Kabbone/corne
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

initial

Browse Source
This commit is contained in:
jack
2022-03-15 23:05:16 -06:00
parent 381b68f7eb
commit fb4dc70b4d
3 changed files with 1673 additions and 30 deletions
Download Patch File Download Diff File Expand all files Collapse all files

25
corne-cherry/doc/v3/buildguide_en.md
View File

@@ -13,10 +13,10 @@ https://github.com/foostan/crkbd/blob/master/corne-cherry/doc/v2/buildguide_en.m
| PCB | 1 set | |
| Top plate | 2 sheets | |
| Bottom plate | 2 sheets | |
| OLED protective plate | 2 sheets | |
| ProMicro | 2 sheets | |
| OLED cover | 2 sheets | |
| ProMicro | 2 | |
| TRRS jack | 2 | |
| Tact switch | 2 | |
| Reset switch | 2 | |
| Diodes | 42 | Only SMD parts are supported |
| PCB sockets | 42 | Compatible with Kailh and Gateron |
| Key switches | 42 | Only compatible with CherryMX |
@@ -24,7 +24,7 @@ https://github.com/foostan/crkbd/blob/master/corne-cherry/doc/v2/buildguide_en.m
| Spacer M2 7.5mm | 10 pieces | |
| Spacer M2 9mm | 4 pieces | |
| Screw M2 4mm | 28 screws | |
| Cushion rubber | 8 pieces | |
| Rubber feet | 8 pieces | |
| TRRS (4 poles) cable | 1 | TRS (3 poles) cable is also acceptable |
| Micro USB cable | 1 | |
@@ -32,17 +32,17 @@ https://github.com/foostan/crkbd/blob/master/corne-cherry/doc/v2/buildguide_en.m
| Name | Count | Remarks |
|:-|:-|:-|
| OLED module | 2 sheets | |
| OLED module | 2 | |
| Pin header for OLED module 4 series 1.5mm | 2 | |
| 4 pin sockets for OLED module 2.5mm | 2 | |
| SK6812MINI-E | 42 pieces | LEDs for Back light |
| WS2812B | 12 | LEDs for Undergrow |
## Advance preparation
## Firmware preparation
If you build the firmware yourself,
it will take some time to set up the environment,
so it's best to start at the beginning. \
If you build the firmware yourself, it will take some time to set up the environment,
so it's best to start at the beginning.
It is recommended to flash ProMicro's prior to soldering.
For more information,
please see <https://github.com/foostan/crkbd/blob/master/doc/firmware_en.md>.
@@ -191,7 +191,7 @@ or fix it with masking tape and then solder it.
### ProMicro
Solder ProMicro in the following orientation
Solder headers to PCB. Then solder ProMicro to headers, with components facing PCB
![build_promicro](assets/build_promicro.jpg)
@@ -212,11 +212,6 @@ so be careful not to float it while pressing it with your finger.
![build_oled](assets/build_oled.jpg)
### Firmware
Write the firmware to ProMicro by referring to the following. \
<https://github.com/foostan/crkbd/blob/master/doc/firmware_en.md>
### Operation check
We recommend that you check the operation when the ProMicro and OLED module are attached.