initial

doc/firmware_en.md

@@ -22,7 +22,7 @@ Open QMK Toolbox, you will see a window like the one below.
 ### Flash the firmware
 
 Download the firmware of VIA from the following link.\
-[crkbd_rev1_common_via.hex](https://raw.githubusercontent.com/foostan/qmk_firmware-hex/main/.build/crkbd_rev1_via.hex)
+[crkbd_rev1_common_via.hex]()
 
 Specify the file downloaded from "**Open**" in QMK Toolbox.
 And enable the check box for "**Auto-Flash**".
@@ -30,7 +30,7 @@ And enable the check box for "**Auto-Flash**".
 ![qmk_toolbox_flash](assets/qmk_toolbox_flash.jpg)
 
 With the keyboard connected via USB,
-press the reset button to start flashing the firmware. \
+press the reset button **twice** or short **GND & RST** pins on ProMicro to start flashing the firmware. \
 If you see the message, it's done.
 
 ![qmk_toolbox_flashed](assets/qmk_toolbox_flashed.jpg)
@@ -48,25 +48,22 @@ Once the environment is ready,
 build the firmware for Crkbd with the following command.
 
 ```
-make crkbd/rev1/common:via
+make crkbd:via
 ```
 
 When the build is completed,
-execute the following command.
+execute the following command to flash.
 
 ```
-make crkbd/rev1/common:via:avrdude
+make crkbd:via:avrdude
 ```
 
 When you execute it,
-you will see the following log,
-and you can progress by `.`s appearing.
-Press the reset switch **twice** during this time to complete the firmware writing.
-Depending on the ProMicro, it may be one time.
+you will see the following output (`.`'s progressively appearing).
+Press the reset switch **twice** or short **GND & RST** pins on ProMicro during this time to complete the firmware writing.
+Depending on the ProMicro, it may be only require pressing reset switch once.
 
 ```
-<Omitted>
-
 Checking file size of crkbd_rev1_default.hex [OK]
  * File size is fine-27328/28672
 Copying crkbd_rev1_default.hex to qmk_firmware folder [OK]
@@ -95,9 +92,9 @@ When VIA is opened with the keyboard plugged in, the following window will appea
 
 ![via_begin](assets/via_begin.jpg)
 
-### KEYMAP / CONFIGURE
+### Configure
 
-In this screen, you can change the key map.
+In this screen, you can change the keymap.
 
 There are several types of keys that can be changed
 and you can find them in the "1" area.
@@ -107,7 +104,7 @@ VIA instantly changes the keymap.
 
 ![via_keymap_configure](assets/via_keymap_configure.jpg)
 
-### KEYMAP / TESTER
+### Tester
 
 In this screen, you can test the operation of the keymap.
 
@@ -121,7 +118,7 @@ It is easier to check the operation of each switch after build.
 
 ![via_keymap_tester_matrix](assets/via_keymap_tester_matrix.jpg)
 
-### LIGHTING
+### Lighting
 
 In this screen, you can change the pattern and color of the LEDs.