update README

Signed-off-by: Kabbone <tobias@opel-online.de>

README.md

@@ -1,3 +1,14 @@
 # rock64
 
 changes, Packages, Information
+
+dd if=rksd_load.img of=/dev/mmcblk1 seek=64 conv=notrunc
+dd if=u-boot.itb of=/dev/mmcblk1 seek=16384 conv=notrunc
+
+layout, see:
+http://opensource.rock-chips.com/wiki_U-Boot
+http://opensource.rock-chips.com/wiki_Boot_option
+![alt text](./Rockchip_bootflow.jpg "Partition Layout")
+
+ARM-Trusted-Firmware:
+http://opensource.rock-chips.com/wiki_ATF

firmwares/README.md

@@ -1,7 +0,0 @@
-# H1 How to build your own idbloader.img file
-
-```
-$ mkimage -n rk3328 -T rksd -d rk3328_ddr_333MHz_v1.13.bin idbloader.img
-$ cat rk3328_miniloader_v2.46.bin >> idbloader.img
-# dd if=idbloader.img of=/dev/sdx seek=64 conv=notrunc
-```

images/boot.txt

@@ -3,8 +3,9 @@
 # MAC address (use spaces instead of colons)
 setenv macaddr da 19 c8 7a 6d f4
 
-#part uuid ${devtype} ${devnum}:${bootpart} uuid
+part uuid ${devtype} ${devnum}:${bootpart} uuid
-setenv bootargs console=ttyS2,1500000 root=LABEL=ROOTFS rootfstype=btrfs rootflags=subvol=@ rw rootwait earlycon=uart8250,mmio32,0xff130000 audit=0
+setenv bootargs console=ttyS2,1500000 root=UUID=${uuid} rw rootwait earlycon=uart8250,mmio32,0xff130000 audit=0
+#setenv bootargs console=ttyS2,1500000 root=LABEL=ROOTFS rootfstype=btrfs rootflags=subvol=@ rw rootwait earlycon=uart8250,mmio32,0xff130000 audit=0
 setenv fdtfile rockchip/rk3328-rock64.dtb
 
 if load ${devtype} ${devnum}:${bootpart} ${kernel_addr_r} /boot/Image; then

uboot-rock64/PKGBUILD

@@ -1,9 +1,9 @@
-# U-Boot: Rock64
+#U-Boot: Rock64
 # Maintainer: Kevin Mihelich <kevin@archlinuxarm.org>
 
 pkgname=uboot-rock64
-pkgver=2020.01
+pkgver=2020.04
-pkgrel=2
+pkgrel=3
 pkgdesc="U-Boot for Rock64"
 arch=('aarch64')
 url='http://www.denx.de/wiki/U-Boot/WebHome'
@@ -12,21 +12,25 @@ backup=('boot/boot.txt' 'boot/boot.scr')
 makedepends=('bc' 'git' 'python' 'swig' 'dtc')
 install=${pkgname}.install
 _commit_rkbin=15a3e065a49ba7981945d725207618e92ebe8ebb
-source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver/rc/-rc}.tar.bz2"
+source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver/rc/-rc}-rc5.tar.bz2"
-        "git+https://github.com/rockchip-linux/rkbin.git#commit=$_commit_rkbin"
+        "https://github.com/ARM-software/arm-trusted-firmware/archive/v2.3-rc0.tar.gz"
         'boot.txt'
         'mkscr')
-md5sums=('b6b2e0787b6874e6b57da0a065a84f5a'
+md5sums=('86f167cfe3a840ac47ddba868d6f1576'
-         'SKIP'
+         'd1a2ae6b8b7a86a661db4079dd08b941'
-         '5f1089c471f39b303bccbb9e1fc196f7'
+         'a4f9a9f05a4e41f54b60a51318ffca36'
          '021623a04afd29ac3f368977140cfbfd')
 
 prepare() {
-  cd ${srcdir}/u-boot-${pkgver/rc/-rc}
+  cd ${srcdir}/arm-trusted-firmware-2.3-rc0
-  cp ../rkbin/bin/rk33/rk322xh_bl31_v1.43.elf ./bl31.elf
+  make PLAT=rk3328 all
-  cp ../rkbin/bin/rk33/rk322xh_bl32_v1.54.bin ./bl32.bin
 
-  sed -i 's/lpddr3-1600/lpddr3-666/g' arch/arm/dts/rk3328-rock64-u-boot.dtsi
+  mv ${srcdir}/u-boot-${pkgver}{-rc5,}
+  cd ${srcdir}/u-boot-${pkgver/rc/-rc}
+  cp ../arm-trusted-firmware-2.3-rc0/build/rk3328/release/bl31/bl31.elf ./bl31.elf
+
+#  sed -i 's/lpddr3-1600/lpddr3-666/g' arch/arm/dts/rk3328-rock64-u-boot.dtsi
+  sed -i 's/800/600/g' arch/arm/dts/rk3328-sdram-lpddr3-1600.dtsi
 
   cd ${srcdir}/u-boot-${pkgver/rc/-rc}/configs
   echo 'CONFIG_CMD_BTRFS=y' >> rock64-rk3328_defconfig

uboot-rock64/boot.txt

@@ -3,8 +3,9 @@
 # MAC address (use spaces instead of colons)
 setenv macaddr da 19 c8 7a 6d f4
 
-#part uuid ${devtype} ${devnum}:${bootpart} uuid
+part uuid ${devtype} ${devnum}:${bootpart} uuid
-setenv bootargs console=ttyS2,1500000 root=LABEL=ROOTFS rootfstype=btrfs rootflags=subvol=@ rw rootwait earlycon=uart8250,mmio32,0xff130000 audit=0
+setenv bootargs console=ttyS2,1500000 root=UUID=${uuid} rw rootwait earlycon=uart8250,mmio32,0xff130000 audit=0
+#setenv bootargs console=ttyS2,1500000 root=LABEL=ROOTFS rootfstype=btrfs rootflags=subvol=@ rw rootwait earlycon=uart8250,mmio32,0xff130000 audit=0
 setenv fdtfile rockchip/rk3328-rock64.dtb
 
 if load ${devtype} ${devnum}:${bootpart} ${kernel_addr_r} /boot/Image; then

uboot-rock64/rk3328trust.ini

@@ -1,17 +0,0 @@
-[VERSION]
-MAJOR=1
-MINOR=2
-[BL30_OPTION]
-SEC=0
-[BL31_OPTION]
-SEC=1
-PATH=../rkbin/bin/rk33/rk322xh_bl31_v1.43.elf
-ADDR=0x40000
-[BL32_OPTION]
-SEC=1
-PATH=../rkbin/bin/rk33/rk322xh_bl32_v1.54.bin
-ADDR=0x08400000
-[BL33_OPTION]
-SEC=0
-[OUTPUT]
-PATH=trust.img

uboot-rock64/uboot-rock64.install

@@ -1,14 +1,14 @@
 flash_uboot() {
-  echo "A new U-Boot version needs to be flashed onto /dev/mmcblk0."
+  echo "A new U-Boot version needs to be flashed onto /dev/mmcblk1."
   echo "Do you want to do this now? [y|N]"
   read -r shouldwe
   if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then
-    dd if=/boot/rksd_loader.img of=/dev/mmcblk0 seek=64 conv=notrunc
+    dd if=/boot/rksd_loader.img of=/dev/mmcblk1 seek=64 conv=notrunc
-    dd if=/boot/u-boot.itb of=/dev/mmcblk0 seek=16384 conv=notrunc
+    dd if=/boot/u-boot.itb of=/dev/mmcblk1 seek=16384 conv=notrunc
   else
     echo "You can do this later by running:"
-    echo "# dd if=/boot/rksd_loader.img of=/dev/mmcblk0 seek=64 conv=notrunc"
+    echo "# dd if=/boot/rksd_loader.img of=/dev/mmcblk1 seek=64 conv=notrunc"
-    echo "# dd if=/boot/u-boot.itb of=/dev/mmcblk0 seek=16384 conv=notrunc"
+    echo "# dd if=/boot/u-boot.itb of=/dev/mmcblk1 seek=16384 conv=notrunc"
   fi
 }
 
@@ -22,3 +22,5 @@ post_install() {
 post_upgrade() {
   flash_uboot
 }
+
+##lsblk -dnpo name /dev/disk/by-partuuid/785dd377-de81-44f8-8cc9-0dcdc9a5c713