Flip MCU pads for face down and re-route

Sweep Bling MX/pcb/auto-router/sweep-bling-mx__pcb.rules

@@ -1,78 +0,0 @@
-
-(rules PCB sweep-bling-mx__pcb
-  (snap_angle 
-    fortyfive_degree
-  )
-  (autoroute_settings
-    (fanout off)
-    (autoroute on)
-    (postroute on)
-    (vias on)
-    (via_costs 50)
-    (plane_via_costs 5)
-    (start_ripup_costs 100)
-    (start_pass_no 1097)
-    (layer_rule F.Cu
-      (active on)
-      (preferred_direction horizontal)
-      (preferred_direction_trace_costs 1.0)
-      (against_preferred_direction_trace_costs 2.2)
-    )
-    (layer_rule B.Cu
-      (active on)
-      (preferred_direction vertical)
-      (preferred_direction_trace_costs 1.0)
-      (against_preferred_direction_trace_costs 1.8)
-    )
-  )
-  (rule
-    (width 250.0)
-    (clear 200.2)
-    (clear 125.0 (type smd_to_turn_gap))
-    (clear 50.0 (type smd_smd))
-  )
-  (padstack "Via[0-1]_800:400_um"
-    (shape
-      (circle F.Cu 800.0 0.0 0.0)
-    )
-    (shape
-      (circle B.Cu 800.0 0.0 0.0)
-    )
-    (attach off)
-  )
-  (via 
-    "Via[0-1]_800:400_um" "Via[0-1]_800:400_um" default
-  )
-  (via 
-    "Via[0-1]_800:400_um-kicad_default" "Via[0-1]_800:400_um" "kicad_default"
-  )
-  (via_rule
-    default "Via[0-1]_800:400_um"
-  )
-  (via_rule
-    "kicad_default" "Via[0-1]_800:400_um-kicad_default"
-  )
-  (class default
-    (clearance_class default)
-    (via_rule default)
-    (rule
-      (width 250.0)
-    )
-    (circuit 
-      (use_layer F.Cu B.Cu)
-    )
-  )
-  (class "kicad_default"
-    gnd vcc Switch18 reset Switch1 Switch2 Switch3 Switch4
-    Switch5 Switch6 Switch7 Switch8 Switch9 Switch10 Switch11 Switch12
-    Switch13 Switch14 Switch15 Switch16 Switch17 raw "BT+_r" "Net-(SW_POWERR1-Pad1)"
-    (clearance_class "kicad_default")
-    (via_rule kicad_default)
-    (rule
-      (width 250.0)
-    )
-    (circuit 
-      (use_layer F.Cu B.Cu)
-    )
-  )
-)