubemaster-1/hardware-configuration.nix
View File

@ -1,117 +0,0 @@
#
# Hardware settings for Teclast F5 10" Laptop
# NixOS @ sda2
#
# flake.nix
# └─ ./hosts
# └─ ./laptop
# └─ hardware-configuration.nix *
#
# Do not modify this file! It was generated by ‘nixos-generate-config’
# and may be overwritten by future invocations. Please make changes
# to /etc/nixos/configuration.nix instead.
{ config, lib, pkgs, modulesPath, ... }:
{
imports =
[ (modulesPath + "/installer/scan/not-detected.nix")
];
boot.initrd.availableKernelModules = [ "xhci_pci" "ahci" "nvme" "usb_storage" "usbhid" "sd_mod" "sr_mod" ];
boot.initrd.kernelModules = [ "vfio_pci" "vfio" "vfio_iommu_type1" ];
boot.kernelModules = [ "kvm-intel" ];
boot.extraModulePackages = [ ];
boot.tmp.useTmpfs = false;
boot.tmp.cleanOnBoot = true;
zramSwap.enable = true;
services.btrfs.autoScrub = {
enable = true;
interval = "monthly";
fileSystems = [
"/"
];
};
fileSystems."/" =
{ device = "/dev/disk/by-label/NIXROOT";
fsType = "btrfs";
options = [ "compress=zstd,space_cache=v2,ssd,noatime,subvol=@,discard=async" ];
};
fileSystems."/home" =
{ device = "/dev/disk/by-label/NIXROOT";
fsType = "btrfs";
options = [ "compress=zstd,space_cache=v2,ssd,noatime,subvol=@home,discard=async" ];
};
fileSystems."/srv" =
{ device = "/dev/disk/by-label/NIXROOT";
fsType = "btrfs";
options = [ "compress=zstd,space_cache=v2,ssd,noatime,subvol=@srv,discard=async" ];
};
fileSystems."/var" =
{ device = "/dev/disk/by-label/NIXROOT";
fsType = "btrfs";
options = [ "compress=zstd,space_cache=v2,ssd,noatime,subvol=@var,discard=async" ];
};
fileSystems."/nix" =
{ device = "/dev/disk/by-label/NIXROOT";
fsType = "btrfs";
options = [ "compress=zstd,space_cache=v2,ssd,noatime,subvol=@nix,discard=async" ];
};
fileSystems."/swap" =
{ device = "/dev/disk/by-label/NIXROOT";
fsType = "btrfs";
options = [ "compress=zstd,space_cache=v2,ssd,noatime,subvol=@swap,discard=async" ];
};
fileSystems."/mnt/snapshots/root" =
{ device = "/dev/disk/by-label/NIXROOT";
fsType = "btrfs";
options = [ "compress=zstd,space_cache=v2,ssd,noatime,subvolid=5,discard=async" ];
};
swapDevices = [ ];
systemd.network = {
enable = true;
networks = {
"10-lan" = {
matchConfig.Name = "enp0s31f6";
ntp = [ "192.168.2.1" ];
#domains = [ "home.opel-online.de" ];
networkConfig = {
DHCP = "yes";
IPv6AcceptRA = true;
};
dns = [
"192.168.2.1"
];
};
};
};
networking = {
useDHCP = false; # Deprecated
hostName = "kubemaster-1";
firewall = {
enable = true;
allowedUDPPorts = [ ];
allowedTCPPorts = [ 80 443 ];
};
};
hardware.cpu.intel.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
powerManagement = {
cpuFreqGovernor = lib.mkDefault "powersave";
powertop.enable = true;
powerUpCommands = ''
${pkgs.hdparm}/sbin/hdparm -S 150 /dev/disk/by-uuid/e036f437-bc91-4398-b182-7cf5724e23a2
'';
};
nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
}

39
hosts/kubemaster-1/home.nix
View File

@ -1,39 +0,0 @@
#
# Home-manager configuration for laptop
#
# flake.nix
# ├─ ./hosts
# │ └─ ./laptop
# │ └─ home.nix *
# └─ ./modules
# └─ ./desktop
# └─ ./hyprland
# └─ hyprland.nix
#
{ pkgs, ... }:
{
imports =
[
../../modules/home.nix # Window Manager
];
home = { # Specific packages for laptop
packages = with pkgs; [
# Applications
# Display
#light # xorg.xbacklight not supported. Other option is just use xrandr.
# Power Management
#auto-cpufreq # Power management
#tlp # Power management
];
};
programs = {
alacritty.settings.font.size = 11;
};
}

31
hosts/nbf5/default.nix → hosts/laptop/default.nix
View File

@ -23,11 +23,10 @@
imports = # For now, if applying to other system, swap files
[(import ./hardware-configuration.nix)] ++ # Current system hardware config @ /etc/nixos/hardware-configuration.nix
#[(import ../../modules/wm/hyprland/default.nix)] ++ # Window Manager
# [(import ../../modules/wm/sway/default.nix)] ++ # Window Manager
[(import ../../modules/wm/sway/default.nix)] ++ # Window Manager
[(import ../../modules/wm/virtualisation/docker.nix)] ++ # Docker
[(import ../../modules/wm/virtualisation/kvm-intel.nix)] ++ # kvm module options
(import ../../modules/hardware) ++
(import ../../modules/services/printer); # Hardware devices
(import ../../modules/hardware); # Hardware devices
boot = { # Boot options
kernelPackages = pkgs.linuxPackages_latest;
@ -42,14 +41,32 @@
};
};
# hardware.sane = { # Used for scanning with Xsane
# enable = false;
# extraBackends = [ pkgs.sane-airscan ];
# };
hardware = {
nitrokey.enable = true;
};
environment = {
systemPackages = with pkgs; [
# simple-scan
intel-media-driver
# alacritty
];
};
programs = { # No xbacklight, this is the alterantive
zsh.enable = true;
dconf.enable = true;
light.enable = true;
ssh.startAgent = false;
gnupg.agent = {
enable = true;
enableSSHSupport = true;
pinentryFlavor = "curses";
};
};
services = {
@ -63,15 +80,21 @@
logind.lidSwitch = "suspend-then-hibernate"; # Laptop does not go to sleep when lid is closed
#auto-cpufreq.enable = true;
blueman.enable = true;
printing = { # Printing and drivers for TS5300
enable = true;
drivers = [ pkgs.gutenprint ];
};
avahi = { # Needed to find wireless printer
enable = true;
nssmdns4 = true;
nssmdns = true;
publish = { # Needed for detecting the scanner
enable = true;
addresses = true;
userServices = true;
};
};
tailscale.enable = true;
};
#temporary bluetooth fix

23
hosts/nbf5/hardware-configuration.nix → hosts/laptop/hardware-configuration.nix
View File

@ -134,19 +134,30 @@
networking = {
useDHCP = false; # Deprecated
hostName = "nbf5";
wireless = {
iwd.enable = true;
interfaces = [ "wlan0" ];
wireless.iwd.enable = true;
networkmanager = {
enable = true;
wifi = {
backend = "iwd";
powersave = true;
};
};
interfaces = {
wlan0 = {
useDHCP = true; # For versatility sake, manually edit IP on nm-applet.
#ipv4.addresses = [ {
# address = "192.168.0.51";
# prefixLength = 24;
#} ];
};
};
#defaultGateway = "192.168.0.1";
#nameservers = [ "192.168.0.4" ];
firewall = {
enable = true;
#allowedUDPPorts = [ 53 67 ];
allowedTCPPorts = [ 80 443 ];
checkReversePath = "loose";
# enable = false;
# #allowedUDPPorts = [ 53 67 ];
# #allowedTCPPorts = [ 53 80 443 9443 ];
};
};

4
hosts/lifebook/home.nix → hosts/laptop/home.nix
View File

@ -43,6 +43,10 @@
];
};
programs = {
alacritty.settings.font.size = 11;
};
services = { # Applets
blueman-applet.enable = true; # Bluetooth
network-manager-applet.enable = true; # Network

81
hosts/lifebook/default.nix
View File

@ -1,81 +0,0 @@
#
# Specific system configuration settings for desktop
#
# flake.nix
# ├─ ./hosts
# │ └─ ./laptop
# │ ├─ default.nix *
# │ └─ hardware-configuration.nix
# └─ ./modules
# ├─ ./desktop
# │ └─ ./hyprland
# │ └─ hyprland.nix
# ├─ ./modules
# │ └─ ./programs
# │ └─ waybar.nix
# └─ ./hardware
# └─ default.nix
#
{ lib, config, pkgs, user, ... }:
{
imports = # For now, if applying to other system, swap files
[(import ./hardware-configuration.nix)] ++ # Current system hardware config @ /etc/nixos/hardware-configuration.nix
#[(import ../../modules/wm/hyprland/default.nix)] ++ # Window Manager
[(import ../../modules/wm/sway/default.nix)] ++ # Window Manager
[(import ../../modules/wm/virtualisation/docker.nix)] ++ # Docker
[(import ../../modules/wm/virtualisation/kvm-intel.nix)] ++ # kvm module options
(import ../../modules/hardware); # Hardware devices
boot = { # Boot options
kernelPackages = pkgs.linuxPackages_latest;
initrd.prepend = [ "${./patched-SSDT4}" ];
loader = { # EFI Boot
systemd-boot.enable = lib.mkForce false;
efi = {
canTouchEfiVariables = true;
efiSysMountPoint = "/boot";
};
timeout = 1; # Grub auto select time
};
lanzaboote = {
enable = true;
pkiBundle = "/etc/secureboot";
};
};
hardware = {
nitrokey.enable = true;
};
environment = {
systemPackages = with pkgs; [
linux-firmware
intel-media-driver
];
};
programs = { # No xbacklight, this is the alterantive
light.enable = true;
};
systemd.sleep.extraConfig = "HibernateDelaySec=1h";
services = {
logind.lidSwitch = "suspend-then-hibernate"; # Laptop does not go to sleep when lid is closed
blueman.enable = true;
avahi = { # Needed to find wireless printer
enable = true;
nssmdns4 = true;
publish = { # Needed for detecting the scanner
enable = true;
addresses = true;
userServices = true;
};
};
#tailscale.enable = true;
};
}

224
hosts/lifebook/hardware-configuration.nix
View File

@ -1,224 +0,0 @@
#
# Hardware settings for Teclast F5 10" Laptop
# NixOS @ sda2
#
# flake.nix
# └─ ./hosts
# └─ ./laptop
# └─ hardware-configuration.nix *
#
# Do not modify this file! It was generated by ‘nixos-generate-config’
# and may be overwritten by future invocations. Please make changes
# to /etc/nixos/configuration.nix instead.
{ config, lib, pkgs, modulesPath, ... }:
{
imports =
[ (modulesPath + "/installer/scan/not-detected.nix")] ++
[( import ../../modules/hardware/backup.nix )];
boot = {
initrd = {
availableKernelModules = [ "xhci_pci" "thunderbolt" "nvme" "usb_storage" "sd_mod" "sdhci_pci" ];
kernelModules = [ "i915" "kvm_intel" "vfio_pci" "vfio" "vfio_iommu_type1" ];
systemd.enable = true;
luks = {
devices."crypted" = {
device = "/dev/disk/by-partlabel/disk-nvme0n1-luks";
allowDiscards = true;
bypassWorkqueues = true;
};
};
};
kernelModules = [ "kvm-intel" ];
kernelParams = [ "luks.options=fido2-device=auto" "sysrq_always_enabled=1" "pcie_aspm=force" ];
extraModprobeConfig = ''
options i915 enable_guc=3
'';
tmp.useTmpfs = false;
tmp.cleanOnBoot = true;
};
zramSwap.enable = true;
services = {
btrfs.autoScrub = {
enable = true;
interval = "monthly";
fileSystems = [
"/"
];
};
udev.extraRules = ''
ACTION=="add", SUBSYSTEM=="block", KERNEL=="mmcblk[0-9]p[0-9]", ENV{ID_FS_USAGE}=="filesystem", RUN{program}+="${pkgs.systemd}/bin/systemd-mount -o noatime,compress-force=zstd:15,ssd_spread,commit=120 --no-block --automount=yes --collect $devnode /run/media/mmcblk0p1"
'';
btrbk = {
extraPackages = [ pkgs.lz4 pkgs.mbuffer ];
instances = {
hf = {
onCalendar = "hourly";
settings = {
incremental = "yes";
snapshot_create = "ondemand";
snapshot_dir = "@snapshots";
timestamp_format = "long";
snapshot_preserve = "2m 2w 5d 5h";
snapshot_preserve_min = "latest";
volume = {
"/mnt/snapshots/root" = {
snapshot_create = "always";
subvolume = {
"@home" = {};
};
};
};
};
};
bak = {
onCalendar = "daily";
settings = {
stream_buffer = "256m";
stream_compress = "lz4";
incremental = "yes";
snapshot_create = "no";
snapshot_dir = "@snapshots";
timestamp_format = "long";
snapshot_preserve_min = "all";
target_preserve_min = "no";
target_preserve = "2m 4w 3d";
ssh_identity = "/etc/btrbk/ssh/id_ed25519_btrbk_nas";
ssh_user = "btrbk";
volume = {
"/mnt/snapshots/root" = {
subvolume = {
"@home" = {};
};
target = "ssh://jupiter.home.opel-online.de:2220/mnt/snapshots/Mars/@snapshots/@lifebook";
};
};
};
};
};
};
};
systemd.timers = {
btrbk-bak = {
after = [ "network-online.target" ];
requires = [ "network-online.target" ];
};
};
fileSystems."/" =
{ device = "/dev/mapper/crypted";
fsType = "btrfs";
options = [ "compress=zstd,space_cache=v2,ssd,noatime,subvol=@,discard=async" ];
};
fileSystems."/boot" =
{ device = "/dev/disk/by-label/NIXBOOT";
fsType = "vfat";
};
fileSystems."/home" =
{ device = "/dev/mapper/crypted";
fsType = "btrfs";
options = [ "compress=zstd,space_cache=v2,ssd,noatime,subvol=@home,discard=async" ];
};
fileSystems."/nix" =
{ device = "/dev/mapper/crypted";
fsType = "btrfs";
options = [ "compress=zstd,space_cache=v2,ssd,noatime,subvol=@nix,discard=async" ];
};
fileSystems."/srv" =
{ device = "/dev/mapper/crypted";
fsType = "btrfs";
options = [ "compress=zstd,space_cache=v2,ssd,noatime,subvol=@srv,discard=async" ];
};
fileSystems."/swap" =
{ device = "/dev/mapper/crypted";
fsType = "btrfs";
options = [ "compress=zstd,space_cache=v2,ssd,noatime,subvol=@swap,discard=async" ];
};
fileSystems."/opt" =
{ device = "/dev/mapper/crypted";
fsType = "btrfs";
options = [ "compress=zstd,space_cache=v2,ssd,noatime,subvol=@opt,discard=async" ];
};
fileSystems."/var" =
{ device = "/dev/mapper/crypted";
fsType = "btrfs";
options = [ "compress=zstd,space_cache=v2,ssd,noatime,subvol=@var,discard=async" ];
};
fileSystems."/mnt/snapshots/root" =
{ device = "/dev/mapper/crypted";
fsType = "btrfs";
options = [ "compress=zstd,space_cache=v2,ssd,noatime,subvolid=5,discard=async" ];
};
fileSystems."/mnt/Pluto" =
{ device = "jupiter:/Pluto";
fsType = "nfs";
options = [ "nofail,noauto,users,x-systemd.automount,x-systemd.device-timeout=10,soft,timeo=14,x-systemd.idle-timeout=1min,sec=sys,exec,nfsvers=4.2" ];
};
fileSystems."/mnt/Mars" =
{ device = "jupiter:/Mars";
fsType = "nfs";
options = [ "nofail,noauto,users,x-systemd.automount,x-systemd.device-timeout=10,soft,timeo=14,x-systemd.idle-timeout=1min,sec=sys,exec,nfsvers=4.2" ];
};
swapDevices = [ { device = "/swap/swapfile"; } ];
networking = {
useDHCP = false; # Deprecated
hostName = "lifebook";
wireless.iwd.enable = true;
networkmanager = {
enable = true;
wifi = {
backend = "iwd";
powersave = true;
};
};
# interfaces = {
# wlan0 = {
# useDHCP = true; # For versatility sake, manually edit IP on nm-applet.
# #ipv4.addresses = [ {
# # address = "192.168.0.51";
# # prefixLength = 24;
# #} ];
# };
# };
#defaultGateway = "192.168.0.1";
#nameservers = [ "192.168.0.4" ];
firewall = {
checkReversePath = false;
enable = true;
allowedUDPPorts = [ 24727 51820 ];
allowedTCPPorts = [ 24727 ];
};
};
hardware.cpu.intel.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
powerManagement = {
powertop.enable = true;
};
}

BIN
hosts/lifebook/patched-SSDT4
View File

Binary file not shown.

2
hosts/nas/default.nix
View File

@ -53,7 +53,7 @@
gnupg.agent = {
enable = false;
enableSSHSupport = true;
pinentryPackage = pkgs.pinentry-curses;
pinentryFlavor = "curses";
};
};

4
hosts/nasbackup/default.nix
View File

@ -45,7 +45,7 @@
gnupg.agent = {
enable = false;
enableSSHSupport = true;
pinentryPackage = pkgs.pinentry-curses;
pinentryFlavor = "curses";
};
};
@ -53,7 +53,7 @@
qemuGuest.enable = true;
avahi = { # Needed to find wireless printer
enable = true;
nssmdns4 = true;
nssmdns = true;
publish = { # Needed for detecting the scanner
enable = true;
addresses = true;

102
hosts/nasbackup/hardware-configuration.nix
View File

@ -51,7 +51,7 @@
};
services.btrbk = {
extraPackages = [ pkgs.lz4 pkgs.mbuffer ];
extraPackages = [ pkgs.lz4 ];
instances = {
hf = {
onCalendar = "hourly";
@ -78,7 +78,6 @@
bak = {
onCalendar = "weekly";
settings = {
stream_buffer = "265m";
stream_compress = "lz4";
incremental = "yes";
snapshot_create = "no";
@ -88,35 +87,20 @@
snapshot_preserve_min = "all";
target_preserve_min = "no";
target_preserve = "4w 2m";
archive_preserve_min = "no";
archive_preserve = "4w 2m";
ssh_identity = "/etc/btrbk/ssh/id_ed25519_btrbk";
ssh_user = "btrbk";
volume = {
"ssh://jupiter.home.opel-online.de:2220/mnt/snapshots/Mars" = {
"ssh://jupiter.home.opel-online.de/mnt/snapshots/Mars" = {
target = "/mnt/nas/Backups/Mars";
subvolume = {
"@nas" = {
target = "/mnt/nas/Backups/Mars";
};
"@hades/@home" = {
target = "/mnt/nas/Backups/Hades";
snapshot_dir = "@snapshots/@hades";
};
"@lifebook/@home" = {
target = "/mnt/nas/Backups/Lifebook";
snapshot_dir = "@snapshots/@lifebook";
};
# "@steamdeck/@home" = {
# target = "/mnt/nas/Backups/Steamdeck";
# snapshot_dir = "@snapshots/@steamdeck";
# };
"@nas" = {};
};
};
};
volume = {
"ssh://jupiter.home.opel-online.de:2220/mnt/snapshots/Pluto" = {
"ssh://jupiter.home.opel-online.de/mnt/snapshots/Pluto" = {
target = "/mnt/nas/Backups/Pluto";
subvolume = {
"@/Games" = {};
@ -129,17 +113,36 @@
};
};
};
# lf = {
# onCalendar = "daily";
# settings = {
# incremental = "yes";
# snapshot_create = "ondemand";
# snapshot_dir = "@snapshots";
# timestamp_format = "long";
#
# snapshot_preserve = "2m 2w 5d";
# snapshot_preserve_min = "latest";
#
# volume = {
# "/mnt/snapshots/Pluto" = {
# snapshot_create = "always";
# subvolume = {
# "@" = {};
# "@/Backups" = {};
# "@/Games" = {};
# "@/IT" = {};
# "@/Media" = {};
# "@/Pictures" = {};
# "@/Rest" = {};
# };
# };
# };
# };
# };
};
};
systemd.services = {
btrbk-bak = {
after = [ "network-online.target" ];
requires = [ "network-online.target" ];
};
};
fileSystems."/" =
{ device = "/dev/disk/by-label/NIXROOT";
fsType = "btrfs";
@ -195,24 +198,35 @@
swapDevices = [ { device = "/swap/swapfile"; } ];
systemd.network = {
enable = true;
networks = {
"10-lan" = {
matchConfig.Name = "ens18";
ntp = [ "192.168.2.1" ];
#domains = [ "home.opel-online.de" ];
networkConfig = {
DHCP = "yes";
IPv6AcceptRA = true;
};
};
};
};
networking = {
hostName = "nasbak";
domain = "home.opel-online.de";
useDHCP = false; # For versatility sake, manually edit IP on nm-applet.
networkmanager = {
enable = false;
};
timeServers = [
"192.168.2.1"
];
interfaces = {
enp6s18 = {
useDHCP = true; # For versatility sake, manually edit IP on nm-applet.
# ipv4.addresses = [ {
# address = "45.142.114.153";
# prefixLength = 24;
# } ];
# ipv6.addresses = [ {
# address = "2a00:ccc1:101:19D::2";
# prefixLength = 64;
# } ];
# };
};
};
# defaultGateway = "45.142.114.1";
defaultGateway6 = {
address = "fe80::1";
interface = "enp6s18";
};
# nameservers = [ "9.9.9.9" "2620:fe::fe" ];
#firewall = {
# enable = false;
# #allowedUDPPorts = [ 53 67 ];

51
hosts/nbf5/home.nix
View File

@ -1,51 +0,0 @@
#
# Home-manager configuration for laptop
#
# flake.nix
# ├─ ./hosts
# │ └─ ./laptop
# │ └─ home.nix *
# └─ ./modules
# └─ ./desktop
# └─ ./hyprland
# └─ hyprland.nix
#
{ pkgs, ... }:
{
imports =
[
#../../modules/wm/hyprland/home.nix # Window Manager
#../../modules/wm/sway/home.nix # Window Manager
../../modules/home.nix # Window Manager
];
home = { # Specific packages for laptop
packages = with pkgs; [
# Applications
firefox
intel-gpu-tools
pulsemixer
# Display
light # xorg.xbacklight not supported. Other option is just use xrandr.
# Power Management
#auto-cpufreq # Power management
#tlp # Power management
];
};
programs = {
alacritty.settings.font.size = 11;
};
services = { # Applets
blueman-applet.enable = true; # Bluetooth
network-manager-applet.enable = true; # Network
};
xsession.preferStatusNotifierItems = true;
}

20
hosts/server/default.nix
View File

@ -57,22 +57,22 @@
gnupg.agent = {
enable = true;
enableSSHSupport = true;
pinentryPackage = pkgs.pinentry-curses;
pinentryFlavor = "curses";
};
};
services = {
#auto-cpufreq.enable = true;
qemuGuest.enable = true;
#avahi = { # Needed to find wireless printer
# enable = true;
# nssmdns = true;
# publish = { # Needed for detecting the scanner
# enable = true;
# addresses = true;
# userServices = true;
# };
#};
avahi = { # Needed to find wireless printer
enable = true;
nssmdns = true;
publish = { # Needed for detecting the scanner
enable = true;
addresses = true;
userServices = true;
};
};
fail2ban = {
enable = true;
maxretry = 5;

32
hosts/steamdeck/default.nix
View File

@ -20,22 +20,12 @@
{ config, pkgs, user, jovian-nixos, lib, ... }:
{
specialisation = {
sway.configuration = {
imports =
[(import ../../modules/wm/sway)];
jovian.steam.enable = lib.mkForce false;
services.desktopManager.plasma6.enable = lib.mkForce false;
};
};
imports = # For now, if applying to other system, swap files
[(import ./hardware-configuration.nix)] ++ # Current system hardware config @ /etc/nixos/hardware-configuration.nix
[(import ../../modules/wm/steam/default.nix)] ++ # jovian steam
[(import ../../modules/wm/kde/default.nix)] ++ # Window Manager
(import ../../modules/wm/virtualisation) ++ # libvirt + Docker
[(import ../../modules/wm/virtualisation/kvm-amd.nix)] ++ # kvm module options
[(import ../../modules/wm/steam)] ++
[(import ../../modules/wm/kde)] ++
(import ../../modules/hardware); # Hardware devices
boot = { # Boot options
@ -54,12 +44,30 @@
};
};
# hardware.sane = { # Used for scanning with Xsane
# enable = false;
# extraBackends = [ pkgs.sane-airscan ];
# };
hardware = {
nitrokey.enable = true;
};
# environment = {
# systemPackages = with pkgs; [
## alacritty
# ];
# };
programs = { # No xbacklight, this is the alterantive
zsh.enable = true;
dconf.enable = true;
light.enable = true;
ssh.startAgent = false;
gnupg.agent = {
enable = true;
enableSSHSupport = true;
#pinentryFlavor = "curses";
};
};
services = {

77
hosts/steamdeck/hardware-configuration.nix
View File

@ -19,7 +19,7 @@
boot = {
initrd = {
availableKernelModules = [ "nvme" "xhci_pci" "usb_storage" "usbhid" "sd_mod" "sdhci_pci" ];
availableKernelModules = [ "nvme" "xhci_pci" "usb_storage" "usbhid" "sd_mod" "sdhci_pci" ];
kernelModules = [ ];
systemd.enable = true;
luks = {
@ -50,66 +50,33 @@
udev.extraRules = ''
ACTION=="add", SUBSYSTEM=="block", KERNEL=="mmcblk[0-9]p[0-9]", ENV{ID_FS_USAGE}=="filesystem", RUN{program}+="${pkgs.systemd}/bin/systemd-mount -o noatime,compress-force=zstd:15,ssd_spread,commit=120 --no-block --automount=yes --collect $devnode /run/media/mmcblk0p1"
'';
};
btrbk = {
instances = {
hf = {
onCalendar = "hourly";
settings = {
incremental = "yes";
snapshot_create = "ondemand";
snapshot_dir = "@snapshots";
timestamp_format = "long";
services.btrbk = {
instances = {
hf = {
onCalendar = "hourly";
settings = {
incremental = "yes";
snapshot_create = "ondemand";
snapshot_dir = "@snapshots";
timestamp_format = "long";
snapshot_preserve = "2m 2w 5d 5h";
snapshot_preserve_min = "latest";
volume = {
"/mnt/snapshots/root" = {
snapshot_create = "always";
subvolume = {
"@home" = {};
};
snapshot_preserve = "2m 2w 5d 5h";
snapshot_preserve_min = "latest";
volume = {
"/mnt/snapshots/root" = {
snapshot_create = "always";
subvolume = {
"@home" = {};
};
};
};
};
# bak = {
# onCalendar = "daily";
# settings = {
# stream_buffer = "256m";
# stream_compress = "lz4";
# incremental = "yes";
# snapshot_create = "no";
# snapshot_dir = "@snapshots";
# timestamp_format = "long";
#
# snapshot_preserve_min = "all";
# target_preserve_min = "no";
# target_preserve = "2m 4w 3d";
#
# ssh_identity = "/etc/btrbk/ssh/id_ed25519_btrbk_nas";
# ssh_user = "btrbk";
#
# volume = {
# "/mnt/snapshots/root" = {
# subvolume = {
# "@home" = {};
# };
# target = "ssh://jupiter.home.opel-online.de:2220/mnt/snapshots/Mars/@snapshots/@steamdeck";
# };
# };
# };
# };
};
};
};
#
# systemd.timers = {
# btrbk-bak = {
# requires = [ "network-online.target" ];
# };
# };
fileSystems."/" =
{ device = "/dev/mapper/crypted";
@ -204,9 +171,9 @@
#nameservers = [ "192.168.0.4" ];
firewall = {
checkReversePath = "loose";
enable = true;
allowedUDPPorts = [ 24727 ];
allowedTCPPorts = [ 24727 ];
# enable = false;
# #allowedUDPPorts = [ 53 67 ];
# #allowedTCPPorts = [ 53 80 443 9443 ];
};
};

19
hosts/steamdeck/home.nix
View File

@ -14,17 +14,12 @@
{ pkgs, ... }:
{
specialisation = {
sway.configuration = {
imports =
[(import ../../modules/wm/sway/home.nix)];
};
};
imports =
[(import ../../modules/home.nix)] ++ # Window Manager
[(import ../../modules/wm/steam/home.nix)] ++
[(import ../../modules/wm/kde/home.nix)];
[
../../modules/wm/steam/home.nix # Window Manager
../../modules/wm/kde/home.nix # Window Manager
../../modules/home.nix # Window Manager
];
home = { # Specific packages for laptop
packages = with pkgs; [
@ -48,6 +43,10 @@
];
};
programs = {
alacritty.settings.font.size = 11;
};
services = { # Applets
};

114
modules/hardware/autoaspm.py
View File

@ -1,114 +0,0 @@
#!/usr/bin/env python3
# Original bash script by Luis R. Rodriguez
# Re-written in Python by z8
# Re-re-written to patch supported devices automatically by notthebee
import re
import subprocess
import os
import platform
from enum import Enum
class ASPM(Enum):
DISABLED = 0b00
L0s = 0b01
L1 = 0b10
L0sL1 = 0b11
def run_prerequisites():
if platform.system() != "Linux":
raise OSError("This script only runs on Linux-based systems")
if not os.environ.get("SUDO_UID") and os.geteuid() != 0:
raise PermissionError("This script needs root privileges to run")
lspci_detected = subprocess.run(["which", "lspci"], stdout = subprocess.DEVNULL, stderr = subprocess.DEVNULL)
if lspci_detected.returncode > 0:
raise Exception("lspci not detected. Please install pciutils")
lspci_detected = subprocess.run(["which", "setpci"], stdout = subprocess.DEVNULL, stderr = subprocess.DEVNULL)
if lspci_detected.returncode > 0:
raise Exception("setpci not detected. Please install pciutils")
def get_device_name(addr):
p = subprocess.Popen([
"lspci",
"-s",
addr,
], stdout=subprocess.PIPE, stderr=subprocess.PIPE)
return p.communicate()[0].splitlines()[0].decode()
def read_all_bytes(device):
all_bytes = bytearray()
device_name = get_device_name(device)
p = subprocess.Popen([
"lspci",
"-s",
device,
"-xxx"
], stdout= subprocess.PIPE, stderr=subprocess.PIPE)
ret = p.communicate()
ret = ret[0].decode()
for line in ret.splitlines():
if not device_name in line and ": " in line:
all_bytes.extend(bytearray.fromhex(line.split(": ")[1]))
if len(all_bytes) < 256:
exit()
return all_bytes
def find_byte_to_patch(bytes, pos):
pos = bytes[pos]
if bytes[pos] != 0x10:
pos += 0x1
return find_byte_to_patch(bytes, pos)
else:
pos += 0x10
return pos
def patch_byte(device, position, value):
subprocess.Popen([
"setpci",
"-s",
device,
f"{hex(position)}.B={hex(value)}"
]).communicate()
def patch_device(addr, aspm_value):
endpoint_bytes = read_all_bytes(addr)
byte_position_to_patch = find_byte_to_patch(endpoint_bytes, 0x34)
if int(endpoint_bytes[byte_position_to_patch]) & 0b11 != aspm_value.value:
patched_byte = int(endpoint_bytes[byte_position_to_patch])
patched_byte = patched_byte >> 2
patched_byte = patched_byte << 2
patched_byte = patched_byte | aspm_value.value
patch_byte(addr, byte_position_to_patch, patched_byte)
print(f"{addr}: Enabled ASPM {aspm_value.name}")
else:
print(f"{addr}: Already has ASPM {aspm_value.name} enabled")
def list_supported_devices():
pcie_addr_regex = r"([0-9a-f]{2}:[0-9a-f]{2}.[0-9a-f])"
lspci = subprocess.run("lspci -vv", shell=True, capture_output=True).stdout
lspci_arr = re.split(pcie_addr_regex, str(lspci))[1:]
lspci_arr = [ x+y for x,y in zip(lspci_arr[0::2], lspci_arr[1::2]) ]
aspm_devices = {}
for dev in lspci_arr:
device_addr = re.findall(pcie_addr_regex, dev)[0]
if "ASPM" not in dev or "ASPM not supported" in dev:
continue
aspm_support = re.findall(r"ASPM (L[L0-1s ]*),", dev)
if aspm_support:
aspm_devices.update({device_addr: ASPM[aspm_support[0].replace(" ", "")]})
return aspm_devices
def main():
run_prerequisites()
for device, aspm_mode in list_supported_devices().items():
patch_device(device, aspm_mode)
if __name__ == "__main__":
main()

5
modules/hardware/backup.nix
View File

@ -9,10 +9,7 @@
key = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIDU2NJ9xwYnp6/frIOv96ih8psiFcC2eOQeT+ZEMW5rq";
roles = [ "source" "info" "send" ];
}
{
key = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIIma7jNVQZM+lFMOKUex0+cyDpeUA3Wo4SEJ7P9YnHPG";
roles = [ "target" "info" "receive" "delete" ];
}
];
extraPackages = [ pkgs.lz4 ];
};
}

3
modules/hardware/bluetooth.nix
View File

@ -14,7 +14,4 @@
};
};
};
environment.systemPackages = with pkgs; [
zmkBATx
];
}

21
modules/hardware/hydraCache.nix
View File

@ -1,21 +0,0 @@
{ config, lib, pkgs, ... }:
{
nix = {
settings = {
extra-trusted-public-keys = [
"hades-builder:AFdPgi6Qq/yKqc2V2imgzMikEkVEFCrDaHyAmOJ3MII="
"steamdeck.cachix.org-1:BVoP4TEu3ECgotaO+3J3r9SSn62GkUDBwizOFU/q4Bc="
];
extra-substituters = [
"https://steamdeck.cachix.org"
"https://cache.ci.kabtop.de"
];
#extra-trusted-substituters = [
# "https://cache.home.opel-online.de"
#];
};
};
}

32
modules/kabbone/mautrix-whatsapp.md
View File

@ -1,32 +0,0 @@
# Mautrix-Whatsapp {#module-services-mautrix-whatsapp}
[Mautrix-Whatsapp](https://github.com/mautrix/whatsapp) is a Matrix-Whatsapp puppeting bridge.
## Configuration {#module-services-mautrix-whatsapp-configuration}
1. Set [](#opt-services.mautrix-whatsapp.enable) to `true`. The service will use
SQLite by default.
2. To create your configuration check the default configuration for
[](#opt-services.mautrix-whatsapp.settings). To obtain the complete default
configuration, run
`nix-shell -p mautrix-whatsapp --run "mautrix-whatsapp -c default.yaml -e"`.
::: {.warning}
Mautrix-Whatsapp allows for some options like `encryption.pickle_key`,
`provisioning.shared_secret`, allow the value `generate` to be set.
Since the configuration file is regenerated on every start of the
service, the generated values would be discarded and might break your
installation. Instead, set those values via
[](#opt-services.mautrix-whatsapp.environmentFile).
:::
## Migrating from an older configuration {#module-services-mautrix-whatsapp-migrate-configuration}
With Mautrix-Whatsapp v0.7.0 the configuration has been rearranged. Mautrix-Whatsapp
performs an automatic configuration migration so your pre-0.7.0 configuration
should just continue to work.
In case you want to update your NixOS configuration, compare the migrated configuration
at `/var/lib/mautrix-whatsapp/config.yaml` with the default configuration
(`nix-shell -p mautrix-whatsapp --run "mautrix-whatsapp -c example.yaml -e"`) and
update your module configuration accordingly.

280
modules/kabbone/mautrix-whatsapp.nix
View File

@ -1,280 +0,0 @@
{
lib,
config,
pkgs,
...
}:
let
cfg = config.services.kabbone_mautrix-whatsapp;
dataDir = "/var/lib/mautrix-whatsapp";
registrationFile = "${dataDir}/whatsapp-registration.yaml";
settingsFile = "${dataDir}/config.yaml";
settingsFileUnsubstituted = settingsFormat.generate "mautrix-whatsapp-config-unsubstituted.json" cfg.settings;
settingsFormat = pkgs.formats.json { };
appservicePort = 29318;
# to be used with a list of lib.mkIf values
optOneOf = lib.lists.findFirst (value: value.condition) (lib.mkIf false null);
mkDefaults = lib.mapAttrsRecursive (n: v: lib.mkDefault v);
defaultConfig = {
network = {
displayname_template = "{{or .BusinessName .PushName .Phone}} (WA)";
identity_change_notices = true;
history_sync = {
request_full_sync = true;
};
};
bridge = {
command_prefix = "!wa";
relay.enabled = true;
permissions."*" = "relay";
};
database = {
type = "sqlite3";
uri = "file:${dataDir}/mautrix-whatsapp.db?_txlock=immediate";
};
homeserver.address = "http://localhost:8448";
appservice = {
hostname = "[::]";
port = appservicePort;
id = "whatsapp";
bot = {
username = "whatsappbot";
displayname = "WhatsApp Bridge Bot";
};
as_token = "";
hs_token = "";
username_template = "whatsapp_{{.}}";
};
double_puppet = {
servers = { };
secrets = { };
};
# By default, the following keys/secrets are set to `generate`. This would break when the service
# is restarted, since the previously generated configuration will be overwritten everytime.
# If encryption is enabled, it's recommended to set those keys via `environmentFile`.
encryption.pickle_key = "";
provisioning.shared_secret = "";
public_media.signing_key = "";
direct_media.server_key = "";
logging = {
min_level = "info";
writers = lib.singleton {
type = "stdout";
format = "pretty-colored";
time_format = " ";
};
};
};
in
{
options.services.kabbone_mautrix-whatsapp = {
enable = lib.mkEnableOption "mautrix-whatsapp, a Matrix-Whatsapp puppeting bridge";
package = lib.mkPackageOption pkgs "mautrix-whatsapp" { };
settings = lib.mkOption {
apply = lib.recursiveUpdate defaultConfig;
type = settingsFormat.type;
default = defaultConfig;
description = ''
{file}`config.yaml` configuration as a Nix attribute set.
Configuration options should match those described in the example configuration.
Get an example configuration by executing `mautrix-whatsapp -c example.yaml --generate-example-config`
Secret tokens should be specified using {option}`environmentFile`
instead of this world-readable attribute set.
'';
example = {
bridge = {
private_chat_portal_meta = true;
mute_only_on_create = false;
permissions = {
"example.com" = "user";
};
};
database = {
type = "postgres";
uri = "postgresql:///mautrix_whatsapp?host=/run/postgresql";
};
homeserver = {
address = "http://[::1]:8008";
domain = "my-domain.tld";
};
appservice = {
id = "whatsapp";
ephemeral_events = false;
};
matrix.message_status_events = true;
provisioning = {
shared_secret = "disable";
};
backfill.enabled = true;
encryption = {
allow = true;
default = true;
require = true;
pickle_key = "$ENCRYPTION_PICKLE_KEY";
};
};
};
environmentFile = lib.mkOption {
type = lib.types.nullOr lib.types.path;
default = null;
description = ''
File containing environment variables to be passed to the mautrix-signal service.
If an environment variable `MAUTRIX_WHATSAPP_BRIDGE_LOGIN_SHARED_SECRET` is set,
then its value will be used in the configuration file for the option
`double_puppet.secrets` without leaking it to the store, using the configured
`homeserver.domain` as key.
'';
};
serviceDependencies = lib.mkOption {
type = with lib.types; listOf str;
default =
(lib.optional config.services.matrix-synapse.enable config.services.matrix-synapse.serviceUnit)
++ (lib.optional config.services.matrix-conduit.enable "conduit.service");
defaultText = lib.literalExpression ''
(optional config.services.matrix-synapse.enable config.services.matrix-synapse.serviceUnit)
++ (optional config.services.matrix-conduit.enable "conduit.service")
'';
description = ''
List of systemd units to require and wait for when starting the application service.
'';
};
registerToSynapse = lib.mkOption {
type = lib.types.bool;
default = config.services.matrix-synapse.enable;
defaultText = lib.literalExpression ''
config.services.matrix-synapse.enable
'';
description = ''
Whether to add the bridge's app service registration file to
`services.matrix-synapse.settings.app_service_config_files`.
'';
};
};
config = lib.mkIf cfg.enable {
users.users.mautrix-whatsapp = {
isSystemUser = true;
group = "mautrix-whatsapp";
home = dataDir;
description = "Mautrix-Whatsapp bridge user";
};
users.groups.mautrix-whatsapp = { };
services.matrix-synapse = lib.mkIf cfg.registerToSynapse {
settings.app_service_config_files = [ registrationFile ];
};
systemd.services.matrix-synapse = lib.mkIf cfg.registerToSynapse {
serviceConfig.SupplementaryGroups = [ "mautrix-whatsapp" ];
};
# Note: this is defined here to avoid the docs depending on `config`
services.kabbone_mautrix-whatsapp.settings.homeserver = optOneOf (
with config.services;
[
(lib.mkIf matrix-synapse.enable (mkDefaults {
domain = matrix-synapse.settings.server_name;
}))
(lib.mkIf matrix-conduit.enable (mkDefaults {
domain = matrix-conduit.settings.global.server_name;
address = "http://localhost:${toString matrix-conduit.settings.global.port}";
}))
]
);
systemd.services.kabbone_mautrix-whatsapp = {
description = "mautrix-whatsapp, a Matrix-Whatsapp puppeting bridge.";
wantedBy = [ "multi-user.target" ];
wants = [ "network-online.target" ] ++ cfg.serviceDependencies;
after = [ "network-online.target" ] ++ cfg.serviceDependencies;
# ffmpeg is required for conversion of voice messages
path = [ pkgs.ffmpeg-headless ];
preStart = ''
# substitute the settings file by environment variables
# in this case read from EnvironmentFile
test -f '${settingsFile}' && rm -f '${settingsFile}'
old_umask=$(umask)
umask 0177
${pkgs.envsubst}/bin/envsubst \
-o '${settingsFile}' \
-i '${settingsFileUnsubstituted}'
umask $old_umask
# generate the appservice's registration file if absent
if [ ! -f '${registrationFile}' ]; then
${cfg.package}/bin/mautrix-whatsapp \
--generate-registration \
--config='${settingsFile}' \
--registration='${registrationFile}'
fi
chmod 640 ${registrationFile}
umask 0177
# 1. Overwrite registration tokens in config
# 2. If environment variable MAUTRIX_SIGNAL_BRIDGE_LOGIN_SHARED_SECRET
# is set, set it as the login shared secret value for the configured
# homeserver domain.
${pkgs.yq}/bin/yq -s '.[0].appservice.as_token = .[1].as_token
| .[0].appservice.hs_token = .[1].hs_token
| .[0]
| if env.MAUTRIX_WHATSAPP_BRIDGE_LOGIN_SHARED_SECRET then .double_puppet.secrets.[.homeserver.domain] = env.MAUTRIX_WHATSAPP_BRIDGE_LOGIN_SHARED_SECRET else . end' \
'${settingsFile}' '${registrationFile}' > '${settingsFile}.tmp'
mv '${settingsFile}.tmp' '${settingsFile}'
umask $old_umask
'';
serviceConfig = {
User = "mautrix-whatsapp";
Group = "mautrix-whatsapp";
EnvironmentFile = cfg.environmentFile;
StateDirectory = baseNameOf dataDir;
WorkingDirectory = dataDir;
ExecStart = ''
${cfg.package}/bin/mautrix-whatsapp \
--config='${settingsFile}' \
--registration='${registrationFile}'
'';
LockPersonality = true;
NoNewPrivileges = true;
PrivateDevices = true;
PrivateTmp = true;
PrivateUsers = true;
ProtectClock = true;
ProtectControlGroups = true;
ProtectHome = true;
ProtectHostname = true;
ProtectKernelLogs = true;
ProtectKernelModules = true;
ProtectKernelTunables = true;
ProtectSystem = "strict";
Restart = "on-failure";
RestartSec = "30s";
RestrictRealtime = true;
RestrictSUIDSGID = true;
SystemCallArchitectures = "native";
SystemCallErrorNumber = "EPERM";
SystemCallFilter = [ "@system-service" ];
Type = "simple";
UMask = 27;
};
restartTriggers = [ settingsFileUnsubstituted ];
};
};
meta = {
#buildDocsInSandbox = false;
#doc = ./mautrix-whatsapp.md;
maintainers = with lib.maintainers; [
kabbone
];
};
}

5
modules/programs/alacritty.nix
View File

@ -15,7 +15,6 @@
enable = true;
package = pkgs.alacritty;
settings = {
env.term = "screen-256color";
font = rec { # Font - Laptop has size manually changed at home.nix
#normal.family = "FiraCode Nerd Font";
normal.family = "Cascadia Code";
@ -23,6 +22,10 @@
#bold = { style = "Bold"; };
# size = 8;
};
offset = { # Positioning
x = -1;
y = 0;
};
};
};
};

2
modules/programs/default.nix
View File

@ -12,7 +12,7 @@
[
./alacritty.nix
# ./rofi.nix
./rofi.nix
./firefox.nix
#./waybar.nix
#./games.nix

2
modules/services/dmz/default.nix
View File

@ -12,7 +12,7 @@
[
./microvm.nix
# ./hydra.nix
./hydra.nix
]
# picom, polybar and sxhkd are pulled from desktop module

90
modules/services/dmz/hydra.nix
View File

@ -1,91 +1,11 @@
{ lib, config, pkgs, ... }:
{
services = {
hydra = {
enable = true;
hydraURL = "https://hydra.home.opel-online.de";
listenHost = "127.0.0.1";
notificationSender = "hydra@localhost";
useSubstitutes = true;
minimumDiskFree = 30;
};
nix-serve = {
enable = true;
port = 5001;
bindAddress = "127.0.0.1";
secretKeyFile = config.age.secrets."keys/nixsign".path;
};
nginx = {
enable = true;
recommendedProxySettings = true;
recommendedTlsSettings = true;
recommendedGzipSettings = true;
recommendedOptimisation = true;
virtualHosts = {
"home.opel-online.de" = {
enableACME = true;
forceSSL = true;
default = true;
locations."/".return = "503";
};
"hydra.home.opel-online.de" = {
useACMEHost = "home.opel-online.de";
forceSSL = true;
locations."/" = {
proxyPass = "http://localhost:3000";
extraConfig = ''
proxy_set_header X-Forwarded-Port 443;
'';
};
};
"cache.home.opel-online.de" = {
useACMEHost = "home.opel-online.de";
forceSSL = true;
locations."/".proxyPass = "http://${config.services.nix-serve.bindAddress}:${toString config.services.nix-serve.port}";
};
};
};
services.hydra = {
enable = true;
hydraURL = "http://localhost:3000";
notificationSender = "hydra@localhost";
useSubstitutes = true;
};
security.acme = {
acceptTerms = true;
defaults = {
email = "webmaster@opel-online.de";
#server = "https://acme-staging-v02.api.letsencrypt.org/directory";
dnsResolver = "9.9.9.9:53";
};
certs = {
"home.opel-online.de" = {
domain = "*.home.opel-online.de";
dnsProvider = "netcup";
environmentFile = config.age.secrets."services/acme/opel-online".path;
webroot = null;
};
};
};
nix = {
settings = {
trusted-users = [
"hydra"
];
allowed-uris = "http:// https://";
};
extraOptions = ''
secret-key-files = ${config.age.secrets."keys/nixsign".path}
'';
};
age.secrets."keys/nixsign" = {
file = ../../../secrets/keys/nixservepriv.age;
owner = "hydra";
};
age.secrets."services/acme/opel-online" = {
file = ../../../secrets/services/acme/opel-online.age;
owner = "acme";
};
}

2
modules/services/dmz/microvm.nix
View File

@ -103,7 +103,7 @@ in
id = "vm-${name}";
mac = "04:00:00:00:00:01";
macvtap = {
link = "ens18";
link = "enp6s18";
mode = "bridge";
};
} ];

19
modules/services/kabtopci/default.nix
View File

@ -1,19 +0,0 @@
#
# Services
#
# flake.nix
# ├─ ./hosts
# │ └─ home.nix
# └─ ./modules
# └─ ./services
# └─ default.nix *
# └─ ...
#
[
# ./microvm.nix
./hydra.nix
]
# picom, polybar and sxhkd are pulled from desktop module
# redshift temporarely disables

59
modules/services/kabtopci/gitea_runner.nix
View File

@ -1,59 +0,0 @@
{ lib, config, pkgs, ... }:
{
virtualisation = {
podman ={
enable = true;
autoPrune.enable = true;
dockerCompat = true;
};
containers.containersConf.settings = {
# podman seems to not work with systemd-resolved
containers.dns_servers = [ "8.8.8.8" "8.8.4.4" ];
};
};
services.gitea-actions-runner.instances = {
cirunner = {
enable = true;
url = "https://git.kabtop.de";
name = "CI Kabtop runner";
tokenFile = config.age.secrets."services/gitea/cirunner-token".path;
labels = [
"ci"
"debian-latest:docker://node:18-bullseye"
"ubuntu-latest:docker://node:16-bullseye"
"ubuntu-22.04:docker://node:16-bullseye"
"ubuntu-20.04:docker://node:16-bullseye"
"ubuntu-18.04:docker://node:16-buster"
"native:host"
];
hostPackages = with pkgs; [
bash
coreutils
curl
gawk
gitMinimal
gnused
nodejs
wget
];
settings = {
# container.options = "-e NIX_BUILD_SHELL=/bin/bash -e PAGER=cat -e PATH=/bin -e SSL_CERT_FILE=/etc/ssl/certs/ca-bundle.crt --device /dev/kvm -v /nix:/nix -v ${storeDeps}/bin:/bin -v ${storeDeps}/etc/ssl:/etc/ssl --user nixuser --device=/dev/kvm";
# the default network that also respects our dns server settings
container.network = "host";
container.privileged = false;
# container.valid_volumes = [
# "/nix"
# "${storeDeps}/bin"
# "${storeDeps}/etc/ssl"
# ];
};
};
};
age.secrets."services/gitea/cirunner-token" = {
file = ../../../secrets/services/gitea/cirunner-token.age;
owner = "gitea-runner";
};
}

82
modules/services/kabtopci/hydra.nix
View File

@ -1,82 +0,0 @@
{ lib, config, pkgs, ... }:
{
services = {
hydra = {
enable = true;
hydraURL = "https://hydra.ci.kabtop.de";
listenHost = "127.0.0.1";
notificationSender = "hydra@kabtop.de";
useSubstitutes = true;
minimumDiskFree = 8;
};
nix-serve = {
enable = true;
port = 5001;
bindAddress = "127.0.0.1";
secretKeyFile = config.age.secrets."keys/nixsign".path;
};
nginx = {
enable = true;
recommendedProxySettings = true;
recommendedTlsSettings = true;
recommendedGzipSettings = true;
recommendedOptimisation = true;
virtualHosts = {
"ci.kabtop.de" = {
enableACME = true;
forceSSL = true;
default = true;
locations."/".return = "503";
};
"hydra.ci.kabtop.de" = {
enableACME = true;
forceSSL = true;
locations."/" = {
proxyPass = "http://localhost:3000";
extraConfig = ''
proxy_set_header X-Forwarded-Port 443;
'';
};
};
"cache.ci.kabtop.de" = {
enableACME = true;
forceSSL = true;
locations."/".proxyPass = "http://${config.services.nix-serve.bindAddress}:${toString config.services.nix-serve.port}";
};
};
};
};
security.acme = {
acceptTerms = true;
defaults = {
email = "webmaster@kabtop.de";
webroot = "/var/lib/acme/acme-challenge";
#server = "https://acme-staging-v02.api.letsencrypt.org/directory";
};
};
nix = {
settings = {
trusted-users = [
"hydra"
];
allowed-uris = [
"github:"
"https://github.com/"
"git+ssh://github.com/"
];
};
extraOptions = ''
secret-key-files = ${config.age.secrets."keys/nixsign".path}
'';
};
age.secrets."keys/nixsign" = {
file = ../../../secrets/keys/nixservepriv.age;
owner = "hydra";
};
}

128
modules/services/kabtopci/microvm.nix
View File

@ -1,128 +0,0 @@
{ config, microvm, lib, pkgs, user, agenix, impermanence, ... }:
let
name = "gitea-runner";
in
{
microvm = {
autostart = [
name
];
vms = {
${name} = {
inherit pkgs;
config = {
imports =
[ agenix.nixosModules.default ] ++
[ impermanence.nixosModules.impermanence ] ++
[( ./gitea_runner.nix )];
networking = {
hostName = "${name}";
firewall = {
enable = true;
allowedUDPPorts = [ ];
allowedTCPPorts = [ ];
};
};
systemd.network = {
enable = true;
networks = {
"10-lan" = {
matchConfig.Name = "*";
networkConfig = {
DHCP = "yes";
IPv6AcceptRA = true;
};
};
};
};
users.users.${user} = { # System User
isNormalUser = true;
extraGroups = [ "wheel" ];
uid = 2000;
openssh.authorizedKeys.keys = [
"sk-ssh-ed25519@openssh.com AAAAGnNrLXNzaC1lZDI1NTE5QG9wZW5zc2guY29tAAAAIANmaraVJ/o20c4dqVnGLp/wGck9QNHFPvO9jcEbKS29AAAABHNzaDo= kabbone@kabc"
"sk-ssh-ed25519@openssh.com AAAAGnNrLXNzaC1lZDI1NTE5QG9wZW5zc2guY29tAAAAIIgo4IP8ISUohyAMiDc3zEe6ESUE3un7eN5FhVtxZHmcAAAABHNzaDo= kabbone@kabc"
"sk-ssh-ed25519@openssh.com AAAAGnNrLXNzaC1lZDI1NTE5QG9wZW5zc2guY29tAAAAIKVDApb3vZ+i97V4xLJh8rUF6z5OVYfORlXYbLhdQO15AAAABHNzaDo= kabbone@hades.home.opel-online.de"
"sk-ssh-ed25519@openssh.com AAAAGnNrLXNzaC1lZDI1NTE5QG9wZW5zc2guY29tAAAAIB0q++epdX7feQxvmC2m/CJEoJbkqtAJy6Ml6WKHxryZAAAABHNzaDo= kabbone@hades.home.opel-online.de"
];
};
services = {
openssh = {
enable = true;
settings.PasswordAuthentication = false;
hostKeys = [
{
path = "/persist/etc/ssh/ssh_host_ed25519_key";
type = "ed25519";
}
{
path = "/persist/etc/ssh/ssh_host_rsa_key";
type = "rsa";
bits = 4096;
}];
};
};
fileSystems."/persist".neededForBoot = lib.mkForce true;
environment = {
systemPackages = with pkgs; [ # Default packages install system-wide
bash
coreutils
curl
gawk
gitMinimal
gnused
nodejs
wget
];
persistence."/persist" = {
directories = [
"/var/log"
"/var/lib/private"
];
files = [
"/etc/machine-id"
];
};
};
microvm = {
hypervisor = "qemu";
vcpu = 4;
mem = 3096;
#kernel = pkgs.linuxKernel.packages.linux_latest;
interfaces = [
{
type = "user";
id = "vm-${name}";
mac = "04:00:00:00:00:02";
} ];
shares = [{
source = "/nix/store";
mountPoint = "/nix/.ro-store";
tag = "ro-store";
proto = "virtiofs";
}
{
source = "/etc/vm-persist/${name}";
mountPoint = "/persist";
tag = "persist";
proto = "virtiofs";
}];
#writableStoreOverlay = "/nix/.rw-store";
#storeOnDisk = true;
};
system.stateVersion = "23.05";
};
};
};
};
}

31
modules/services/kanshi.nix
View File

@ -7,34 +7,31 @@
{
services.kanshi = {
enable = true;
settings = [
{
profile = {
name = "undocked";
profiles = {
undocked = {
outputs = [
{ criteria = "eDP-1"; status = "enable"; mode = "1920x1080"; position = "0,0"; }
];
};
}
{
profile = {
name = "docked_c";
};
#docked_c = {
# outputs = [
# { criteria = "eDP-1"; status = "enable"; mode = "1920x1080"; position = "2560,0"; }
# { criteria = "DP-1"; status = "enable"; mode = "2560x1080"; position = "0,0"; }
# ];
#};
docked_c = {
outputs = [
{ criteria = "eDP-1"; status = "enable"; mode = "1920x1080"; position = "0,0"; scale = 1.5; }
{ criteria = "DP-1"; status = "enable"; mode = "2560x1080"; position = "1920,0"; }
];
};
}
{
profile = {
name = "docked_triple";
};
docked_triple = {
outputs = [
{ criteria = "eDP-1"; status = "disable"; mode = "1920x1080"; position = "4480,0"; }
{ criteria = "HDMI-A-1"; status = "enable"; mode = "1920x1080"; position = "0,0"; }
{ criteria = "DP-1"; status = "enable"; mode = "2560x1080"; position = "1920,0"; }
];
};
}
];
};
};
};
}

19
modules/services/kubemaster/default.nix
View File

@ -1,19 +0,0 @@
#
# Services
#
# flake.nix
# ├─ ./hosts
# │ └─ home.nix
# └─ ./modules
# └─ ./services
# └─ default.nix *
# └─ ...
#
[
# ./microvm.nix
# ./hydra.nix
]
# picom, polybar and sxhkd are pulled from desktop module
# redshift temporarely disables

2
modules/services/nas/default.nix
View File

@ -12,8 +12,6 @@
[
./nfs.nix
./nginx.nix
./vaultwarden.nix
]
# picom, polybar and sxhkd are pulled from desktop module

2
modules/services/nas/nfs.nix
View File

@ -11,7 +11,7 @@
};
# open the firewall
networking.firewall = {
interfaces.ens18 = {
interfaces.enp6s18 = {
allowedTCPPorts = [ 2049 ];
};
};

53
modules/services/nas/nginx.nix
View File

@ -1,53 +0,0 @@
#
# System notifications
#
{ config, lib, pkgs, ... }:
{
services.nginx = {
enable = true;
recommendedProxySettings = true;
recommendedTlsSettings = true;
recommendedGzipSettings = true;
recommendedOptimisation = true;
virtualHosts = {
"home.opel-online.de" = {
enableACME = true;
forceSSL = true;
default = true;
locations."/".return = "503";
};
};
};
security.acme = {
acceptTerms = true;
defaults = {
email = "webmaster@opel-online.de";
# server = "https://acme-staging-v02.api.letsencrypt.org/directory";
dnsResolver = "9.9.9.9:53";
};
certs = {
"home.opel-online.de" = {
domain = "*.home.opel-online.de";
dnsProvider = "netcup";
environmentFile = config.age.secrets."services/acme/opel-online".path;
webroot = null;
};
};
};
networking.firewall = {
enable = true;
allowedUDPPorts = [ ];
allowedTCPPorts = [ 80 443 ];
};
age.secrets."services/acme/opel-online" = {
file = ../../../secrets/services/acme/opel-online.age;
owner = "acme";
};
}

38
modules/services/nas/vaultwarden.nix
View File

@ -1,38 +0,0 @@
#
# System notifications
#
{ config, lib, pkgs, ... }:
{
services.vaultwarden = {
enable = true;
dbBackend = "sqlite";
backupDir = "/var/backup/vaultwarden";
environmentFile = config.age.secrets."services/vaultwarden/environment".path;
config = {
DOMAIN = "https://vault.home.opel-online.de";
SIGNUPS_ALLOWED = false;
ROCKET_ADDRESS = "127.0.0.1";
ROCKET_PORT = 8222;
ROCKET_LOG = "critical";
};
};
services.nginx = {
virtualHosts = {
"vault.home.opel-online.de" = {
useACMEHost = "home.opel-online.de";
forceSSL = true;
locations."/".proxyPass = "http://127.0.0.1:${toString config.services.vaultwarden.config.ROCKET_PORT}";
};
};
};
age.secrets."services/vaultwarden/environment" = {
file = ../../../secrets/services/vaultwarden/environment.age;
owner = "vaultwarden";
};
}

50
modules/services/printer/cfgs/CALIBRATION.cfg
View File

@ -1,50 +0,0 @@
[gcode_macro PID_TEST_BED]
gcode:
# Parameters
{% set TARGETTEMP = params.TEMP|default(70)|int %}
{% set max_x = printer.configfile.config["stepper_x"]["position_max"]|float %}
{% set max_y = printer.configfile.config["stepper_y"]["position_max"]|float %}
G28
G90
G1 X{max_x/2} Y{max_y/2} Z40 F6000
PID_CALIBRATE HEATER=heater_bed TARGET={TARGETTEMP}
[gcode_macro PID_TEST_HOTEND]
gcode:
# Parameters
{% set TARGETTEMP = params.TEMP|default(245)|int %}
{% set max_x = printer.configfile.config["stepper_x"]["position_max"]|float %}
{% set max_y = printer.configfile.config["stepper_y"]["position_max"]|float %}
G28
G90
G1 X{max_x/2} Y{max_y/2} Z10 F6000
M106 S64
PID_CALIBRATE HEATER=extruder TARGET={TARGETTEMP}
M107 ; Turn off print cooling fan
# TODO test this
[gcode_macro PID_TEST_ALL]
gcode:
PID_TEST_BED
PID_TEST_HOTEND
SAVE_CONFIG
[gcode_macro DO_PROBE_CALIBRATE]
gcode:
SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET=60
SET_HEATER_TEMPERATURE HEATER=extruder TARGET=180
TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM=60
TEMPERATURE_WAIT SENSOR=extruder MINIMUM=180
G28
PROBE_CALIBRATE
[gcode_macro DO_CREATE_MESH]
gcode:
SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET=60
SET_HEATER_TEMPERATURE HEATER=extruder TARGET=180
TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM=60
TEMPERATURE_WAIT SENSOR=extruder MINIMUM=180
G28
_BED_MESH_CALIBRATE

110
modules/services/printer/cfgs/MECHANICAL_GANTRY_CALIBRATION.cfg
View File

@ -1,110 +0,0 @@
###############################################################################
# Source https://github.com/strayr/strayr-k-macros/blob/e0807570a66d28735cf05143b105ab4ea6d9798f/mechanical_level_tmc2209.cfg
#
# Mechanical Gantry Calibration
#
# Requires TMC2209 drivers with UART control, some tuning and perhaps
# some printed endstops.
#
# Based on on (depricated) M915 and now alternate G34 from Marlin
# I beleive Prusa use this, certainly there's older videos advising to just
# ram the gantry at full current into the the z-max stops.
#
# It moves the gantry to the top of the travel, drops the current and then
# does a force move to force the steppers to stall against the physical end
# stops, transfering the level of the frame to the gantry.
#
# This is the only way to programatically level a multi-stepper single-driver
# gantry. It may also help with a dual-driver gantry on a bed-slinger design
# or where the plane of the bed is less trustworthy than the frame.
#
# It's particularly risky doing Z_TILT_ADJUST and SCREWS_TILT_CALCULATE
# without a mechanical reference as if one side of the gantry or bed is prone
# to droop, over time both bed and gantry will skew excessively but still read
# as level, so this can help transfer "level" from the frame to the gantry and
# then to the bed.
#
# I don't recommend doing this in a START_PRINT, I call this if a
# SCREWS_TILT_CALCULATE shows some drift, althoughon an Ender 3 type printer
# it's prudent to check the v-slot rollers for correct adjustment if drift is
# observed.
#
# It's probably best to run this and then do SCREWS_TILT_CALCULATE
# until the bed is really level. IF you have dual Z steppers you can then
# use Z_TILT_ADJUST for subsequent leveling of the gantry but make sure you
# use the same points for gantry level as you use in SCREWS_TILT_CALCULATE
#
# It may damage your printer if you do this at too high a current, or don't
# have proper endstops.
#
# HERE BE DRAGONS!
# YOU WERE WARNED!
#
# Here's a video of this in action
# https://www.youtube.com/watch?v=aVdIeIIpUAk
# and the endstops for 2020 v-slot
# https://www.thingiverse.com/thing:4848479
[gcode_macro MECHANICAL_GANTRY_CALIBRATION]
gcode:
### SET THIS DEFAULT CARFULLY - start really low
{% set my_current = params.CURRENT|default(0.20)|float %} ; adjust crash current on the fly :D
###
{% set oldcurrent = printer.configfile.settings["tmc2209 stepper_z"].run_current %}
{% set oldhold = printer.configfile.settings["tmc2209 stepper_z"].hold_current %}
{% set x_max = printer.toolhead.axis_maximum.x %}
{% set y_max = printer.toolhead.axis_maximum.y %}
{% set z_max = printer.toolhead.axis_maximum.z %}
{% set fast_move_z = printer.configfile.settings["printer"].max_z_velocity %}
{% set fast_move = printer.configfile.settings["printer"].max_velocity %}
M117 {printer.homed_axes}
{% if printer.homed_axes != 'xyz' %}
G28 ; Home All Axes
{% endif %}
G90 ; absolute
G0 X{x_max / 2} Y{y_max / 2} F{fast_move * 30 } ;put toolhead in the center of the gantry
G0 Z{z_max -5} F{fast_move_z * 60 } ; go to the Z-max - 5 at speed max z speed ; CHANGED
SET_TMC_CURRENT STEPPER=stepper_z CURRENT={my_current} ; drop current on Z stepper
{% if printer.configfile.settings["stepper_z1"] %} ; test for dual Z
SET_TMC_CURRENT STEPPER=stepper_z1 CURRENT={my_current} ; drop current
{% endif %}
CONDITIONAL_BEEP I=1
G4 P200 ; Probably not necessary, it is here just for sure
SET_KINEMATIC_POSITION Z={z_max - 25} ; Trick printer into beleiving the gantry is 25mm lower than it is ; CHANGED
G1 Z{z_max} F{6 * 60} ; based on above figures, there will be 20mm worth of grinding ; CHANGED
CONDITIONAL_BEEP I=2
G4 P10000 ; wait 10 seconds
G1 Z{z_max -6} F{6 * 60} ; move 4mm down
CONDITIONAL_BEEP I=3
G4 P200 ; same as the first one
SET_TMC_CURRENT STEPPER=stepper_z CURRENT={oldcurrent} HOLDCURRENT={oldhold}
{% if printer.configfile.settings["stepper_z1"] %} ; test for dual Z
SET_TMC_CURRENT STEPPER=stepper_z1 CURRENT={oldcurrent} HOLDCURRENT={oldhold} ; reset current
{% endif %}
G1 Z{z_max -30} F{6 * 60} ; move to 30mm below z-max to allow homing movement
G4 P200 ; same as the first one
G28 Z ; we MUST home again as the ganty is really in the wrong place.
[gcode_macro G34]
gcode:
MECHANICAL_GANTRY_CALIBRATION
[menu __main __setup __calib __mech_gantry_calibrate]
type: command
enable: {not printer.idle_timeout.state == "Printing"}
name: G34 Gantry Level
gcode:
G34
[force_move]
enable_force_move: true ; enable FORCE_MOVE and SET_KINEMATIC_POSITION

54
modules/services/printer/cfgs/PARKING.cfg
View File

@ -1,54 +0,0 @@
# Park front center
[gcode_macro PARKFRONT]
gcode:
{% if "xyz" not in printer.toolhead.homed_axes %}
G28 ; home if not already homed
{% endif %}
SAVE_GCODE_STATE NAME=PARKFRONT
G90 ; absolute positioning
G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_minimum.y+5} Z{printer.toolhead.axis_maximum.z/2} F6000
RESTORE_GCODE_STATE NAME=PARKFRONT
# Park front center, but low down.
[gcode_macro PARKFRONTLOW]
gcode:
{% if "xyz" not in printer.toolhead.homed_axes %}
G28 ; home if not already homed
{% endif %}
SAVE_GCODE_STATE NAME=PARKFRONT
G90 ; absolute positioning
G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_minimum.y+5} Z20 F6000
RESTORE_GCODE_STATE NAME=PARKFRONT
# Park top rear left
[gcode_macro PARKREAR]
gcode:
{% if "xyz" not in printer.toolhead.homed_axes %}
G28 ; home if not already homed
{% endif %}
SAVE_GCODE_STATE NAME=PARKREAR
G90 ; absolute positioning
G0 X{printer.toolhead.axis_minimum.x+10} Y{printer.toolhead.axis_maximum.y-10} Z{printer.toolhead.axis_maximum.z-50} F6000
RESTORE_GCODE_STATE NAME=PARKREAR
# Park at center of build volume
[gcode_macro PARKCENTER]
gcode:
{% if "xyz" not in printer.toolhead.homed_axes %}
G28 ; home if not already homed
{% endif %}
SAVE_GCODE_STATE NAME=PARKCENTER
G90 ; absolute positioning
G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_maximum.y/2} Z{printer.toolhead.axis_maximum.z/2} F6000
RESTORE_GCODE_STATE NAME=PARKCENTER
# Park 15mm above center of bed
[gcode_macro PARKBED]
gcode:
{% if "xyz" not in printer.toolhead.homed_axes %}
G28 ; home if not already homed
{% endif %}
SAVE_GCODE_STATE NAME=PARKBED
G90 ; absolute positioning
G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_maximum.y/2} Z15 F6000
RESTORE_GCODE_STATE NAME=PARKBED

124
modules/services/printer/cfgs/TEST_SPEED.cfg
View File

@ -1,124 +0,0 @@
[gcode_macro TEST_SPEED]
# Home, get position, throw around toolhead, home again.
# If MCU stepper positions (first line in GET_POSITION) are greater than a full step different (your number of microsteps), then skipping occured.
# We only measure to a full step to accomodate for endstop variance.
# Example: TEST_SPEED SPEED=300 ACCEL=5000 ITERATIONS=10
description: Test for max speed and acceleration parameters for the printer. Procedure: Home -> ReadPositionFromMCU -> MovesToolhead@Vel&Accel -> Home -> ReadPositionfromMCU
gcode:
# Speed
{% set speed = params.SPEED|default(printer.configfile.settings.printer.max_velocity)|int %}
# Iterations
{% set iterations = params.ITERATIONS|default(5)|int %}
# Acceleration
{% set accel = params.ACCEL|default(printer.configfile.settings.printer.max_accel)|int %}
# Minimum Cruise Ratio
{% set min_cruise_ratio = params.MIN_CRUISE_RATIO|default(0.5)|float %}
# Bounding inset for large pattern (helps prevent slamming the toolhead into the sides after small skips, and helps to account for machines with imperfectly set dimensions)
{% set bound = params.BOUND|default(20)|int %}
# Size for small pattern box
{% set smallpatternsize = SMALLPATTERNSIZE|default(20)|int %}
# Large pattern
# Max positions, inset by BOUND
{% set x_min = printer.toolhead.axis_minimum.x + bound %}
{% set x_max = printer.toolhead.axis_maximum.x - bound %}
{% set y_min = printer.toolhead.axis_minimum.y + bound %}
{% set y_max = printer.toolhead.axis_maximum.y - bound %}
# Small pattern at center
# Find X/Y center point
{% set x_center = (printer.toolhead.axis_minimum.x|float + printer.toolhead.axis_maximum.x|float ) / 2 %}
{% set y_center = (printer.toolhead.axis_minimum.y|float + printer.toolhead.axis_maximum.y|float ) / 2 %}
# Set small pattern box around center point
{% set x_center_min = x_center - (smallpatternsize/2) %}
{% set x_center_max = x_center + (smallpatternsize/2) %}
{% set y_center_min = y_center - (smallpatternsize/2) %}
{% set y_center_max = y_center + (smallpatternsize/2) %}
# Save current gcode state (absolute/relative, etc)
SAVE_GCODE_STATE NAME=TEST_SPEED
# Output parameters to g-code terminal
{ action_respond_info("TEST_SPEED: starting %d iterations at speed %d, accel %d" % (iterations, speed, accel)) }
# Home and get position for comparison later:
M400 # Finish moves - https://github.com/AndrewEllis93/Print-Tuning-Guide/issues/66
G28
# QGL if not already QGLd (only if QGL section exists in config)
{% if printer.configfile.settings.quad_gantry_level %}
{% if printer.quad_gantry_level.applied == False %}
QUAD_GANTRY_LEVEL
G28 Z
{% endif %}
{% endif %}
# Move 50mm away from max position and home again (to help with hall effect endstop accuracy - https://github.com/AndrewEllis93/Print-Tuning-Guide/issues/24)
G90
G1 X{printer.toolhead.axis_maximum.x-50} Y{printer.toolhead.axis_maximum.y-50} F{30*60}
M400 # Finish moves - https://github.com/AndrewEllis93/Print-Tuning-Guide/issues/66
G28 X Y
G0 X{printer.toolhead.axis_maximum.x-1} Y{printer.toolhead.axis_maximum.y-1} F{30*60}
G4 P1000
GET_POSITION
# Go to starting position
G0 X{x_min} Y{y_min} Z{bound + 10} F{speed*60}
# Set new limits
{% if printer.configfile.settings.printer.minimum_cruise_ratio is defined %}
SET_VELOCITY_LIMIT VELOCITY={speed} ACCEL={accel} MINIMUM_CRUISE_RATIO={min_cruise_ratio}
{% else %}
SET_VELOCITY_LIMIT VELOCITY={speed} ACCEL={accel} ACCEL_TO_DECEL={accel / 2}
{% endif %}
{% for i in range(iterations) %}
# Large pattern diagonals
G0 X{x_min} Y{y_min} F{speed*60}
G0 X{x_max} Y{y_max} F{speed*60}
G0 X{x_min} Y{y_min} F{speed*60}
G0 X{x_max} Y{y_min} F{speed*60}
G0 X{x_min} Y{y_max} F{speed*60}
G0 X{x_max} Y{y_min} F{speed*60}
# Large pattern box
G0 X{x_min} Y{y_min} F{speed*60}
G0 X{x_min} Y{y_max} F{speed*60}
G0 X{x_max} Y{y_max} F{speed*60}
G0 X{x_max} Y{y_min} F{speed*60}
# Small pattern diagonals
G0 X{x_center_min} Y{y_center_min} F{speed*60}
G0 X{x_center_max} Y{y_center_max} F{speed*60}
G0 X{x_center_min} Y{y_center_min} F{speed*60}
G0 X{x_center_max} Y{y_center_min} F{speed*60}
G0 X{x_center_min} Y{y_center_max} F{speed*60}
G0 X{x_center_max} Y{y_center_min} F{speed*60}
# Small pattern box
G0 X{x_center_min} Y{y_center_min} F{speed*60}
G0 X{x_center_min} Y{y_center_max} F{speed*60}
G0 X{x_center_max} Y{y_center_max} F{speed*60}
G0 X{x_center_max} Y{y_center_min} F{speed*60}
{% endfor %}
# Restore max speed/accel/accel_to_decel to their configured values
{% if printer.configfile.settings.printer.minimum_cruise_ratio is defined %}
SET_VELOCITY_LIMIT VELOCITY={printer.configfile.settings.printer.max_velocity} ACCEL={printer.configfile.settings.printer.max_accel} MINIMUM_CRUISE_RATIO={printer.configfile.settings.printer.minimum_cruise_ratio}
{% else %}
SET_VELOCITY_LIMIT VELOCITY={printer.configfile.settings.printer.max_velocity} ACCEL={printer.configfile.settings.printer.max_accel} ACCEL_TO_DECEL={printer.configfile.settings.printer.max_accel_to_decel}
{% endif %}
# Re-home and get position again for comparison:
M400 # Finish moves - https://github.com/AndrewEllis93/Print-Tuning-Guide/issues/66
G28 # This is a full G28 to fix an issue with CoreXZ - https://github.com/AndrewEllis93/Print-Tuning-Guide/issues/12
# Go to XY home positions (in case your homing override leaves it elsewhere)
G90
G0 X{printer.toolhead.axis_maximum.x-1} Y{printer.toolhead.axis_maximum.y-1} F{30*60}
G4 P1000
GET_POSITION
# Restore previous gcode state (absolute/relative, etc)
RESTORE_GCODE_STATE NAME=TEST_SPEED

13
modules/services/printer/cfgs/adxl-direct.cfg
View File

@ -1,13 +0,0 @@
# Documentation https://www.klipper3d.org/Measuring_Resonances.html?h=adxl#configure-adxl345-with-rpi
# Documentation https://www.klipper3d.org/RPi_microcontroller.html
[mcu rpi]
serial: /tmp/klipper_host_mcu
[adxl345]
cs_pin: rpi:None
[resonance_tester]
accel_chip: adxl345
probe_points: 111.5, 111.5, 20
max_smoothing: 0.13

29
modules/services/printer/cfgs/adxl-rp2040.cfg
View File

@ -1,29 +0,0 @@
#####################################################################
# Find my instructions here:
# https://github.com/bassamanator/rp2040-zero-adxl345-klipper
# ADXL345 related Settings
# https://www.klipper3d.org/Measuring_Resonances.html#adxl345
#####################################################################
[mcu RP2040]
baud: 115200 # 250000
restart_method: command
# Obtain definition by "ls -l /dev/serial/by-id/"
serial: /dev/serial/by-id/usb-Klipper_rp2040_E6614C311B773B36-if00
[adxl345]
cs_pin: RP2040:gpio1
spi_bus: spi0a
axes_map: x,z,y
[resonance_tester]
accel_chip: adxl345
probe_points: 111.5, 111.5, 20
[output_pin power_mode] # Improve power stability
pin: RP2040:gpio23
[gcode_macro ADX]
description: Shortcut to ACCELEROMETER_QUERY
gcode:
ACCELEROMETER_QUERY

43
modules/services/printer/cfgs/adxl-rpi-pico-2x.cfg
View File

@ -1,43 +0,0 @@
#####################################################################
# Config that supports a print head and a bed sensor at the same time
# This requires a Raspberry Pi Pico.
# Instructions: https://klipper.discourse.group/t/raspberry-pi-pico-adxl345-portable-resonance-measurement/1757/9
# TLDR Instructions: The two sensors should use the spi0a (GPIO 0-3) and spi1a (GPIO 9-12) buses, respectively.
#
# Recommended mounts:
# https://www.printables.com/model/385334-sovol-sv06-adxl345-mount-printhead-and-bed
#
# ADXL345 related Settings
# https://www.klipper3d.org/Measuring_Resonances.html#adxl345
#####################################################################
[mcu RP2040]
baud: 115200
restart_method: command
# Obtain definition by "ls -l /dev/serial/by-id/"
serial: /dev/serial/by-id/usb-Klipper_rp2040_E66138935F154C28-if00
[adxl345 head]
cs_pin: RP2040:gpio1
spi_bus: spi0a
# update axes_map if your sensor is oriented differently. Note the print on your sensor.
# -y, -z, x means that
# - the x axis of your printer corresponds to the sensor's negative y axis
# - the y axis of your printer corresponds to the sensor's negative z axis
# - the z axis of your printer corresponds to the sensor's x axis
axes_map: -y, -z, x
[adxl345 bed]
cs_pin: RP2040:gpio9
spi_bus: spi1a
[resonance_tester]
accel_chip_x: adxl345 head
accel_chip_y: adxl345 bed
probe_points: 111.5, 111.5, 20
[gcode_macro ADX]
description: Shortcut to ACCELEROMETER_QUERY for both sensors
gcode:
ACCELEROMETER_QUERY CHIP=head
ACCELEROMETER_QUERY CHIP=bed

120
modules/services/printer/cfgs/kamp/Adaptive_Meshing.cfg
View File

@ -1,120 +0,0 @@
# # # Klipper Adaptive Meshing # # #
# Heads up! If you have any other BED_MESH_CALIBRATE macros defined elsewhere in your config, you will need to comment out / remove them for this to work. (Klicky/Euclid Probe)
# You will also need to be sure that [exclude_object] is defined in printer.cfg, and your slicer is labeling objects.
# This macro will parse information from objects in your gcode to define a min and max mesh area to probe, creating an adaptive mesh!
# This macro will not increase probe_count values in your [bed_mesh] config. If you want richer meshes, be sure to increase probe_count. We recommend at least 5,5.
[gcode_macro BED_MESH_CALIBRATE]
rename_existing: _BED_MESH_CALIBRATE
gcode:
{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %} # Gather all object points
{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %} # Get bed mesh min from printer.cfg
{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %} # Get bed mesh max from printer.cfg
{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %} # Get probe count from printer.cfg
{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %} # Pull variables from _KAMP_Settings
{% set verbose_enable = kamp_settings.verbose_enable | abs %} # Pull verbose setting from _KAMP_Settings
{% set probe_dock_enable = kamp_settings.probe_dock_enable | abs %} # Pull probe dockable probe settings from _KAMP_Settings
{% set attach_macro = kamp_settings.attach_macro | string %} # Pull attach probe command from _KAMP_Settings
{% set detach_macro = kamp_settings.detach_macro | string %} # Pull detach probe command from _KAMP_Settings
{% set mesh_margin = kamp_settings.mesh_margin | float %} # Pull mesh margin setting from _KAMP_Settings
{% set fuzz_amount = kamp_settings.fuzz_amount | float %} # Pull fuzz amount setting from _KAMP_Settings
{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2 %} # If probe count is only a single number, convert it to 2. E.g. probe_count:7 = 7,7
{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1) %} # Determine max probe point distance
{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1) %} # Determine max probe point distance
{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %} # Set x_min from smallest object x point
{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %} # Set y_min from smallest object y point
{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %} # Set x_max from largest object x point
{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %} # Set y_max from largest object y point
{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %} # Set fuzz_range between 0 and fuzz_amount
{% set adapted_x_min = x_min - mesh_margin - (fuzz_range | random / 100.0) %} # Adapt x_min to margin and fuzz constraints
{% set adapted_y_min = y_min - mesh_margin - (fuzz_range | random / 100.0) %} # Adapt y_min to margin and fuzz constraints
{% set adapted_x_max = x_max + mesh_margin + (fuzz_range | random / 100.0) %} # Adapt x_max to margin and fuzz constraints
{% set adapted_y_max = y_max + mesh_margin + (fuzz_range | random / 100.0) %} # Adapt y_max to margin and fuzz constraints
{% set adapted_x_min = [adapted_x_min , bed_mesh_min[0]] | max %} # Compare adjustments to defaults and choose max
{% set adapted_y_min = [adapted_y_min , bed_mesh_min[1]] | max %} # Compare adjustments to defaults and choose max
{% set adapted_x_max = [adapted_x_max , bed_mesh_max[0]] | min %} # Compare adjustments to defaults and choose min
{% set adapted_y_max = [adapted_y_max , bed_mesh_max[1]] | min %} # Compare adjustments to defaults and choose min
{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %} # Define probe_count's x point count and round up
{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %} # Define probe_count's y point count and round up
{% if (([points_x, points_y]|max) > 6) %} #
{% set algorithm = "bicubic" %} #
{% set min_points = 4 %} #
{% else %} # Calculate if algorithm should be bicubic or lagrange
{% set algorithm = "lagrange" %} #
{% set min_points = 3 %} #
{% endif %} #
{% set points_x = [points_x , min_points]|max %} # Set probe_count's x points to fit the calculated algorithm
{% set points_y = [points_y , min_points]|max %} # Set probe_count's y points to fit the calculated algorithm
{% set points_x = [points_x , probe_count[0]]|min %}
{% set points_y = [points_y , probe_count[1]]|min %}
{% if verbose_enable == True %} # If verbose is enabled, print information about KAMP's calculations
{% if printer.exclude_object.objects != [] %}
{ action_respond_info( "Algorithm: {}.".format(
(algorithm),
)) }
{ action_respond_info("Default probe count: {},{}.".format(
(probe_count[0]),
(probe_count[1]),
)) }
{ action_respond_info("Adapted probe count: {},{}.".format(
(points_x),
(points_y),
)) }
{action_respond_info("Default mesh bounds: {}, {}.".format(
(bed_mesh_min[0],bed_mesh_min[1]),
(bed_mesh_max[0],bed_mesh_max[1]),
)) }
{% if mesh_margin > 0 %}
{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
(mesh_margin),
(mesh_margin),
)) }
{% else %}
{action_respond_info("Mesh margin is 0, margin not increased.")}
{% endif %}
{% if fuzz_amount > 0 %}
{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
(fuzz_amount),
)) }
{% else %}
{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
{% endif %}
{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
(adapted_x_min, adapted_y_min),
(adapted_x_max, adapted_y_max),
)) }
{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
{% else %}
{action_respond_info("No objects detected! Check your gcode and make sure that EXCLUDE_OBJECT_DEFINE is happening before BED_MESH_CALIBRATE is called. Defaulting to regular meshing.")}
G4 P5000 # Wait 5 seconds to make error more visible
{% endif %}
{% endif %}
{% if probe_dock_enable == True %}
{attach_macro} # Attach/deploy a probe if the probe is stored somewhere outside of the print area
{% endif %}
_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
{% if probe_dock_enable == True %}
{detach_macro} # Detach/stow a probe if the probe is stored somewhere outside of the print area
{% endif %} # End of verbose

37
modules/services/printer/cfgs/kamp/KAMP_Settings.cfg
View File

@ -1,37 +0,0 @@
# Below you can include specific configuration files depending on what you want KAMP to do:
# NOTE bassamanator: uncomment the functionality that you want to use from KAMP
[include ./Adaptive_Meshing.cfg] # Include to enable adaptive meshing configuration.
[include ./Line_Purge.cfg] # Include to enable adaptive line purging configuration.
# [include ./Voron_Purge.cfg] # Include to enable adaptive Voron logo purging configuration.
# [include ./Smart_Park.cfg] # Include to enable the Smart Park function, which parks the printhead near the print area for final heating.
[gcode_macro _KAMP_Settings]
description: This macro contains all adjustable settings for KAMP
# The following variables are settings for KAMP as a whole.
variable_verbose_enable: True # Set to True to enable KAMP information output when running. This is useful for debugging.
# The following variables are for adjusting adaptive mesh settings for KAMP.
variable_mesh_margin: 0 # Expands the mesh size in millimeters if desired. Leave at 0 to disable.
variable_fuzz_amount: 0 # Slightly randomizes mesh points to spread out wear from nozzle-based probes. Leave at 0 to disable.
# The following variables are for those with a dockable probe like Klicky, Euclid, etc. # ---------------- Attach Macro | Detach Macro
variable_probe_dock_enable: False # Set to True to enable the usage of a dockable probe. # ---------------------------------------------
variable_attach_macro: 'Attach_Probe' # The macro that is used to attach the probe. # Klicky Probe: 'Attach_Probe' | 'Dock_Probe'
variable_detach_macro: 'Dock_Probe' # The macro that is used to store the probe. # Euclid Probe: 'Deploy_Probe' | 'Stow_Probe'
# Legacy Gcode: 'M401' | 'M402'
# The following variables are for adjusting adaptive purge settings for KAMP.
variable_purge_height: 0.8 # Z position of nozzle during purge, default is 0.8.
variable_tip_distance: 0 # Distance between tip of filament and nozzle before purge. Should be similar to PRINT_END final retract amount.
variable_purge_margin: 10 # Distance the purge will be in front of the print area, default is 10.
variable_purge_amount: 30 # Amount of filament to be purged prior to printing.
variable_flow_rate: 12 # Flow rate of purge in mm3/s. Default is 12.
# The following variables are for adjusting the Smart Park feature for KAMP, which will park the printhead near the print area at a specified height.
variable_smart_park_height: 10 # Z position for Smart Park, default is 10.
gcode: # Gcode section left intentionally blank. Do not disturb.
{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

119
modules/services/printer/cfgs/kamp/Line_Purge.cfg
View File

@ -1,119 +0,0 @@
[gcode_macro LINE_PURGE]
description: A purge macro that adapts to be near your actual printed objects
gcode:
# Get relevant printer params
{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
# Use firmware retraction if it is defined
{% if printer.firmware_retraction is defined %}
{% set RETRACT = G10 | string %}
{% set UNRETRACT = G11 | string %}
{% else %}
{% set RETRACT = 'G1 E-.5 F2100' | string %}
{% set UNRETRACT = 'G1 E.5 F2100' | string %}
{% endif %}
# Get purge settings from _Kamp_Settings
{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
{% set purge_height = printer["gcode_macro _KAMP_Settings"].purge_height | float %}
{% set tip_distance = printer["gcode_macro _KAMP_Settings"].tip_distance | float %}
{% set purge_margin = printer["gcode_macro _KAMP_Settings"].purge_margin | float %}
{% set purge_amount = printer["gcode_macro _KAMP_Settings"].purge_amount | float %}
{% set flow_rate = printer["gcode_macro _KAMP_Settings"].flow_rate | float %}
# Calculate purge origins and centers from objects
{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %} # Get all object points
{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %} # Object x min
{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %} # Object x max
{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %} # Object y min
{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %} # Object y max
{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %} # Create center point of purge line relative to print on X axis
{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %} # Create center point of purge line relative to print on Y axis
{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %} # Add margin to x min, compare to 0, and choose the larger
{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %} # Add margin to y min, compare to 0, and choose the larger
# Calculate purge speed
{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
{% if cross_section < 5 %}
{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}
{% else %}
{% if verbose_enable == True %}
{action_respond_info("Moving filament tip {}mms".format(
(tip_distance),
)) }
{% endif %}
{% if printer.firmware_retraction is defined %}
{action_respond_info("KAMP purge is using firmware retraction.")}
{% else %}
{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
{% endif %}
{% if purge_y_origin > 0 %}
{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
(purge_x_center),
(purge_y_origin),
(purge_amount),
(flow_rate),
)) }
{% else %}
{action_respond_info("KAMP purge starting at {}, {} and purging {}mm of filament, requested flow rate is {}mm/s3.".format(
(purge_x_origin),
(purge_y_center),
(purge_amount),
(flow_rate),
)) }
{% endif %}
SAVE_GCODE_STATE NAME=Prepurge_State # Create gcode state
{% if purge_y_origin > 0 %} # If there's room on Y, purge along X axis in front of print area
G92 E0 # Reset extruder
G0 F{travel_speed} # Set travel speed
G90 # Absolute positioning
G0 X{purge_x_center} Y{purge_y_origin} # Move to purge position
G0 Z{purge_height} # Move to purge Z height
M83 # Relative extrusion mode
G1 E{tip_distance} F{purge_move_speed} # Move filament tip
G1 X{purge_x_center + purge_amount} E{purge_amount} F{purge_move_speed} # Purge line
{RETRACT} # Retract
G0 X{purge_x_center + purge_amount + 10} F{travel_speed} # Rapid move to break string
G92 E0 # Reset extruder distance
M82 # Absolute extrusion mode
G0 Z{purge_height * 2} F{travel_speed} # Z hop
{% else %} # If there's room on X, purge along Y axis to the left of print area
G92 E0 # Reset extruder
G0 F{travel_speed} # Set travel speed
G90 # Absolute positioning
G0 X{purge_x_origin} Y{purge_y_center} # Move to purge position
G0 Z{purge_height} # Move to purge Z height
M83 # Relative extrusion mode
G1 E{tip_distance} F{purge_move_speed} # Move filament tip
G1 Y{purge_y_center + purge_amount} E{purge_amount} F{purge_move_speed} # Purge line
{RETRACT} # Retract
G0 Y{purge_y_center + purge_amount + 10} F{travel_speed} # Rapid move to break string
G92 E0 # Reset extruder distance
M82 # Absolute extrusion mode
G0 Z{purge_height * 2} F{travel_speed} # Z hop
{% endif %}
RESTORE_GCODE_STATE NAME=Prepurge_State # Restore gcode state
{% endif %}

38
modules/services/printer/cfgs/kamp/Smart_Park.cfg
View File

@ -1,38 +0,0 @@
[gcode_macro SMART_PARK]
description: Parks your printhead near the print area for pre-print hotend heating.
gcode:
{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %} # Pull all variables from _KAMP_Settings
{% set z_height = kamp_settings.smart_park_height | float %} # Set Z height variable
{% set purge_margin = kamp_settings.purge_margin | float %} # Set purge margin variable
{% set verbose_enable = kamp_settings.verbose_enable | abs %} # Set verbosity
{% set center_x = printer.toolhead.axis_maximum.x / 2 | float %} # Create center point of x for fallback
{% set center_y = printer.toolhead.axis_maximum.y / 2 | float %} # Create center point of y for fallback
{% set axis_minimum_x = printer.toolhead.axis_minimum.x | float %}
{% set axis_minimum_y = printer.toolhead.axis_minimum.y | float %}
{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %} # Gather all object points
{% set x_min = all_points | map(attribute=0) | min | default(center_x) %} # Set x_min from smallest object x point
{% set y_min = all_points | map(attribute=1) | min | default(center_y) %} # Set y_min from smallest object y point
{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %} # Set travel speed from config
{% if purge_margin > 0 and x_min != center_x and y_min != center_y %} # If objects are detected and purge margin
{% set x_min = [ x_min - purge_margin , x_min ] | min %} # value is greater than 0, move
{% set y_min = [ y_min - purge_margin , y_min ] | min %} # to purge location + margin
{% set x_min = [ x_min , axis_minimum_x ] | max %}
{% set y_min = [ y_min , axis_minimum_y ] | max %}
{% endif %}
{% if verbose_enable == True %} # Verbose park location
{ action_respond_info("Smart Park location: {},{}.".format(
(x_min),
(y_min),
)) }
{% endif %}
{% if printer.toolhead.position.z < z_height %}
G0 Z{z_height} # Move Z to park height if current Z position is lower than z_height
{% endif %}
G0 X{x_min} Y{y_min} F{travel_speed} # Move near object area
G0 Z{z_height} # Move Z to park height

91
modules/services/printer/cfgs/kamp/Voron_Purge.cfg
View File

@ -1,91 +0,0 @@
[gcode_macro VORON_PURGE]
description: A purge macro that adapts to be near your actual printed objects
gcode:
# Get relevant printer params
{% set travel_speed = (printer.toolhead.max_velocity) * 60 | float %}
{% set cross_section = printer.configfile.settings.extruder.max_extrude_cross_section | float %}
# Use firmware retraction if it is defined
{% if printer.firmware_retraction is defined %}
{% set RETRACT = G10 | string %}
{% set UNRETRACT = G11 | string %}
{% else %}
{% set RETRACT = 'G1 E-.5 F2100' | string %}
{% set UNRETRACT = 'G1 E.5 F2100' | string %}
{% endif %}
# Get purge settings from _Kamp_Settings
{% set kamp_settings = printer["gcode_macro _KAMP_Settings"] %}
{% set verbose_enable = kamp_settings.verbose_enable | abs %}
{% set purge_height = kamp_settings.purge_height | float %}
{% set tip_distance = kamp_settings.tip_distance | float %}
{% set purge_margin = kamp_settings.purge_margin | float %}
{% set purge_amount = kamp_settings.purge_amount | float %}
{% set flow_rate = kamp_settings.flow_rate | float %}
{% set size = 10 | float %}
# Calculate purge origins and centers from objects
{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %} # Get all object points
{% set purge_x_min = (all_points | map(attribute=0) | min | default(0)) %} # Object x min
{% set purge_x_max = (all_points | map(attribute=0) | max | default(0)) %} # Object x max
{% set purge_y_min = (all_points | map(attribute=1) | min | default(0)) %} # Object y min
{% set purge_y_max = (all_points | map(attribute=1) | max | default(0)) %} # Object y max
{% set purge_x_center = ([((purge_x_max + purge_x_min) / 2) - (purge_amount / 2), 0] | max) %} # Create center point of purge line relative to print on X axis
{% set purge_y_center = ([((purge_y_max + purge_y_min) / 2) - (purge_amount / 2), 0] | max) %} # Create center point of purge line relative to print on Y axis
{% set purge_x_origin = ([purge_x_min - purge_margin, 0] | max) %} # Add margin to x min, compare to 0, and choose the larger
{% set purge_y_origin = ([purge_y_min - purge_margin, 0] | max) %} # Add margin to y min, compare to 0, and choose the larger
# Calculate purge speed
{% set purge_move_speed = (flow_rate / 5.0) * 60 | float %}
{% if cross_section < 5 %}
{action_respond_info("[Extruder] max_extrude_cross_section is insufficient for purge, please set it to 5 or greater. Purge skipped.")}
{% else %}
{% if verbose_enable == True %}
{action_respond_info("Moving filament tip {}mms".format(
(tip_distance),
)) }
{% endif %}
{% if printer.firmware_retraction is defined %}
{action_respond_info("KAMP purge is using firmware retraction.")}
{% else %}
{action_respond_info("KAMP purge is not using firmware retraction, it is recommended to configure it.")}
{% endif %}
SAVE_GCODE_STATE NAME=Prepurge_State # Create gcode state
G92 E0 # Reset extruder
G0 F{travel_speed} # Set travel speed
G90 # Absolute positioning
G0 X{purge_x_origin} Y{purge_y_origin+size/2} # Move to purge position
G0 Z{purge_height} # Move to purge Z height
M83 # Relative extrusion mode
G1 E{tip_distance} F{purge_move_speed} # Move tip of filament to nozzle
G1 X{purge_x_origin+size*0.289} Y{purge_y_origin+size} E{purge_amount/4} F{purge_move_speed} # Purge first line of logo
{RETRACT} # Retract
G0 Z{purge_height*2} # Z hop
G0 X{purge_x_origin+size*0.789} Y{purge_y_origin+size} # Move to second purge line origin
G0 Z{purge_height} # Move to purge Z height
{UNRETRACT} # Recover
G1 X{purge_x_origin+size*0.211} Y{purge_y_origin} E{purge_amount/2} F{purge_move_speed} # Purge second line of logo
{RETRACT} # Retract
G0 Z{purge_height*2} # Z hop
G0 X{purge_x_origin+size*0.711} Y{purge_y_origin} # Move to third purge line origin
G0 Z{purge_height} # Move to purge Z height
{UNRETRACT} # Recover
G1 X{purge_x_origin+size} Y{purge_y_origin+size/2} E{purge_amount/4} F{purge_move_speed} # Purge third line of logo
{RETRACT} # Retract
G92 E0 # Reset extruder distance
M82 # Absolute extrusion mode
G0 Z{purge_height*2} F{travel_speed} # Z hop
RESTORE_GCODE_STATE NAME=Prepurge_State # Restore gcode state
{% endif %}

330
modules/services/printer/cfgs/misc-macros.cfg
View File

@ -1,330 +0,0 @@
[force_move]
enable_force_move: True
# NOTE If you're using a Raspberry Pi, you can uncomment the next 2 lines, optionally.
#[temperature_sensor raspberry_pi]
#sensor_type: temperature_host
# NOTE If you're using a an Orange Pi, you can uncomment the next 3 lines, optionally.
# [temperature_sensor Orange_Pi]
# sensor_type: temperature_host
# sensor_path: /sys/class/thermal/thermal_zone0/temp
[virtual_sdcard]
path: /var/lib/moonraker/gcodes
# NOTE Cancel objects feature is enabled. If you're using a low powered device, comment out [exclude_object].
# Also see [file_manager] section in moonraker.conf.
[exclude_object]
[pause_resume]
[display_status]
[delayed_gcode DISABLEFILAMENTSENSOR]
initial_duration: 1
gcode:
SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
[gcode_macro _globals]
variable_filament_sensor_enabled: 1 # NOTE Enable(1) or disable(0) the filament sensor, if one is connected
variable_beeping_enabled: 1 # NOTE Enable(1) or disable(0) beeping everywhere except during gantry calibration
variable_bed_temp_over: 10 # NOTE Start print if bed temperature is over by this amount, otherwise wait for temperature drop
variable_kamp_enable: 1 # NOTE Enable(1) or disable(0) KAMP (adaptive mesh)
variable_pre_purge_prime_length: 1.40
gcode:
# Don't delete this section
[gcode_macro CONDITIONAL_BEEP]
gcode:
# Parameters
{% set i = params.I|default(1)|int %} ; Iterations (number of times to beep).
{% set dur = params.DUR|default(100)|int %} ; Duration/wait of each beep in ms. Default 100ms.
{% set freq = params.FREQ|default(2000)|int %} ; Frequency in Hz. Default 2kHz.
{% set BEEPING_ENABLED=printer["gcode_macro _globals"].beeping_enabled|default(-1)|int %}
{% if BEEPING_ENABLED == 1 %}
BEEP I={i} DUR={dur} FREQ={freq}
{% endif %}
[gcode_macro ADJUST_FILAMENT_SENSOR_STATUS]
gcode:
# Parameters
{% set NEWSTATUS = params.ENABLE|default(-1)|int %}
{% set FILAMENT_SENSOR_ENABLED=printer["gcode_macro _globals"].filament_sensor_enabled|default(-1)|int %}
{% if FILAMENT_SENSOR_ENABLED == 1 and NEWSTATUS != -1 %}
SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE={NEWSTATUS}
{% endif %}
[gcode_macro M109]
rename_existing: M99109
gcode:
#Parameters
{% set s = params.S|float %}
M104 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %} ; Set hotend temp
{% if s != 0 %}
TEMPERATURE_WAIT SENSOR=extruder MINIMUM={s} MAXIMUM={s+1} ; Wait for hotend temp (within 1 degree)
{% endif %}
[gcode_macro M190]
rename_existing: M99190
gcode:
#Parameters
{% set s = params.S|float %}
M140 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %} ; Set bed temp
{% if s != 0 %}
TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM={s} MAXIMUM={s+1} ; Wait for bed temp (within 1 degree)
{% endif %}
[gcode_macro PURGE_LINE]
gcode:
{% set PRE_PURGE_PRIME_LENGTH=printer["gcode_macro _globals"].pre_purge_prime_length|default(1.40)|float %}
ADJUST_FILAMENT_SENSOR_STATUS ENABLE=1
# Misc variables
{% set extrudeAmount = 26.6 %}
{% set movementLength = 100.0 %}
{% set movementSpeed = 15 * 60 %}
{% set xStart = 0.5 %}
{% set yStart = 0.5 %}
# Set safe speeds
{% set maxVelocity = printer.configfile.settings.printer.max_velocity|default(200)|int %}
{% set maxVelocityAdjusted = (0.95 * maxVelocity * 60)|int %}
G92 E0.0 ; reset extruder
G90 ; Absolute positioning
G0 X{xStart} Y{yStart} F{maxVelocityAdjusted} ; move to purge position
G1 Z0.4 F500.0 ; move to purge height
M83 ; Relative extrusion mode
G1 E{PRE_PURGE_PRIME_LENGTH} F500 ; pre-purge prime LENGTH SHOULD MATCH YOUR PRINT_END RETRACT
G1 X{xStart + movementLength} E{extrudeAmount} F{movementSpeed} ; intro line 1
G92 E0.0 ; reset extruder
M82 ; Absolute extrusion mode
G1 Z5.0 ; move nozzle to prevent scratch
[gcode_macro CANCEL_PRINT]
rename_existing: BASE_CANCEL_PRINT
gcode:
SET_IDLE_TIMEOUT TIMEOUT={printer.configfile.settings.idle_timeout.timeout} ; set timeout back to configured value
CLEAR_PAUSE
SDCARD_RESET_FILE
PRINT_END
BASE_CANCEL_PRINT
[gcode_macro PRINT_START]
gcode:
ADJUST_FILAMENT_SENSOR_STATUS ENABLE=1
# Parameters
{% set bedtemp = params.BED|int %}
{% set hotendtemp = params.HOTEND|int %}
{% set chambertemp = params.CHAMBER|default(0)|int %}
# Other variables
{% set bedtempSlicer = bedtemp %}
{% set bedtempOver = printer["gcode_macro _globals"].bed_temp_over|default(0)|int %}
{% set maxVelocity = printer.configfile.settings.printer.max_velocity|default(200)|int %}
{% set maxVelocityAdjusted = (0.90 * maxVelocity * 60)|int %}
{% set kampEnabled=printer["gcode_macro _globals"].kamp_enable|default(0)|int %}
{% if printer.configfile.settings.safe_z_home %}
{% set startX = printer.configfile.settings.safe_z_home.home_xy_position[0]|float %}
{% set startY = printer.configfile.settings.safe_z_home.home_xy_position[1]|float %}
{% endif %}
{% set bedtempAlmost = ((bedtemp - 2, 0, printer.heater_bed.temperature|int)|max, bedtemp)|max %}
{% set hotendtempStepOne = ((hotendtemp, printer[printer.toolhead.extruder].temperature|int)|min, 150)|max %}
{% set hotendtempStepTwo = ((hotendtemp, printer[printer.toolhead.extruder].temperature|int)|min, 170)|max %}
# If bed-temp-almost is higher than bed-temp by a maximum of bed-temp-over
{% if bedtempAlmost > bedtemp %}
{% if (bedtempAlmost - bedtempOver) <= bedtemp %}
{% set bedtemp = bedtempAlmost %}
{% endif %}
{% endif %}
G90 ; absolute positioning
M140 S{bedtempAlmost} ; set & don't wait for bed temp
M104 S{hotendtempStepOne} ; set & don't wait for hotend temp
G28 X Y
{% if printer.configfile.settings.safe_z_home %}
G1 X{startX} Y{startY} F{maxVelocityAdjusted}
{% endif %}
M190 S{bedtempAlmost} ; set & wait for bed temp
{% if kampEnabled == 0 %}
M104 S{hotendtempStepTwo} ; set & don't wait for hotend temp
{% endif %}
M190 S{bedtemp} ; set & wait for bed temp
M140 S{bedtempSlicer} ; set & don't wait for bed temp ; set temp to sliced setting regardless
{% if kampEnabled == 0 %}
BED_MESH_PROFILE LOAD=default ; NOTE if not using a mesh, comment out this line
SKEW_PROFILE LOAD=CaliFlower
M104 S{hotendtemp} ; set & don't wait for hotend temp
G28 Z ; final z homing
{% else %}
G28 Z ; final z homing
BED_MESH_CALIBRATE ; KAMP mesh
M104 S{hotendtemp} ; set & don't wait for hotend temp
{% endif %}
G1 X0 Y0 F{maxVelocityAdjusted}
M109 S{hotendtemp} ; set & wait for hotend temp
G1 Z20 F3000 ; move nozzle away from bed
[gcode_macro PRINT_END]
gcode:
SET_SKEW CLEAR=1
ADJUST_FILAMENT_SENSOR_STATUS ENABLE=0
CONDITIONAL_BEEP I=2 DUR=30 FREQ=8500
{% set PRE_PURGE_PRIME_LENGTH=printer["gcode_macro _globals"].pre_purge_prime_length|default(1.40)|float %}
M400 ; wait for buffer to clear
G92 E0 ; zero the extruder
G1 E-{PRE_PURGE_PRIME_LENGTH} F400 ; retract filament
G91 ; relative positioning
# Set safe speeds
{% set zVelocity = printer.configfile.settings.printer.max_z_velocity|default(15)|int %}
{% set maxVelocity = printer.configfile.settings.printer.max_velocity|default(200)|int %}
{% set zVelocityAdjusted = (0.95 * zVelocity * 60)|int %}
{% set maxVelocityAdjusted = (0.95 * maxVelocity * 60)|int %}
# Get Boundaries
{% set max_x = printer.configfile.config["stepper_x"]["position_max"]|float %}
{% set max_y = printer.configfile.config["stepper_y"]["position_max"]|float %}
{% set max_z = printer.configfile.config["stepper_z"]["position_max"]|float %}
# Check end position to determine safe direction to move
{% if printer.toolhead.position.x < (max_x - 20) %}
{% set x_safe = 20.0 %}
{% else %}
{% set x_safe = -20.0 %}
{% endif %}
{% if printer.toolhead.position.y < (max_y - 20) %}
{% set y_safe = 20.0 %}
{% else %}
{% set y_safe = -20.0 %}
{% endif %}
{% set lift_height = 25.0 %}
{% if printer.toolhead.position.z < (max_z - lift_height) %}
{% set z_safe = lift_height %}
{% else %}
{% set z_safe = max_z - printer.toolhead.position.z %}
{% endif %}
G0 Z{z_safe} F{zVelocityAdjusted} ; move nozzle up
G0 X{x_safe} Y{y_safe} F{maxVelocityAdjusted} ; move nozzle to remove stringing
TURN_OFF_HEATERS
M107 ; turn off fan
G90 ; absolute positioning
G0 X60 Y{max_y} F3600 ; park nozzle at rear
M84
[gcode_macro LOAD_FILAMENT]
gcode:
M83 ; set extruder to relative
G1 E30 F300 ; load
G1 E15 F150 ; prime nozzle with filament
M82 ; set extruder to absolute
[gcode_macro UNLOAD_FILAMENT]
gcode:
M83 ; set extruder to relative
G1 E10 F300 ; extrude a little to soften tip
G1 E-40 F1800 ; retract some, but not too much or it will jam
M82 ; set extruder to absolute
[gcode_macro M600]
gcode:
CONDITIONAL_BEEP i=1 dur=300
CONDITIONAL_BEEP i=1 dur=100
CONDITIONAL_BEEP i=1 dur=100
PAUSE ; Pause
[gcode_macro PAUSE]
rename_existing: BASE_PAUSE
gcode:
# Parameters
{% set z = params.Z|default(10)|int %} ; z hop amount
{% if printer['pause_resume'].is_paused|int == 0 %}
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=zhop VALUE={z} ; set z hop variable for reference in resume macro
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=etemp VALUE={printer['extruder'].target} ; set hotend temp variable for reference in resume macro
ADJUST_FILAMENT_SENSOR_STATUS ENABLE=0
SAVE_GCODE_STATE NAME=PAUSE ; save current print position for resume
BASE_PAUSE ; pause print
{% if (printer.gcode_move.position.z + z) < printer.toolhead.axis_maximum.z %} ; check that zhop doesn't exceed z max
G91 ; relative positioning
G1 Z{z} F900 ; raise Z up by z hop amount
{% else %}
{ action_respond_info("Pause zhop exceeds maximum Z height.") } ; if z max is exceeded, show message and set zhop value for resume to 0
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=zhop VALUE=0
{% endif %}
G90 ; absolute positioning
G1 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_minimum.y+5} F6000 ; park toolhead at front center
SAVE_GCODE_STATE NAME=PAUSEPARK ; save parked position in case toolhead is moved during the pause (otherwise the return zhop can error)
M104 S0 ; turn off hotend
SET_IDLE_TIMEOUT TIMEOUT=43200 ; set timeout to 12 hours
{% endif %}
[gcode_macro RESUME]
rename_existing: BASE_RESUME
variable_zhop: 0
variable_etemp: 0
gcode:
# Parameters
{% set e = params.E|default(2.5)|int %} ; hotend prime amount (in mm)
{% if printer['pause_resume'].is_paused|int == 1 %}
ADJUST_FILAMENT_SENSOR_STATUS ENABLE=1
SET_IDLE_TIMEOUT TIMEOUT={printer.configfile.settings.idle_timeout.timeout} ; set timeout back to configured value
{% if etemp > 0 %}
M109 S{etemp|int} ; wait for hotend to heat back up
{% endif %}
RESTORE_GCODE_STATE NAME=PAUSEPARK MOVE=1 MOVE_SPEED=100 ; go back to parked position in case toolhead was moved during pause (otherwise the return zhop can error)
G91 ; relative positioning
M83 ; relative extruder positioning
{% if printer[printer.toolhead.extruder].temperature >= printer.configfile.settings.extruder.min_extrude_temp %}
G1 Z{zhop * -1} E{e} F900 ; prime nozzle by E, lower Z back down
{% else %}
G1 Z{zhop * -1} F900 ; lower Z back down without priming (just in case we are testing the macro with cold hotend)
{% endif %}
RESTORE_GCODE_STATE NAME=PAUSE MOVE=1 MOVE_SPEED=60 ; restore position
BASE_RESUME ; resume print
{% endif %}
[gcode_macro _CG28]
# Conditional homing
gcode:
{% if "xyz" not in printer.toolhead.homed_axes %}
G28
{% endif %}
[gcode_macro BEEP]
description: BEEP I=3 DUR=200 FREQ=2000: Beep 3 times, for 200ms each, at 2kHz frequency.
gcode:
# Parameters
{% set i = params.I|default(1)|int %} ; Iterations (number of times to beep).
{% set dur = params.DUR|default(100)|int %} ; Duration/wait of each beep in ms. Default 100ms.
{% set freq = params.FREQ|default(2000)|int %} ; Frequency in Hz. Default 2kHz.
{% for iteration in range(i|int) %}
SET_PIN PIN=beeper VALUE=0.8 CYCLE_TIME={ 1.0/freq if freq > 0 else 1 }
G4 P{dur}
SET_PIN PIN=beeper VALUE=0
G4 P{dur}
{% endfor %}

18
modules/services/printer/default.nix
View File

@ -1,18 +0,0 @@
#
# Services
#
# flake.nix
# ├─ ./hosts
# │ └─ home.nix
# └─ ./modules
# └─ ./services
# └─ default.nix *
# └─ ...
#
[
./klipper.nix
]
# picom, polybar and sxhkd are pulled from desktop module
# redshift temporarely disables

110
modules/services/printer/firmware.conf
View File

@ -1,110 +0,0 @@
CONFIG_LOW_LEVEL_OPTIONS=y
# CONFIG_MACH_AVR is not set
# CONFIG_MACH_ATSAM is not set
# CONFIG_MACH_ATSAMD is not set
# CONFIG_MACH_LPC176X is not set
CONFIG_MACH_STM32=y
# CONFIG_MACH_HC32F460 is not set
# CONFIG_MACH_RP2040 is not set
# CONFIG_MACH_PRU is not set
# CONFIG_MACH_AR100 is not set
# CONFIG_MACH_LINUX is not set
# CONFIG_MACH_SIMU is not set
CONFIG_BOARD_DIRECTORY="stm32"
CONFIG_MCU="stm32f103xe"
CONFIG_CLOCK_FREQ=72000000
CONFIG_SERIAL=y
CONFIG_FLASH_SIZE=0x10000
CONFIG_FLASH_BOOT_ADDRESS=0x8000000
CONFIG_RAM_START=0x20000000
CONFIG_RAM_SIZE=0x5000
CONFIG_STACK_SIZE=512
CONFIG_FLASH_APPLICATION_ADDRESS=0x8007000
CONFIG_STM32_SELECT=y
CONFIG_MACH_STM32F103=y
# CONFIG_MACH_STM32F207 is not set
# CONFIG_MACH_STM32F401 is not set
# CONFIG_MACH_STM32F405 is not set
# CONFIG_MACH_STM32F407 is not set
# CONFIG_MACH_STM32F429 is not set
# CONFIG_MACH_STM32F446 is not set
# CONFIG_MACH_STM32F765 is not set
# CONFIG_MACH_STM32F031 is not set
# CONFIG_MACH_STM32F042 is not set
# CONFIG_MACH_STM32F070 is not set
# CONFIG_MACH_STM32F072 is not set
# CONFIG_MACH_STM32G070 is not set
# CONFIG_MACH_STM32G071 is not set
# CONFIG_MACH_STM32G0B0 is not set
# CONFIG_MACH_STM32G0B1 is not set
# CONFIG_MACH_STM32G431 is not set
# CONFIG_MACH_STM32G474 is not set
# CONFIG_MACH_STM32H723 is not set
# CONFIG_MACH_STM32H743 is not set
# CONFIG_MACH_STM32H750 is not set
# CONFIG_MACH_STM32L412 is not set
# CONFIG_MACH_N32G452 is not set
# CONFIG_MACH_N32G455 is not set
# CONFIG_MACH_STM32F103x6 is not set
CONFIG_MACH_STM32F1=y
CONFIG_HAVE_STM32_USBFS=y
CONFIG_HAVE_STM32_CANBUS=y
CONFIG_STM32F103GD_DISABLE_SWD=y
CONFIG_STM32_DFU_ROM_ADDRESS=0
# CONFIG_STM32_FLASH_START_2000 is not set
# CONFIG_STM32_FLASH_START_5000 is not set
CONFIG_STM32_FLASH_START_7000=y
# CONFIG_STM32_FLASH_START_8000 is not set
# CONFIG_STM32_FLASH_START_8800 is not set
# CONFIG_STM32_FLASH_START_9000 is not set
# CONFIG_STM32_FLASH_START_10000 is not set
# CONFIG_STM32_FLASH_START_800 is not set
# CONFIG_STM32_FLASH_START_1000 is not set
# CONFIG_STM32_FLASH_START_4000 is not set
# CONFIG_STM32_FLASH_START_0000 is not set
CONFIG_STM32_CLOCK_REF_8M=y
# CONFIG_STM32_CLOCK_REF_12M is not set
# CONFIG_STM32_CLOCK_REF_16M is not set
# CONFIG_STM32_CLOCK_REF_20M is not set
# CONFIG_STM32_CLOCK_REF_24M is not set
# CONFIG_STM32_CLOCK_REF_25M is not set
# CONFIG_STM32_CLOCK_REF_INTERNAL is not set
CONFIG_CLOCK_REF_FREQ=8000000
CONFIG_STM32F0_TRIM=16
# CONFIG_STM32_USB_PA11_PA12 is not set
CONFIG_STM32_SERIAL_USART1=y
# CONFIG_STM32_SERIAL_USART1_ALT_PB7_PB6 is not set
# CONFIG_STM32_SERIAL_USART2 is not set
# CONFIG_STM32_SERIAL_USART2_ALT_PD6_PD5 is not set
# CONFIG_STM32_SERIAL_USART3 is not set
# CONFIG_STM32_SERIAL_USART3_ALT_PD9_PD8 is not set
# CONFIG_STM32_CANBUS_PA11_PA12 is not set
# CONFIG_STM32_CANBUS_PA11_PB9 is not set
# CONFIG_STM32_MMENU_CANBUS_PB8_PB9 is not set
# CONFIG_STM32_MMENU_CANBUS_PD0_PD1 is not set
CONFIG_SERIAL_BAUD=250000
CONFIG_USB_VENDOR_ID=0x1d50
CONFIG_USB_DEVICE_ID=0x614e
CONFIG_USB_SERIAL_NUMBER="12345"
CONFIG_WANT_GPIO_BITBANGING=y
CONFIG_WANT_DISPLAYS=y
CONFIG_WANT_SENSORS=y
CONFIG_WANT_LIS2DW=y
CONFIG_WANT_LDC1612=y
CONFIG_WANT_HX71X=y
CONFIG_WANT_ADS1220=y
CONFIG_WANT_SOFTWARE_I2C=y
CONFIG_WANT_SOFTWARE_SPI=y
CONFIG_NEED_SENSOR_BULK=y
CONFIG_CANBUS_FREQUENCY=1000000
CONFIG_INITIAL_PINS=""
CONFIG_HAVE_GPIO=y
CONFIG_HAVE_GPIO_ADC=y
CONFIG_HAVE_GPIO_SPI=y
CONFIG_HAVE_GPIO_I2C=y
CONFIG_HAVE_GPIO_HARD_PWM=y
CONFIG_HAVE_STRICT_TIMING=y
CONFIG_HAVE_CHIPID=y
CONFIG_HAVE_STEPPER_BOTH_EDGE=y
CONFIG_HAVE_BOOTLOADER_REQUEST=y
CONFIG_INLINE_STEPPER_HACK=y

101
modules/services/printer/klipper.nix
View File

@ -1,101 +0,0 @@
{ lib, config, pkgs, ... }:
{
environment = {
systemPackages = with pkgs; [
klipperscreen
];
};
services = {
klipper = {
enable = true;
user = "moonraker";
group = "moonraker";
configFile = ./printer.cfg;
mutableConfig = true;
configDir = "/var/lib/moonraker/config";
firmwares."sovol06" = {
serial = "/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0";
enableKlipperFlash = true;
enable = true;
configFile = ./firmware.conf;
};
};
mainsail = {
enable = true;
nginx = {
enableACME = false;
#useACMEHost = "home.opel-online.de";
serverName = "nbf5.home.opel-online.de";
#onlySSL = true;
#listenAddresses = [ "0.0.0.0" "::" ];
#forceSSL = true;
};
};
moonraker = {
enable = true;
allowSystemControl = true;
address = "0.0.0.0";
settings = {
authorization = {
force_logins = true;
cors_domains = [
"*://nbf5.home.opel-online.de"
"*.local"
];
trusted_clients = [
"127.0.0.0/8"
"192.168.2.0/24"
];
};
file_manager = {
enable_object_processing = true;
};
};
};
# nginx = {
# enable = true;
# recommendedProxySettings = true;
# recommendedTlsSettings = true;
# recommendedGzipSettings = true;
# recommendedOptimisation = true;
# virtualHosts = {
# "ci.kabtop.de" = {
# enableACME = true;
# forceSSL = true;
# default = true;
# locations."/".return = "503";
# };
# "hydra.ci.kabtop.de" = {
# enableACME = true;
# forceSSL = true;
# locations."/" = {
# proxyPass = "http://localhost:3000";
# extraConfig = ''
# proxy_set_header X-Forwarded-Port 443;
# '';
# };
# };
# "cache.ci.kabtop.de" = {
# enableACME = true;
# forceSSL = true;
# locations."/".proxyPass = "http://${config.services.nix-serve.bindAddress}:${toString config.services.nix-serve.port}";
# };
# };
# };
# };
#
# security.acme = {
# acceptTerms = true;
# defaults = {
# email = "webmaster@kabtop.de";
# webroot = "/var/lib/acme/acme-challenge";
# #server = "https://acme-staging-v02.api.letsencrypt.org/directory";
# };
};
}

313
modules/services/printer/mainsail.cfg
View File

@ -1,313 +0,0 @@
## Client klipper macro definitions
##
## Copyright (C) 2022 Alex Zellner <alexander.zellner@googlemail.com>
##
## This file may be distributed under the terms of the GNU GPLv3 license
##
## !!! This file is read-only. Maybe the used editor indicates that. !!!
##
## Customization:
## 1) copy the gcode_macro _CLIENT_VARIABLE (see below) to your printer.cfg
## 2) remove the comment mark (#) from all lines
## 3) change any value in there to your needs
##
## Use the PAUSE macro direct in your M600:
## e.g. with a different park position front left and a minimal height of 50
## [gcode_macro M600]
## description: Filament change
## gcode: PAUSE X=10 Y=10 Z_MIN=50
## Z_MIN will park the toolhead at a minimum of 50 mm above to bed to make it easier for you to swap filament.
##
## Client variable macro for your printer.cfg
#[gcode_macro _CLIENT_VARIABLE]
#variable_use_custom_pos : False ; use custom park coordinates for x,y [True/False]
#variable_custom_park_x : 0.0 ; custom x position; value must be within your defined min and max of X
#variable_custom_park_y : 0.0 ; custom y position; value must be within your defined min and max of Y
#variable_custom_park_dz : 2.0 ; custom dz value; the value in mm to lift the nozzle when move to park position
#variable_retract : 1.0 ; the value to retract while PAUSE
#variable_cancel_retract : 5.0 ; the value to retract while CANCEL_PRINT
#variable_speed_retract : 35.0 ; retract speed in mm/s
#variable_unretract : 1.0 ; the value to unretract while RESUME
#variable_speed_unretract : 35.0 ; unretract speed in mm/s
#variable_speed_hop : 15.0 ; z move speed in mm/s
#variable_speed_move : 100.0 ; move speed in mm/s
#variable_park_at_cancel : False ; allow to move the toolhead to park while execute CANCEL_PRINT [True/False]
#variable_park_at_cancel_x : None ; different park position during CANCEL_PRINT [None/Position as Float]; park_at_cancel must be True
#variable_park_at_cancel_y : None ; different park position during CANCEL_PRINT [None/Position as Float]; park_at_cancel must be True
## !!! Caution [firmware_retraction] must be defined in the printer.cfg if you set use_fw_retract: True !!!
#variable_use_fw_retract : False ; use fw_retraction instead of the manual version [True/False]
#variable_idle_timeout : 0 ; time in sec until idle_timeout kicks in. Value 0 means that no value will be set or restored
#variable_runout_sensor : "" ; If a sensor is defined, it will be used to cancel the execution of RESUME in case no filament is detected.
## Specify the config name of the runout sensor e.g "filament_switch_sensor runout". Hint use the same as in your printer.cfg
## !!! Custom macros, please use with care and review the section of the corresponding macro.
## These macros are for simple operations like setting a status LED. Please make sure your macro does not interfere with the basic macro functions.
## Only single line commands are supported, please create a macro if you need more than one command.
#variable_user_pause_macro : "" ; Everything inside the "" will be executed after the klipper base pause (PAUSE_BASE) function
#variable_user_resume_macro: "" ; Everything inside the "" will be executed before the klipper base resume (RESUME_BASE) function
#variable_user_cancel_macro: "" ; Everything inside the "" will be executed before the klipper base cancel (CANCEL_PRINT_BASE) function
#gcode:
[virtual_sdcard]
path: ~/printer_data/gcodes
on_error_gcode: CANCEL_PRINT
[pause_resume]
#recover_velocity: 50.
# When capture/restore is enabled, the speed at which to return to
# the captured position (in mm/s). Default is 50.0 mm/s.
[display_status]
[respond]
[gcode_macro CANCEL_PRINT]
description: Cancel the actual running print
rename_existing: CANCEL_PRINT_BASE
gcode:
##### get user parameters or use default #####
{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
{% set allow_park = client.park_at_cancel|default(false)|lower == 'true' %}
{% set retract = client.cancel_retract|default(5.0)|abs %}
##### define park position #####
{% set park_x = "" if (client.park_at_cancel_x|default(none) is none)
else "X=" ~ client.park_at_cancel_x %}
{% set park_y = "" if (client.park_at_cancel_y|default(none) is none)
else "Y=" ~ client.park_at_cancel_y %}
{% set custom_park = park_x|length > 0 or park_y|length > 0 %}
##### end of definitions #####
# restore idle_timeout time if needed
{% if printer['gcode_macro RESUME'].restore_idle_timeout > 0 %}
SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro RESUME'].restore_idle_timeout}
{% endif %}
{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
_CLIENT_RETRACT LENGTH={retract}
TURN_OFF_HEATERS
M106 S0
{client.user_cancel_macro|default("")}
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
# clear pause_next_layer and pause_at_layer as preparation for next print
SET_PAUSE_NEXT_LAYER ENABLE=0
SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
CANCEL_PRINT_BASE
[gcode_macro PAUSE]
description: Pause the actual running print
rename_existing: PAUSE_BASE
gcode:
##### get user parameters or use default #####
{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
{% set idle_timeout = client.idle_timeout|default(0) %}
{% set temp = printer[printer.toolhead.extruder].target if printer.toolhead.extruder != '' else 0 %}
{% set restore = False if printer.toolhead.extruder == ''
else True if params.RESTORE|default(1)|int == 1 else False %}
##### end of definitions #####
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{{'restore': restore, 'temp': temp}}"
# set a new idle_timeout value
{% if idle_timeout > 0 %}
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
{% endif %}
PAUSE_BASE
{client.user_pause_macro|default("")}
_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}
[gcode_macro RESUME]
description: Resume the actual running print
rename_existing: RESUME_BASE
variable_last_extruder_temp: {'restore': False, 'temp': 0}
variable_restore_idle_timeout: 0
variable_idle_state: False
gcode:
##### get user parameters or use default #####
{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
{% set sp_move = client.speed_move|default(velocity) %}
{% set runout_resume = True if client.runout_sensor|default("") == "" # no runout
else True if not printer[client.runout_sensor].enabled # sensor is disabled
else printer[client.runout_sensor].filament_detected %} # sensor status
{% set can_extrude = True if printer.toolhead.extruder == '' # no extruder defined in config
else printer[printer.toolhead.extruder].can_extrude %} # status of active extruder
{% set do_resume = False %}
{% set prompt_txt = [] %}
##### end of definitions #####
#### Printer comming from timeout idle state ####
{% if printer.idle_timeout.state|upper == "IDLE" or idle_state %}
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
{% if last_extruder_temp.restore %}
# we need to use the unicode (\u00B0) for the ° as py2 env's would throw an error otherwise
RESPOND TYPE=echo MSG='{"Restoring \"%s\" temperature to %3.1f\u00B0C, this may take some time" % (printer.toolhead.extruder, last_extruder_temp.temp) }'
M109 S{last_extruder_temp.temp}
{% set do_resume = True %}
{% elif can_extrude %}
{% set do_resume = True %}
{% else %}
RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
{% endif %}
#### Printer comming out of regular PAUSE state ####
{% elif can_extrude %}
{% set do_resume = True %}
{% else %}
RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
{% endif %}
{% if runout_resume %}
{% if do_resume %}
{% if restore_idle_timeout > 0 %} SET_IDLE_TIMEOUT TIMEOUT={restore_idle_timeout} {% endif %} # restore idle_timeout time
{client.user_resume_macro|default("")}
_CLIENT_EXTRUDE
RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}
{% endif %}
{% else %}
RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]}'
{% set _d = prompt_txt.append("\"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]) %}
{% endif %}
##### Generate User Information box in case of abort #####
{% if not (runout_resume and do_resume) %}
RESPOND TYPE=command MSG="action:prompt_begin RESUME aborted !!!"
{% for element in prompt_txt %}
RESPOND TYPE=command MSG='{"action:prompt_text %s" % element}'
{% endfor %}
RESPOND TYPE=command MSG="action:prompt_footer_button Ok|RESPOND TYPE=command MSG=action:prompt_end|info"
RESPOND TYPE=command MSG="action:prompt_show"
{% endif %}
# Usage: SET_PAUSE_NEXT_LAYER [ENABLE=[0|1]] [MACRO=<name>]
[gcode_macro SET_PAUSE_NEXT_LAYER]
description: Enable a pause if the next layer is reached
gcode:
{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
{% set ENABLE = params.ENABLE|default(1)|int != 0 %}
{% set MACRO = params.MACRO|default(pause_next_layer.call, True) %}
SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"
# Usage: SET_PAUSE_AT_LAYER [ENABLE=[0|1]] [LAYER=<number>] [MACRO=<name>]
[gcode_macro SET_PAUSE_AT_LAYER]
description: Enable/disable a pause if a given layer number is reached
gcode:
{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
{% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined
else params.LAYER is defined %}
{% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %}
{% set MACRO = params.MACRO|default(pause_at_layer.call, True) %}
SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"
# Usage: SET_PRINT_STATS_INFO [TOTAL_LAYER=<total_layer_count>] [CURRENT_LAYER= <current_layer>]
[gcode_macro SET_PRINT_STATS_INFO]
rename_existing: SET_PRINT_STATS_INFO_BASE
description: Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer: { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer : { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode:
{% if pause_next_layer.enable %}
RESPOND TYPE=echo MSG='{"%s, forced by pause_next_layer" % pause_next_layer.call}'
{pause_next_layer.call} ; execute the given gcode to pause, should be either M600 or PAUSE
SET_PAUSE_NEXT_LAYER ENABLE=0
{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
RESPOND TYPE=echo MSG='{"%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer)}'
{pause_at_layer.call} ; execute the given gcode to pause, should be either M600 or PAUSE
SET_PAUSE_AT_LAYER ENABLE=0
{% endif %}
SET_PRINT_STATS_INFO_BASE {rawparams}
##### internal use #####
[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description: Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode:
##### get user parameters or use default #####
{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
{% set use_custom = client.use_custom_pos|default(false)|lower == 'true' %}
{% set custom_park_x = client.custom_park_x|default(0.0) %}
{% set custom_park_y = client.custom_park_y|default(0.0) %}
{% set park_dz = client.custom_park_dz|default(2.0)|abs %}
{% set sp_hop = client.speed_hop|default(15) * 60 %}
{% set sp_move = client.speed_move|default(velocity) * 60 %}
##### get config and toolhead values #####
{% set origin = printer.gcode_move.homing_origin %}
{% set act = printer.gcode_move.gcode_position %}
{% set max = printer.toolhead.axis_maximum %}
{% set cone = printer.toolhead.cone_start_z|default(max.z) %} ; height as long the toolhead can reach max and min of an delta
{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
else False %}
##### define park position #####
{% set z_min = params.Z_MIN|default(0)|float %}
{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
{% set x_park = params.X if params.X is defined
else custom_park_x if use_custom
else 0.0 if round_bed
else (max.x - 5.0) %}
{% set y_park = params.Y if params.Y is defined
else custom_park_y if use_custom
else (max.y - 5.0) if round_bed and z_park < cone
else 0.0 if round_bed
else (max.y - 5.0) %}
##### end of definitions #####
_CLIENT_RETRACT
{% if "xyz" in printer.toolhead.homed_axes %}
G90
G1 Z{z_park} F{sp_hop}
G1 X{x_park} Y{y_park} F{sp_move}
{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
{% else %}
RESPOND TYPE=echo MSG='Printer not homed'
{% endif %}
[gcode_macro _CLIENT_EXTRUDE]
description: Extrudes, if the extruder is hot enough
gcode:
##### get user parameters or use default #####
{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
{% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %}
{% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %}
{% set speed = params.SPEED|default(client.speed_unretract)|default(35) %}
{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
##### end of definitions #####
{% if printer.toolhead.extruder != '' %}
{% if printer[printer.toolhead.extruder].can_extrude %}
{% if use_fw_retract %}
{% if length < 0 %}
G10
{% else %}
G11
{% endif %}
{% else %}
M83
G1 E{length} F{(speed|float|abs) * 60}
{% if absolute_extrude %}
M82
{% endif %}
{% endif %}
{% else %}
RESPOND TYPE=echo MSG='{"\"%s\" not hot enough" % printer.toolhead.extruder}'
{% endif %}
{% endif %}
[gcode_macro _CLIENT_RETRACT]
description: Retracts, if the extruder is hot enough
gcode:
{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
{% set length = params.LENGTH|default(client.retract)|default(1.0)|float %}
{% set speed = params.SPEED|default(client.speed_retract)|default(35) %}
_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
[gcode_macro _CLIENT_LINEAR_MOVE]
description: Linear move with save and restore of the gcode state
gcode:
{% set x_move = "X" ~ params.X if params.X is defined else "" %}
{% set y_move = "Y" ~ params.Y if params.Y is defined else "" %}
{% set z_move = "Z" ~ params.Z if params.Z is defined else "" %}
{% set e_move = "E" ~ params.E if params.E is defined else "" %}
{% set rate = "F" ~ params.F if params.F is defined else "" %}
{% set ABSOLUTE = params.ABSOLUTE | default(0) | int != 0 %}
{% set ABSOLUTE_E = params.ABSOLUTE_E | default(0) | int != 0 %}
SAVE_GCODE_STATE NAME=_client_movement
{% if x_move or y_move or z_move %}
G9{ 0 if ABSOLUTE else 1 }
{% endif %}
{% if e_move %}
M8{ 2 if ABSOLUTE_E else 3 }
{% endif %}
G1 { x_move } { y_move } { z_move } { e_move } { rate }
RESTORE_GCODE_STATE NAME=_client_movement

53
modules/services/printer/nginx.nix
View File

@ -1,53 +0,0 @@
#
# System notifications
#
{ config, lib, pkgs, ... }:
{
services.nginx = {
enable = true;
recommendedProxySettings = true;
recommendedTlsSettings = true;
recommendedGzipSettings = true;
recommendedOptimisation = true;
virtualHosts = {
"home.opel-online.de" = {
enableACME = true;
forceSSL = true;
default = true;
locations."/".return = "503";
};
};
};
security.acme = {
acceptTerms = true;
defaults = {
email = "webmaster@opel-online.de";
# server = "https://acme-staging-v02.api.letsencrypt.org/directory";
dnsResolver = "9.9.9.9:53";
};
certs = {
"home.opel-online.de" = {
domain = "*.home.opel-online.de";
dnsProvider = "netcup";
environmentFile = config.age.secrets."services/acme/opel-online".path;
webroot = null;
};
};
};
networking.firewall = {
enable = true;
allowedUDPPorts = [ ];
allowedTCPPorts = [ 80 443 ];
};
age.secrets."services/acme/opel-online" = {
file = ../../../secrets/services/acme/opel-online.age;
owner = "acme";
};
}

11
modules/services/printer/osskc.cfg
View File

@ -1,11 +0,0 @@
[include ./cfgs/misc-macros.cfg]
[include ./cfgs/PARKING.cfg]
[include ./cfgs/MECHANICAL_GANTRY_CALIBRATION.cfg]
[include ./cfgs/CALIBRATION.cfg]
[include ./cfgs/kamp/KAMP_Settings.cfg]
[include ./cfgs/TEST_SPEED.cfg]
# NOTE Uncomment the ONE of the following lines if you're using an adxl345
# [include ./cfgs/adxl-rp2040.cfg]
# [include ./cfgs/adxl-rpi-pico-2x.cfg]
# [include ./cfgs/adxl-direct.cfg]

284
modules/services/printer/printer.cfg
View File

@ -1,284 +0,0 @@
# This file contains pin mappings for the stock Sovol SV06.
#
# Find installation instructions at https://github.com/bassamanator/Sovol-SV06-firmware
#
# See https://www.klipper3d.org/Config_Reference.html for configuration reference.
[include ./osskc.cfg]
[include ./timelapse.cfg]
#[include ./cfgs/adxl-rp2040.cfg]
[mcu]
# NOTE Obtain definition by "ls -l /dev/serial/by-id/"
serial: /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0
restart_method: command
[printer]
kinematics: cartesian
max_velocity: 250
max_accel: 2800
max_z_velocity: 15
max_z_accel: 45
square_corner_velocity: 5.0
[input_shaper]
shaper_freq_x: 56.0
shaper_type_x: zv
shaper_freq_y: 55.4
shaper_type_y: 2hump_ei
#####################################################################
# X/Y/Z Stepper Settings
#####################################################################
[stepper_x]
step_pin: PC2
dir_pin: !PB9
enable_pin: !PC3
microsteps: 128
rotation_distance: 40
endstop_pin: tmc2209_stepper_x:virtual_endstop
position_endstop: 0
position_max: 223 # NOTE You can adjust this if you have more room
homing_speed: 40
homing_retract_dist: 0
[tmc2209 stepper_x]
uart_pin: PC1
run_current: 0.860
stealthchop_threshold: 0
interpolate: False
sense_resistor: 0.150
uart_address: 3
driver_SGTHRS: 81
diag_pin: PA5
[stepper_y]
step_pin: PB8
dir_pin: PB7
enable_pin: !PC3
microsteps: 128
rotation_distance: 40
endstop_pin: tmc2209_stepper_y:virtual_endstop
position_endstop: 0
position_max: 223 # NOTE You can adjust this if you have more room
homing_speed: 40
homing_retract_dist: 0
[tmc2209 stepper_y]
uart_pin: PC0
run_current: 0.900
stealthchop_threshold: 0
interpolate: False
sense_resistor: 0.150
uart_address: 3
driver_SGTHRS: 81
diag_pin: PA6
[stepper_z]
step_pin: PB6
dir_pin: !PB5
enable_pin: !PC3
microsteps: 128
rotation_distance: 4
endstop_pin: probe:z_virtual_endstop
position_min: -4
position_max: 258 # NOTE You can adjust this if you have more room
homing_speed: 5
[tmc2209 stepper_z]
uart_pin: PA15
run_current: 1.000
stealthchop_threshold: 0
interpolate: False
sense_resistor: 0.150
uart_address: 3
diag_pin: PA7
#####################################################################
# Extruder
#####################################################################
[extruder]
step_pin: PB4
dir_pin: !PB3
enable_pin: !PC3
microsteps: 128
rotation_distance: 4.65 # NOTE Calibrate e-steps https://www.klipper3d.org/Rotation_Distance.html#calibrating-rotation_distance-on-extruders, https://github.com/bassamanator/everything-sovol-sv06/blob/main/howto.md#calibrate-esteps
nozzle_diameter: 0.400
filament_diameter: 1.750
heater_pin: PA1
sensor_type: EPCOS 100K B57560G104F
sensor_pin: PC5
#control: pid
#pid_kd: 86.991
#pid_kp: 21.479
#pid_ki: 1.326
min_temp: 0
max_temp: 300
max_extrude_only_distance: 150.0
max_extrude_cross_section: 5 # NOTE Needed for KAMP purge
pressure_advance: 0.05
[tmc2209 extruder]
uart_pin: PC14
run_current: 0.550
stealthchop_threshold: 0
interpolate: False
sense_resistor: 0.150
uart_address: 3
#####################################################################
# Bed Heater
#####################################################################
[heater_bed]
heater_pin: PA2
sensor_type: EPCOS 100K B57560G104F
sensor_pin: PC4
#control: pid
#pid_kp: 64.440
#pid_ki: 0.773
#pid_kd: 1343.571
min_temp: 0
max_temp: 110
#####################################################################
# Probe Related
#####################################################################
[probe]
pin: PB1
x_offset: 27
y_offset: -20
#z_offset: 0
samples: 3
samples_result: median
samples_tolerance: 0.01
samples_tolerance_retries: 5
[safe_z_home]
home_xy_position: 84.50, 135 # NOTE The probe is at the center of the bed.
speed: 100.0
z_hop: 10
z_hop_speed: 15
[bed_mesh]
speed: 175
mesh_min: 27, 6 # probe as close to origin as possible while remaining fully on the bed
mesh_max: 222, 203 # (x.position_max - 1), (y.position_max - abs(y_offset)) ; probe as far as possible from the origin while remaining fully on the bed
probe_count: 5,5
algorithm: bicubic
fade_start: 1
fade_end: 10
fade_target: 0
[axis_twist_compensation]
calibrate_start_x: 27 # probe x coor at furthest left ; abs(x_offset)
calibrate_end_x: 195 # probe x coor at furthest right ; (x.position_max - abs(x_offset) - 1)
calibrate_y: 115
#####################################################################
# Fans
#####################################################################
[fan]
pin: PA0
#####################################################################
# Misc
#####################################################################
[display]
lcd_type: st7920
cs_pin: PB12
sclk_pin: PB13
sid_pin: PB15
encoder_pins: ^PB14, ^PB10
click_pin: ^!PB2
[bed_screws]
screw1_name: front left
screw1: 26.5, 31
screw2_name: front right
screw2: 196.75, 31
screw3_name: back right
screw3: 196.75, 201
screw4_name: back left
screw4: 26.5, 201
[screws_tilt_adjust]
screw1_name: center
screw1: 84.50, 135
screw2_name: front left
screw2: 0, 51
screw3_name: front right
screw3: 169.75, 51
screw4_name: back right
screw4: 169.75, 221
screw5_name: back left
screw5: 0, 221
horizontal_move_z: 10
screw_thread: CCW-M4
[output_pin beeper]
pin: PC6
value: 0
shutdown_value: 0
pwm: True
cycle_time: 0.0005 ; Default beeper tone in kHz. 1 / 0.0005 = 2000Hz (2kHz)
[filament_switch_sensor filament_sensor]
switch_pin: PA4 # "Pulled-high"
pause_on_runout: True
insert_gcode:
M117 Insert Detected
{ action_respond_info("Insert Detected") }
runout_gcode:
M117 Runout Detected
{ action_respond_info("Runout Detected") }
CONDITIONAL_BEEP i=3 dur=300 freq=400
[skew_correction]
#*# <---------------------- SAVE_CONFIG ---------------------->
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
#*#
#*# [heater_bed]
#*# control = pid
#*# pid_kp = 68.420
#*# pid_ki = 1.068
#*# pid_kd = 1095.581
#*#
#*# [extruder]
#*# control = pid
#*# pid_kp = 22.905
#*# pid_ki = 1.483
#*# pid_kd = 88.472
#*#
#*# [probe]
#*# z_offset = 1.410
#*#
#*# [bed_mesh default]
#*# version = 1
#*# points =
#*# -0.052344, -0.023750, -0.024063, -0.022500, -0.039219
#*# -0.029688, -0.011563, -0.011406, -0.013750, -0.048750
#*# -0.038750, -0.023281, -0.039375, -0.036875, -0.067188
#*# -0.035156, -0.035000, -0.035781, -0.034375, -0.065313
#*# -0.024688, -0.015781, -0.011406, -0.021094, -0.022500
#*# x_count = 5
#*# y_count = 5
#*# mesh_x_pps = 2
#*# mesh_y_pps = 2
#*# algo = lagrange
#*# tension = 0.2
#*# min_x = 27.0
#*# max_x = 222.0
#*# min_y = 6.0
#*# max_y = 203.0
#*#
#*# [skew_correction CaliFlower]
#*# xy_skew = -0.0001004783772044709
#*# xz_skew = 0.0
#*# yz_skew = 0.0

427
modules/services/printer/timelapse.cfg
View File

@ -1,427 +0,0 @@
# Timelapse klipper macro definition
#
# Copyright (C) 2021 Christoph Frei <fryakatkop@gmail.com>
# Copyright (C) 2021 Alex Zellner <alexander.zellner@googlemail.com>
#
# This file may be distributed under the terms of the GNU GPLv3 license
#
# Macro version 1.15
#
##### DO NOT CHANGE ANY MACRO!!! #####
##########################################################################
# #
# GET_TIMELAPSE_SETUP: Print the Timelapse setup to console #
# #
##########################################################################
[gcode_macro GET_TIMELAPSE_SETUP]
description: Print the Timelapse setup
gcode:
{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
{% set output_txt = ["Timelapse Setup:"] %}
{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
{% if tl.park.enable %}
{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
{% endif %}
{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
{% if not tl.extruder.fw_retract %}
{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
{% endif %}
{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
{action_respond_info(output_txt|join("\n"))}
################################################################################################
# #
# Use _SET_TIMELAPSE_SETUP [ENABLE=value] [VERBOSE=value] [PARK_ENABLE=value] [PARK_POS=value] #
# [PARK_TIME=value] [CUSTOM_POS_X=value] [CUSTOM_POS_Y=value] #
# [CUSTOM_POS_DZ=value][TRAVEL_SPEED=value] [RETRACT_SPEED=value] #
# [EXTRUDE_SPEED=value] [EXTRUDE_DISTANCE=value] #
# [RETRACT_DISTANCE=value] [FW_RETRACT=value] #
# #
################################################################################################
[gcode_macro _SET_TIMELAPSE_SETUP]
description: Set user parameters for timelapse
gcode:
{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
##### get min and max bed size #####
{% set min = printer.toolhead.axis_minimum %}
{% set max = printer.toolhead.axis_maximum %}
{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
else False %}
{% set park = {'min' : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
'max' : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
##### set new values #####
{% if params.ENABLE %}
{% if params.ENABLE|lower is in ['true', 'false'] %}
SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
{% else %}
{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
{% endif %}
{% endif %}
{% if params.VERBOSE %}
{% if params.VERBOSE|lower is in ['true', 'false'] %}
SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
{% else %}
{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
{% endif %}
{% endif %}
{% if params.CUSTOM_POS_X %}
{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
{% else %}
{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
{% endif %}
{% endif %}
{% if params.CUSTOM_POS_Y %}
{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
{% else %}
{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
{% endif %}
{% endif %}
{% if params.CUSTOM_POS_DZ %}
{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
{% else %}
{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
{% endif %}
{% endif %}
{% if params.PARK_ENABLE %}
{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
{% else %}
{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
{% endif %}
{% endif %}
{% if params.PARK_POS %}
{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom','x_only','y_only'] %}
{% set dic = {'center' : {'x': park.center.x , 'y': park.center.y , 'dz': 1 },
'front_left' : {'x': park.min.x , 'y': park.min.y , 'dz': 0 },
'front_right' : {'x': park.max.x , 'y': park.min.y , 'dz': 0 },
'back_left' : {'x': park.min.x , 'y': park.max.y , 'dz': 0 },
'back_right' : {'x': park.max.x , 'y': park.max.y , 'dz': 0 },
'custom' : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz},
'x_only' : {'x': tl.park.custom.x, 'y': 'none' , 'dz': tl.park.custom.dz},
'y_only' : {'x': 'none' , 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
{% else %}
{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM, X_ONLY, Y_ONLY]"
% params.PARK_POS|upper)}
{% endif %}
{% endif %}
{% if params.PARK_TIME %}
{% if params.PARK_TIME|float >= 0.0 %}
{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
{% else %}
{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
{% endif %}
{% endif %}
SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
{% if params.TRAVEL_SPEED %}
{% if params.TRAVEL_SPEED|float > 0.0 %}
{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
{% else %}
{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
{% endif %}
{% endif %}
{% if params.RETRACT_SPEED %}
{% if params.RETRACT_SPEED|float > 0.0 %}
{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
{% else %}
{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
{% endif %}
{% endif %}
{% if params.EXTRUDE_SPEED %}
{% if params.EXTRUDE_SPEED|float > 0.0 %}
{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
{% else %}
{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
{% endif %}
{% endif %}
SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
{% if params.EXTRUDE_DISTANCE %}
{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
{% else %}
{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
{% endif %}
{% endif %}
{% if params.RETRACT_DISTANCE %}
{% if params.RETRACT_DISTANCE|float >= 0.0 %}
{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
{% else %}
{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
{% endif %}
{% endif %}
{% if params.FW_RETRACT %}
{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
{% if 'firmware_retraction' in printer.configfile.settings %}
{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
{% else %}
{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
{% if params.FW_RETRACT|capitalize == 'True' %}
{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
{% endif %}
{% endif %}
{% else %}
{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
{% endif %}
{% endif %}
SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
{% if printer.configfile.settings['gcode_macro pause'] is defined %}
{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
{% endif %}
{% if printer.configfile.settings['gcode_macro resume'] is defined %}
{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
{% endif %}
SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"
##########################################################################
# #
# TIMELAPSE_TAKE_FRAME: take the next picture #
# #
##########################################################################
######################### definition #########################
## enable: enable or disable the next frame. Valid inputs: [True, False]
## takingframe: internal use. Valid inputs: [True, False]
##
## park.enable: enable or disable to park the head while taking a picture. Valid inputs: [True, False]
## park.pos : used position for parking. Valid inputs: [center, front_left, front_right, back_left, back_right, custom, x_only, y_only]
## park.time : used for the debug macro. Time in s
## park.custom.x, park.custom.y: coordinates of the custom parkposition. Unit [mm]
## park.custom.dz : custom z hop for the picture. Unit [mm]
## park.coord : internal use
##
## extruder.fw_retract: enable disable fw retraction [True,False]
## extruder.extrude : filament extruded at the end of park. Unit [mm]
## extruder.retract : filament retract at the start of park. Unit [mm]
##
## speed.travel : used speed for travel from and to the park positon. Unit: [mm/min]
## speed.retract: used speed for retract [mm/min]
## speed.extrude: used speed for extrude [mm/min]
##
## verbose: Enable mesage output of TIMELAPSE_TAKE_FRAME
##
## check_time: time when the status of the taken picture is checked. Default 0.5 sec
##
## restore.absolute.coordinates: internal use
## restore.absolute.extrude : internal use
## restore.speed : internal use
## restore.e : internal use
## restore.factor.speed : internal use
## restore.factor.extrude : internal use
##
## macro.pause : internal use
## macro.resume : internal use
##
## is_paused: internal use
###############################################################
[gcode_macro TIMELAPSE_TAKE_FRAME]
description: Take Timelapse shoot
variable_enable: False
variable_takingframe: False
variable_park: {'enable': False,
'pos' : 'center',
'time' : 0.1,
'custom': {'x': 0, 'y': 0, 'dz': 0},
'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder: {'fw_retract': False,
'retract': 1.0,
'extrude': 1.0}
variable_speed: {'travel': 100,
'retract': 15,
'extrude': 15}
variable_verbose: True
variable_check_time: 0.5
variable_restore: {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro: {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused: False
gcode:
{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
{% if enable %}
{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
{% if park.enable %}
{% set pos = {'x': 'X' + park.coord.x|string if park.pos != 'y_only' else '',
'y': 'Y' + park.coord.y|string if park.pos != 'x_only' else '',
'z': 'Z'+ [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min|string} %}
{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
'extrude' : printer.gcode_move.absolute_extrude},
'speed' : printer.gcode_move.speed,
'e' : printer.gcode_move.gcode_position.e,
'factor' : {'speed' : printer.gcode_move.speed_factor,
'extrude': printer.gcode_move.extrude_factor}} %}
SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
{% if not printer[printer.toolhead.extruder].can_extrude %}
{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
{% else %}
{% if extruder.fw_retract %}
G10
{% else %}
M83 ; insure relative extrusion
G0 E-{extruder.retract} F{speed.retract * 60}
{% endif %}
{% endif %}
SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
{macro.pause} ; execute the klipper PAUSE command
SET_GCODE_OFFSET X=0 Y=0 ; this will insure that the head parks always at the same position in a multi setup
G90 ; insure absolute move
{% if "xyz" not in printer.toolhead.homed_axes %}
{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
{% else %}
G0 {pos.x} {pos.y} {pos.z} F{speed.travel * 60}
{% endif %}
SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION={check_time}
M400
{% endif %}
_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
{% endif %}
{% else %}
{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
{% endif %}
[gcode_macro _TIMELAPSE_NEW_FRAME]
description: action call for timelapse shoot. must be a seperate macro
gcode:
{action_call_remote_method("timelapse_newframe",
macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
hyperlapse=params.HYPERLAPSE)}
[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode:
{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
{% if tl.takingframe %}
UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION={tl.check_time}
{% else %}
{tl.macro.resume} VELOCITY={tl.speed.travel} ; execute the klipper RESUME command
SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
{% if not printer[printer.toolhead.extruder].can_extrude %}
{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
{% else %}
{% if tl.extruder.fw_retract %}
G11
{% else %}
G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
G0 F{tl.restore.speed}
{% if tl.restore.absolute.extrude %}
M82
G92 E{tl.restore.e}
{% endif %}
{% endif %}
{% endif %}
{% if tl.restore.factor.speed != factor.speed %} M220 S{(factor.speed*100)|round(0)} {% endif %}
{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
{% endif %}
####################################################################################################
# #
# HYPERLAPSE: Starts or stops a Hyperlapse video #
# Usage: HYPERLAPSE ACTION=START [CYCLE=time] starts a hyperlapse with cycle time (default 30 sec) #
# HYPERLAPSE ACTION=STOP stops the hyperlapse recording #
# #
####################################################################################################
######################### definition #########################
## cycle: cycle time in seconds
## run: internal use [True/False]
###############################################################
[gcode_macro HYPERLAPSE]
description: Start/Stop a hyperlapse recording
variable_cycle: 0
variable_run: False
gcode:
{% set cycle = params.CYCLE|default(30)|int %}
{% if params.ACTION and params.ACTION|lower == 'start' %}
{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
{% elif params.ACTION and params.ACTION|lower == 'stop' %}
{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
{% else %}
{action_raise_error("Hyperlapse: No valid input parameter
Use:
- HYPERLAPSE ACTION=START [CYCLE=time]
- HYPERLAPSE ACTION=STOP")}
{% endif %}
[delayed_gcode _HYPERLAPSE_LOOP]
gcode:
UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
##########################################################################
# #
# TIMELAPSE_RENDER: Render the video at print end #
# #
##########################################################################
######################### definition #########################
## render: internal use. Valid inputs: [True, False]
## run_identifier: internal use. Valid input [0 .. 3]
###############################################################
[gcode_macro TIMELAPSE_RENDER]
description: Render Timelapse video and wait for the result
variable_render: False
variable_run_identifier: 0
gcode:
{action_respond_info("Timelapse: Rendering started")}
{action_call_remote_method("timelapse_render", byrendermacro="True")}
SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
{printer.configfile.settings['gcode_macro pause'].rename_existing} ; execute the klipper PAUSE command
UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode:
{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
M117 Rendering {['-','\\','|','/'][ri]}
UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
{% else %}
{action_respond_info("Timelapse: Rendering finished")}
M117
{printer.configfile.settings['gcode_macro resume'].rename_existing} ; execute the klipper RESUME command
{% endif %}
##########################################################################
# #
# TEST_STREAM_DELAY: Helper macro to find stream and park delay #
# #
##########################################################################
[gcode_macro TEST_STREAM_DELAY]
description: Helper macro to find stream and park delay
gcode:
{% set min = printer.toolhead.axis_minimum %}
{% set max = printer.toolhead.axis_maximum %}
{% set act = printer.toolhead.position %}
{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
{% if act.z > 5.0 %}
G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
G0 X{(max.x-min.x)/2}
G4 P{tl.park.time|float * 1000}
_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
G0 X{max.x - 5.0}
{% else %}
{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
{% endif %}

4
modules/services/server/default.nix
View File

@ -17,8 +17,8 @@
./nextcloud.nix
./matrix.nix
./coturn.nix
./hydra.nix
# ./ollama.nix
./jitsi.nix
./ollama.nix
]
# picom, polybar and sxhkd are pulled from desktop module

7
modules/services/server/gitea.nix
View File

@ -25,8 +25,6 @@
DOMAIN = "git.kabtop.de";
SSH_PORT = 2220;
ENABLE_GZIP = true;
LFS_START_SERVER = true;
LFS_ALLOW_PURE_SSH = true;
};
security = {
MIN_PASSWORD_LENGTH = 8;
@ -42,7 +40,7 @@
};
ui = {
SHOW_USER_EMAIL = false;
DEFAULT_THEME = "gitea-dark";
DEFAULT_THEME = "arc-green";
};
# openid = {
# ENABLE_OPENID_SIGNIN = true;
@ -66,9 +64,6 @@
actions = {
ENABLED = true;
};
indexer = {
REPO_INDEXER_ENABLED = false;
};
};
};

77
modules/services/server/hydra.nix
View File

@ -1,77 +0,0 @@
{ lib, config, pkgs, ... }:
{
services = {
hydra = {
enable = true;
hydraURL = "https://hydra.ci.kabtop.de";
listenHost = "127.0.0.1";
port = 3001;
notificationSender = "hydra@kabtop.de";
useSubstitutes = true;
minimumDiskFree = 50;
maxServers = 10;
};
nix-serve = {
enable = true;
port = 5001;
bindAddress = "127.0.0.1";
secretKeyFile = config.age.secrets."keys/nixsign".path;
};
nginx = {
enable = true;
recommendedProxySettings = true;
recommendedTlsSettings = true;
recommendedGzipSettings = true;
recommendedOptimisation = true;
virtualHosts = {
"ci.kabtop.de" = {
enableACME = true;
forceSSL = true;
default = true;
locations."/".return = "503";
};
"hydra.ci.kabtop.de" = {
enableACME = true;
forceSSL = true;
locations."/" = {
proxyPass = "http://localhost:3001";
extraConfig = ''
proxy_set_header X-Forwarded-Port 443;
'';
};
};
"cache.ci.kabtop.de" = {
enableACME = true;
forceSSL = true;
locations."/".proxyPass = "http://${config.services.nix-serve.bindAddress}:${toString config.services.nix-serve.port}";
};
};
};
};
nix = {
settings = {
cores = 5;
max-jobs = 1;
trusted-users = [
"hydra"
];
allowed-uris = [
"github:"
"https://github.com/"
"git+ssh://github.com/"
];
};
extraOptions = ''
secret-key-files = ${config.age.secrets."keys/nixsign".path}
'';
};
age.secrets."keys/nixsign" = {
file = ../../../secrets/keys/nixservepriv.age;
owner = "hydra";
};
}

225
modules/services/server/matrix.nix
View File

@ -17,6 +17,12 @@ let
return 200 '${builtins.toJSON data}';
'';
in {
environment.systemPackages = [
pkgs.mautrix-whatsapp
pkgs.signald
pkgs.mautrix-signal
];
services.nginx = {
enable = true;
recommendedTlsSettings = true;
@ -54,8 +60,6 @@ in {
};
};
imports = [ ../../kabbone/mautrix-whatsapp.nix ];
services.matrix-synapse = {
enable = true;
settings = {
@ -73,6 +77,11 @@ in {
];
}
];
app_service_config_files = [
config.age.secrets."services/matrix/whatsapp-registration.yml".path
config.age.secrets."services/matrix/telegram-registration.yml".path
config.age.secrets."services/matrix/signal-registration.yml".path
];
};
extraConfigFiles = [
config.age.secrets."services/matrix/synapse.yml".path
@ -83,12 +92,113 @@ in {
matrix-synapse = {
requires = [ "postgresql.service" ];
};
mautrix-whatsapp = {
description = "Matrix <-> WhatsApp bridge";
wantedBy = [ "multi-user.target" ];
after = [ "network.target" "postgresql.service" "matrix-synapse.service" ];
requires = [ "postgresql.service" "matrix-synapse.service" ];
script = "${pkgs.mautrix-whatsapp}/bin/mautrix-whatsapp -n --config ${config.age.secrets."services/matrix/mautrix-whatsapp.yml".path}";
serviceConfig = {
User = "mautrix-whatsapp";
Group = "mautrix-whatsapp";
Environment = "HOME=/var/lib/mautrix-whatsapp";
ReadWritePaths="/var/log/mautrix-whatsapp";
NoNewPrivileges=true;
MemoryDenyWriteExecute=true;
PrivateDevices=true;
PrivateTmp=true;
ProtectHome=true;
ProtectSystem="strict";
ProtectControlGroups=true;
RestrictSUIDSGID=true;
RestrictRealtime=true;
LockPersonality=true;
ProtectKernelLogs=true;
ProtectKernelTunables=true;
ProtectHostname=true;
ProtectKernelModules=true;
PrivateUsers=true;
ProtectClock=true;
SystemCallArchitectures="native";
SystemCallErrorNumber="EPERM";
SystemCallFilter="@system-service";
};
};
mautrix-signal = {
description = "Matrix <-> Signal bridge";
wantedBy = [ "multi-user.target" ];
after = [ "network.target" "postgresql.service" "matrix-synapse.service" "signald.service" ];
requires = [ "postgresql.service" "matrix-synapse.service" "signald.service"];
script = "${pkgs.mautrix-signal}/bin/mautrix-signal -n --config ${config.age.secrets."services/matrix/mautrix-signal.yml".path}";
serviceConfig = {
User = "mautrix-signal";
Group = "mautrix-signal";
Environment = "HOME=/var/lib/mautrix-signal";
ReadWritePaths= [
"/var/run/signald/signald.sock"
"/var/log/mautrix-signal"
];
NoNewPrivileges=true;
MemoryDenyWriteExecute=true;
PrivateDevices=true;
PrivateTmp=true;
ProtectHome=true;
ProtectSystem="strict";
ProtectControlGroups=true;
RestrictSUIDSGID=true;
RestrictRealtime=true;
LockPersonality=true;
ProtectKernelLogs=true;
ProtectKernelTunables=true;
ProtectHostname=true;
ProtectKernelModules=true;
PrivateUsers=true;
ProtectClock=true;
SystemCallArchitectures="native";
SystemCallErrorNumber="EPERM";
SystemCallFilter="@system-service";
};
};
};
systemd.tmpfiles.rules = [
"d /var/log/mautrix-whatsapp - mautrix-whatsapp mautrix-whatsapp"
"d /var/log/mautrix-signal - mautrix-signal mautrix-signal"
];
users = {
users = {
mautrix-whatsapp = {
uid = 3001;
group = "mautrix-whatsapp";
isSystemUser = true;
};
mautrix-telegram = {
uid = 3002;
group = "mautrix-telegram";
isSystemUser = true;
};
mautrix-signal = {
uid = 3003;
group = "mautrix-signal";
isSystemUser = true;
};
};
groups = {
mautrix-whatsapp = {
gid = 3001;
};
mautrix-telegram = {
gid = 3002;
};
mautrix-signal = {
gid = 3003;
};
};
};
services = {
mautrix-telegram = {
enable = true;
registerToSynapse = true;
environmentFile = config.age.secrets."services/matrix/mautrix-telegram.env".path;
settings = {
homeserver = {
@ -97,6 +207,7 @@ in {
};
appservice = {
hostname = "127.0.0.1";
port = "29317";
provisioning.enabled = false;
id = "telegram";
public = {
@ -144,93 +255,10 @@ in {
};
};
};
mautrix-signal = {
enable = true;
registerToSynapse = true;
environmentFile = config.age.secrets."services/matrix/mautrix-signal.env".path;
settings = {
homeserver = {
address = "http://localhost:8008";
domain = "kabtop.de";
};
appservice = {
hostname = "127.0.0.1";
id = "signal";
as_token = "$MAUTRIX_SIGNAL_AS_TOKEN";
hs_token = "$MAUTRIX_SIGNAL_HS_TOKEN";
};
database = {
type = "postgres";
uri = "$MAUTRIX_SIGNAL_APPSERVICE_DATABASE";
};
encryption = {
allow = true;
default = true;
verification_levels = {
receive = "cross-signed-untrusted";
send = "cross-signed-untrusted";
};
pickle_key = "$MAUTRIX_SIGNAL_ENCRYPTION_PICKLE_KEY";
};
backfill = {
enabled = true;
};
bridge = {
permissions = {
"@kabbone:kabtop.de" = "admin";
};
};
logging = {
min_level = "warn";
writers = [
{
format = "pretty-colored";
type = "stdout";
}
];
};
};
};
kabbone_mautrix-whatsapp = {
enable = true;
registerToSynapse = true;
environmentFile = config.age.secrets."services/matrix/mautrix-whatsapp.env".path;
settings = {
homeserver = {
address = "http://localhost:8008";
domain = "kabtop.de";
};
appservice = {
hostname = "127.0.0.1";
id = "whatsapp";
as_token = "$MAUTRIX_WHATSAPP_AS_TOKEN";
hs_token = "$MAUTRIX_WHATSAPP_HS_TOKEN";
};
database = {
type = "postgres";
uri = "$MAUTRIX_WHATSAPP_APPSERVICE_DATABASE";
};
encryption = {
allow = true;
default = true;
verification_levels = {
receive = "cross-signed-untrusted";
send = "cross-signed-untrusted";
};
pickle_key = "$MAUTRIX_WHATSAPP_ENCRYPTION_PICKLE_KEY";
};
network = {
history_sync.request_full_sync = true;
};
bridge = {
permissions = {
"@kabbone:kabtop.de" = "admin";
};
};
logging = {
min_level = "warn";
};
};
signald = {
enable = true;
user = "mautrix-signal";
group = "mautrix-signal";
};
};
@ -242,12 +270,25 @@ in {
file = ../../../secrets/services/matrix/mautrix-telegram.age;
owner = "mautrix-telegram";
};
age.secrets."services/matrix/mautrix-whatsapp.env" = {
age.secrets."services/matrix/mautrix-whatsapp.yml" = {
file = ../../../secrets/services/matrix/mautrix-whatsapp.age;
owner = "mautrix-whatsapp";
};
age.secrets."services/matrix/mautrix-signal.env" = {
age.secrets."services/matrix/mautrix-signal.yml" = {
file = ../../../secrets/services/matrix/mautrix-signal.age;
owner = "mautrix-signal";
};
age.secrets."services/matrix/telegram-registration.yml" = {
file = ../../../secrets/services/matrix/telegram-registration.age;
owner = "matrix-synapse";
};
age.secrets."services/matrix/whatsapp-registration.yml" = {
file = ../../../secrets/services/matrix/whatsapp-registration.age;
owner = "matrix-synapse";
};
age.secrets."services/matrix/signal-registration.yml" = {
file = ../../../secrets/services/matrix/signal-registration.age;
owner = "matrix-synapse";
};
}

1
modules/services/server/microvm.nix
View File

@ -97,6 +97,7 @@ in
hypervisor = "qemu";
vcpu = 4;
mem = 4096;
balloonMem = 4096;
#kernel = pkgs.linuxKernel.packages.linux_latest;
interfaces = [
{

71
modules/services/server/nextcloud.nix
View File

@ -9,21 +9,15 @@
enable = true;
hostName = "cloud.kabtop.de";
https = true;
package = pkgs.nextcloud31;
package = pkgs.nextcloud27;
database.createLocally = false;
notify_push.enable = false;
enableImagemagick = true;
maxUploadSize = "512M";
logType = "file";
caching = {
redis = true;
apcu = false;
};
settings = {
log_type = "file";
extraOptions = {
logfile = "nextcloud.log";
overwriteprotocol = "https";
default_phone_region = "DE";
redis = {
host = "/run/redis-nextcloud/redis.sock";
port = 0;
@ -31,22 +25,6 @@
"memcache.local" = "\\OC\\Memcache\\Redis";
"memcache.distributed" = "\\OC\\Memcache\\Redis";
"memcache.locking" = "\\OC\\Memcache\\Redis";
"enable_previews" = true;
"enabledPreviewproviders" = "
array (
'OC\Preview\PNG',
'OC\Preview\JPEG',
'OC\Preview\GIF',
'OC\Preview\BMP',
'OC\Preview\XBitmap',
'OC\Preview\MP3',
'OC\Preview\TXT',
'OC\Preview\MarkDown',
'OC\Preview\OpenDocument',
'OC\Preview\Krita',
'OC\Preview\HEIC',
)";
"maintenance_window_start" = "1";
};
config = {
dbtype = "pgsql";
@ -56,6 +34,8 @@
adminuser = "kabbone";
adminpassFile = config.age.secrets."services/nextcloud/adminpassFile".path;
dbpassFile = config.age.secrets."services/nextcloud/dbpassFile".path;
overwriteProtocol = "https";
defaultPhoneRegion = "DE";
};
phpOptions = {
"opcache.interned_strings_buffer" = "16";
@ -63,15 +43,15 @@
#autoUpdateApps.enable = true;
};
# services.onlyoffice = {
# enable = true;
# hostname = "docs.cloud.kabtop.de";
# postgresName = "onlyoffice";
# postgresHost = "localhost";
# postgresUser = "onlyoffice";
# postgresPasswordFile = config.age.secrets."services/nextcloud/onlyofficedb".path;
# jwtSecretFile = config.age.secrets."services/nextcloud/onlyofficejwt".path;
# };
services.onlyoffice = {
enable = true;
hostname = "docs.cloud.kabtop.de";
postgresName = "onlyoffice";
postgresHost = "localhost";
postgresUser = "onlyoffice";
postgresPasswordFile = config.age.secrets."services/nextcloud/onlyofficedb".path;
jwtSecretFile = config.age.secrets."services/nextcloud/onlyofficejwt".path;
};
services.redis = {
vmOverCommit = true;
@ -89,10 +69,9 @@
enableACME = true;
forceSSL = true;
};
# "${config.services.onlyoffice.hostname}" = {
# enableACME = true;
# forceSSL = true;
# };
"${config.services.onlyoffice.hostname}".listen = [ {
addr = "127.0.0.1"; port = 8080;
} ];
};
};
@ -104,14 +83,14 @@
file = ../../../secrets/services/nextcloud/adminpassFile.age;
owner = "nextcloud";
};
# age.secrets."services/nextcloud/onlyofficedb" = {
# file = ../../../secrets/services/nextcloud/onlyofficedb.age;
# owner = "onlyoffice";
# };
# age.secrets."services/nextcloud/onlyofficejwt" = {
# file = ../../../secrets/services/nextcloud/onlyofficejwt.age;
# owner = "onlyoffice";
# };
age.secrets."services/nextcloud/onlyofficedb" = {
file = ../../../secrets/services/nextcloud/onlyofficedb.age;
owner = "onlyoffice";
};
age.secrets."services/nextcloud/onlyofficejwt" = {
file = ../../../secrets/services/nextcloud/onlyofficejwt.age;
owner = "onlyoffice";
};
systemd.services."nextcloud-setup" = {
requires = ["postgresql.service"];

30
modules/services/server/postgresql.nix
View File

@ -5,10 +5,9 @@
{ config, lib, pkgs, ... }:
{
# imports = [ ./postgresql_upgrade.nix ];
services.postgresql = {
enable = true;
package = pkgs.postgresql_16;
package = pkgs.postgresql_15;
settings = {
max_connections = 200;
listen_addresses = "localhost";
@ -21,24 +20,15 @@
timezone = "Europe/Berlin";
};
authentication = pkgs.lib.mkOverride 14 ''
local all postgres peer
host giteadb gitea localhost scram-sha-256
host nextclouddb nextcloud localhost scram-sha-256
host synapsedb synapse localhost scram-sha-256
host whatsappdb mautrixwa localhost scram-sha-256
host telegramdb mautrixtele localhost scram-sha-256
host signaldb mautrixsignal localhost scram-sha-256
host onlyoffice onlyoffice localhost scram-sha-256
local onlyoffice onlyoffice peer
local hydra all ident map=hydra-users
'';
identMap = ''
hydra-users hydra hydra
hydra-users hydra-queue-runner hydra
hydra-users hydra-www hydra
hydra-users root hydra
# The postgres user is used to create the pg_trgm extension for the hydra database
hydra-users postgres postgres
local all postgres peer
host giteadb gitea localhost scram-sha-256
host nextclouddb nextcloud localhost scram-sha-256
host synapsedb synapse localhost scram-sha-256
host whatsappdb mautrixwa localhost scram-sha-256
host telegramdb mautrixtele localhost scram-sha-256
host signaldb mautrixsignal localhost scram-sha-256
host onlyoffice onlyoffice localhost scram-sha-256
local onlyoffice onlyoffice peer
'';
initialScript = config.age.secrets."services/postgresql/initScript.sql".path;
};

33
modules/services/server/postgresql_upgrade.nix
View File

@ -1,33 +0,0 @@
{ config, lib, pkgs, ... }:
{
environment.systemPackages = [
(let
# XXX specify the postgresql package you'd like to upgrade to.
# Do not forget to list the extensions you need.
newPostgres = pkgs.postgresql_16.withPackages (pp: [
# pp.plv8
]);
cfg = config.services.postgresql;
in pkgs.writeScriptBin "upgrade-pg-cluster" ''
set -eux
# XXX it's perhaps advisable to stop all services that depend on postgresql
systemctl stop postgresql
export NEWDATA="/var/lib/postgresql/${newPostgres.psqlSchema}"
export NEWBIN="${newPostgres}/bin"
export OLDDATA="${cfg.dataDir}"
export OLDBIN="${cfg.package}/bin"
install -d -m 0700 -o postgres -g postgres "$NEWDATA"
cd "$NEWDATA"
sudo -u postgres $NEWBIN/initdb -D "$NEWDATA" ${lib.escapeShellArgs cfg.initdbArgs}
sudo -u postgres $NEWBIN/pg_upgrade \
--old-datadir "$OLDDATA" --new-datadir "$NEWDATA" \
--old-bindir $OLDBIN --new-bindir $NEWBIN \
"$@"
'')
];
}

2
modules/shell/git.nix
View File

@ -16,9 +16,7 @@
};
extraConfig = {
gpg = { format = "ssh"; };
credential = { helper = "cache --timeout=3600"; };
};
difftastic.enable = true;
};
};
}

20
modules/shell/tmux.nix
View File

@ -19,22 +19,22 @@
plugins = with pkgs.tmuxPlugins; [
yank
sidebar
# {
{
# plugin = dracula;
# extraConfig = "
# set -g @dracula-show-powerline true
# set -g @dracula-plugins 'git cpu-usage ram-usage battery time'
# set -g @dracula-border-contrast true
# ";
# plugin = catppuccin;
# extraConfig = "
# set -g @catppuccin_flavour 'macchiato'
# set -g @catppuccin_window_tabs_enabled 'on'
# set -g @catppuccin_host 'on'
# set -g @catppuccin_user 'on'
# set -g @catppuccin_date_time '%Y-%m-%d %H:%M'
# ";
# }
plugin = catppuccin;
extraConfig = "
set -g @catppuccin_flavour 'macchiato'
set -g @catppuccin_window_tabs_enabled 'on'
set -g @catppuccin_host 'on'
set -g @catppuccin_user 'on'
set -g @catppuccin_date_time '%Y-%m-%d %H:%M'
";
}
];
extraConfig = ''
set -g mouse on

11
modules/shell/zsh.nix
View File

@ -9,7 +9,7 @@
zsh = {
enable = true;
dotDir = ".config/zsh_nix";
autosuggestion.enable = true; # Auto suggest options and highlights syntact, searches in history for options
enableAutosuggestions = true; # Auto suggest options and highlights syntact, searches in history for options
syntaxHighlighting.enable = true;
history.size = 10000;
@ -19,12 +19,18 @@
custom = "$HOME/.config/zsh_nix/custom";
};
initContent = ''
initExtraFirst = '' # very first inits in zshrc
if [[ $DISPLAY ]]; then
[[ $- != *i* ]] && return
[[ -z "$TMUX" ]] && (tmux attach || tmux new-session)
fi
'';
initExtra = '' # Zsh theme
export GPG_TTY=$(tty)
gpg-connect-agent updatestartuptty /bye >/dev/null
unset SSH_AGENT_PID
export SSH_AUTH_SOCK="/run/user/$UID/gnupg/S.gpg-agent.ssh"
# Spaceship
source ${pkgs.spaceship-prompt}/share/zsh/site-functions/prompt_spaceship_setup
autoload -U promptinit; promptinit
@ -34,7 +40,6 @@
# Swag
pfetch # Show fetch logo on terminal start
eval "$(direnv hook zsh)"
eval "$(ssh-agent)"
'';
};
};

7
modules/themes/.gitattributes vendored
View File

@ -1,7 +0,0 @@
nixos-wallpaper-catppuccin-mocha.svg filter=lfs diff=lfs merge=lfs -text
nix-wallpaper-nineish-solarized-dark.src.svg filter=lfs diff=lfs merge=lfs -text
nix-wallpaper-nineish-solarized-dark.png filter=lfs diff=lfs merge=lfs -text
nix-wallpaper-binary-black.png filter=lfs diff=lfs merge=lfs -text
lockwall.jpg filter=lfs diff=lfs merge=lfs -text
nuka_col.jpg filter=lfs diff=lfs merge=lfs -text
wall.jpg filter=lfs diff=lfs merge=lfs -text

BIN
modules/themes/lockwall.jpg
View File

Binary file not shown.
Side by Side Swipe Overlay

Before

Width:  |  Height:  |  Size: 131 B

After

Width:  |  Height:  |  Size: 285 KiB

BIN
modules/themes/nix-wallpaper-binary-black.png (Stored with Git LFS)
View File

Binary file not shown.

BIN
modules/themes/nix-wallpaper-nineish-solarized-dark.png (Stored with Git LFS)
View File

Binary file not shown.

BIN
modules/themes/nix-wallpaper-nineish-solarized-dark.src.svg (Stored with Git LFS)
View File

Binary file not shown.

BIN
modules/themes/nixos-wallpaper-catppuccin-mocha.svg (Stored with Git LFS)
View File

Binary file not shown.

Some files were not shown because too many files have changed in this diff Show More