From 51ef5e4c2cf2a236f72d7e0948e94dea85eebe07 Mon Sep 17 00:00:00 2001 From: Johan Persson Date: Thu, 10 Oct 2019 16:32:39 +0200 Subject: [PATCH] Added clearer ProMicro orientation instructions to the english build guide. --- corne-classic/doc/buildguide_en.md | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/corne-classic/doc/buildguide_en.md b/corne-classic/doc/buildguide_en.md index 85a8fd0..c31891f 100644 --- a/corne-classic/doc/buildguide_en.md +++ b/corne-classic/doc/buildguide_en.md @@ -88,11 +88,14 @@ For OLEDs, also implement pin sockets. ### ProMicro -Implement pin headers in the white frame, then install ProMicro with its backside up. (The picture is the right hand side, but it's the same for the left hand side - pins into the through holes in the white frame, backside up.) +Before you start, flash the Crkbd firmware to the ProMicros to make sure they are alright. +The ProMicro is then installed __in the set of wholes that has a white frame on the frontside of the PCB__. Make sure you solder it in the right set of holes, as desoldering the ProMicro is hard. Implement pin headers in the white frame, then install ProMicro with its __backside up__. ![image](https://user-images.githubusercontent.com/736191/40737973-3f404de4-647d-11e8-84fe-37f3a34e4c53.png) +The picture is the right hand side, but it's the same for the left hand side - pins into the through holes in the white frame as seen from the frontside, placing the ProMicro with its backside up. + ### OLED Module Implement pin header onto the OLED modules, then insert them into the pin sockets.