Kabbone/corne
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge pull request #28 from Naycon/readme/testing

Browse Source 
Added more info on testing to the english builde guide.
This commit is contained in:
Kosuke Adachi 2019-10-19 11:19:42 +09:00 committed by GitHub
commit 36d73f759d
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 7 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
corne-classic/doc/buildguide_en.md
View File

@ -158,14 +158,17 @@ Comparing pin-headers in the picture. Headers come with OLED available at Yusha-
### Testing
It is recommended to test the ProMicro and OLED modules before installing key switches because rework would be difficult after that.
It is recommended to test the ProMicro and OLED modules before installing keyswitches because rework would be difficult after that.
First, build QMK Firmware for built for Crkbd and install on ProMicro.
First, build QMK Firmware for built for Crkbd and install on ProMicro (if you haven't already done so).
![image](https://user-images.githubusercontent.com/736191/40888832-0d793c3a-6798-11e8-93b4-55ec7e180748.png)
Using the default keymap, OLED will show information on the keyswitches being pressed. Check the connections by short-circuiting key-switch soldering pads with tweezers. Check all of them.
If you have mounted LEDs, also make sure all of them are turned on.
Using the default keymap, OLED will show information on the keyswitches being pressed. Check the connections by short-circuiting keyswitch soldering pads with tweezers or a bit of soldering wire. Check all of them.
If you have OLED displays, you can verify that all keys are responding by looking at the log information showed there. It will say which row and column was pressed, e.g. `1x5` or `0x2`. Using the tweezers or wire, connect each buttons soldering pads and make sure the display changes. If something isn't working, take note of the which row x column it is that isn't working, as it can help when troubleshooting.
If you have mounted LEDs, also make sure all of them are turned on. As note before, the default firmware has LEDs __turned off__, so you have to turn them on in the firmware before you test.
![image](https://user-images.githubusercontent.com/736191/40888868-73028d36-6798-11e8-8246-0c9ca32711d6.png)